Hi All,
Checking this for a member of the list.
Rick
___
This message is from the Framers mailing list
Send messages to framers@lists.frameusers.com
Visit the list's homepage at http://www.frameusers.com
Archives located at http://www
Yes, as long as you define the desired formatting as FrameMaker Character
Formats. Then you can refer to them in your variable definitions inside of
angled brackets; for example:
Widget
The is a shortcut for Default Paragraph Font.
Rick
-Original Message-
From: Framers On
Behalf Of
respond with. Thanks.
Rick
-Original Message-
From: Framers On
Behalf Of cuc tu
Sent: Friday, March 1, 2024 4:52 PM
To: framers@lists.frameusers.com
Subject: [Framers] Back on Structured XML - stuck again
Hey all - it's been a long while since even using FrameMaker.
Quick Backg
Hi Simon,
FrameMaker 2019 shipped with 32- and 64-bit versions. I don't know what
version you are using, but the 64-bit version might work.
Since you are using ExtendScript, an alternative approach may be to script
saving each component to XML individually then use XSLT to combine them.
Hi Tammy,
I am sending you a video link that I think shows the solution. It is a private
link because I am not sure if the content of your file should be shared. If my
solution is correct, perhaps you can share it with the list.
Rick
-Original Message-
From: Framers On
Behalf Of
Hi Alison,
See my ConvertDocs script at www.frameexpert.com/store.
Rick
-Original Message-
From: Framers On
Behalf Of acr...@shaw.ca
Sent: Wednesday, November 22, 2023 2:05 PM
To: framers@lists.frameusers.com
Subject: [Framers] Batch conversion from Frame 2022 *down* to Frame 2020
Hi Alison,
You have to set your numbering at the book component level, not the document
level. Right-click on the components and set the numbering there and then
update the book.
Rick
-Original Message-
From: Framers On
Behalf Of acr...@shaw.ca
Sent: Sunday, November 19, 2023 8:12 PM
and I. Rick, when can we set up a 15 minute
meeting to do the hand off and ask any questions that we have?
Thanks!
TVB
Tammy Van Boening
Tammy dot vanboening at spectrumwritingllc dot com
www.spectrumwritingllc.com
> -Original Message-
> From: Framers bounces+tammyvb=spectrumwrit
Hi All,
I am pretty sure I have the login information for the list. To be honest, I
tend to use the Adobe Forums for post and answer FrameMaker questions. I do
like the availability of this list too.
Rick
-Original Message-
From: Framers On
Behalf Of Tammy Van Boening
Sent: Thursday
I added a Free Scripts playlist on my YouTube channel:
https://www.youtube.com/playlist?list=PLRPNZaAC4LoRPnVZcKcNgAeIlb3UhgvvK
As always, comments and suggestions are welcome. Thank you!
Rick
___
This message is from the Framers mailing list
Send
Hi All,
Take a look at my comprehensive FrameMaker Generated Files videos on
YouTube:
https://www.youtube.com/playlist?list=PLRPNZaAC4LoRu8VxIaUK5eV_lqmG80qUj
If the content is helpful, please like and subscribe. Thank you!
Rick
Rick Quatro
Carmen Publishing Inc.
www.frameexpert.com <h
Hi All,
I found and fixed the problem that Tom was having. Here is a link to the
updated script:
http://www.rickquatro.com/resources/CP-TableChangeBars.zip
Rick
-Original Message-
From: Framers On
Behalf Of de Rouck, Tom (Zelzate)
Sent: Monday, August 28, 2023 1:34 AM
To: framers
onsole message and I
will fix the script. Thank you very much for the feedback.
Rick
-Original Message-
From: Framers On
Behalf Of de Rouck, Tom (Zelzate)
Sent: Monday, August 28, 2023 1:34 AM
To: framers@lists.frameusers.com
Subject: Re: [Framers] A free script for adding changebars to tabl
appreciated.
Rick
www.frameexpert.com
___
This message is from the Framers mailing list
Send messages to framers@lists.frameusers.com
Visit the list's homepage at http://www.frameusers.com
Archives located at http://www.mail-archive.com/fr
Thank you Mike! The issue is the behind the scenes switch to the Adobe PDF
printer driver when the PDF is created. The PDFs are created on a dedicated
computer, so I should be able to solve it by changing the default printer
driver to Adobe PDF.
___
erties in FrameMaker and Acrobat show
that they are both Calibri 9 point. I have seen this message in the past,
but the reflow is a big problem for this project. Is there a setting that
will give me an exact FrameMaker to PDF text match?
Rick
___
This
Hi All,
What is Adobe's preferred screen recording software? Is it still Captivate?
Is there anything in the Creative Suite designed for this? Thank you.
Rick
Rick Quatro
r...@frameexpert.com <mailto:r...@frameexpert.com>
www.frameexper
You can't increment variables with counters. This may be a good candidate
for a script. It's not clear to me the use case for this, but if you contact
me offlist, I will be glad to look at it. Thanks.
Rick
-Original Message-
From: Framers On
Behalf Of David Artman
Sent: Satu
Hi Alison,
I can try opening it here if you can zip and send it to me. Thank you.
Rick
-Original Message-
From: Framers On
Behalf Of Craig, Alison GLI/CA
Sent: Friday, June 16, 2023 2:08 PM
To: framers@lists.frameusers.com
Subject: [Framers] MIF File Issue
Win10, Frame 2020 (V
k you for your support over the years. The FrameMaker community is the
best!
Rick
http://give.roswellpark.org/goto/rickq
<https://give.roswellpark.org/site/TR/SpecialEvents/General?px=1044233&pg=pe
rsonal&fr_id=1830>
www.frameexpert.com <http
I think XHTML output was added later.
-Original Message-
From: Framers On
Behalf Of Johan Anglemark
Sent: Monday, April 24, 2023 11:09 AM
To: framers@lists.frameusers.com
Subject: Re: [Framers] Frame > XHTML
Hi Rick,
The Publish pod is there, but no XHTML output format.
Hi Johan,
I can't remember if 2015 had it, but is there a File > Publish command? If
so, see if the Publish pod has an XHTML option.
Rick
-Original Message-
From: Framers On
Behalf Of Johan Anglemark
Sent: Monday, April 24, 2023 10:21 AM
To: An email list for people usi
Post this question to the Adobe Forums for FrameMaker and I will provide a
useful workaround. Thanks.
Rick
-Original Message-
From: Framers On
Behalf Of Sue Thomson (Specialist RF)
Sent: Tuesday, January 31, 2023 5:45 AM
To: framers@lists.frameusers.com
Subject: [Framers] Variable
I hadn't noticed until you mentioned it, but the list is pretty quiet. I am
spending more time on Adobe Forums these days.
-Original Message-
From: Framers On
Behalf Of Syed Zaeem Hosain
Sent: Wednesday, January 11, 2023 10:18 PM
To: framers@lists.frameusers.com
Subject: [Framers] Have no
I am not sure this got answered, but you can use \r in a variable to force a
page break.
-Original Message-
From: Framers On
Behalf Of Craig, Alison GLI/CA
Sent: Friday, September 23, 2022 2:28 PM
To: An email list for people using Adobe FrameMaker software.
Subject: [Framers] Insert Man
Hi C2,
If those elements have attributes you can use the Filter By Attribute
command to filter them out before you print or make a PDF. Then they will be
retained in the XML.
Rick
-Original Message-
From: Framers On
Behalf Of cuc tu
Sent: Monday, August 8, 2022 2:24 PM
To: framers
Thank you Tom. Alison, it is the script called ConvertDocs. See my store for
details. Thank you very much.
Rick
Rick Quatro
Carmen Publishing Inc.
585-729-6746
r...@frameexpert.com
http://www.frameexpert.com/store
-Original Message-
From: Framers On
Behalf Of Tom Beiswenger
Sent
Thank you all who contributed to the Ride for Roswell 2022. Over $5.6
million was raised for cancer treatment and research. I finished the 100
miles in 6:35, including 4 rest stops. It was a great ride and a great
event. Lord willing, I will do it again next year!
_
Totally agree. FrameSLT is a great tool. Sue, if you need help getting up to
speed with it, I will gladly provide some no-cost help via a web meeting.
Rick
-Original Message-
From: Framers On
Behalf Of Scott Prentice
Sent: Monday, May 30, 2022 4:10 PM
To: An email list for people
@lists.frameusers.com
Subject: [Framers] Klaus, Rick, and Scott rock!
Hello, Framers,
Just wanted to give a huge thank-you to Klaus Daube. Rick Quatro, and Scott
Prentice for all their sharing of knowledge that makes using FrameMaker a
joy instead of a frustrating experience.
As I noted to the list a few weeks
Hi Winfried,
You can only programmatically "pull up" or "push down" to another version.
So, she would need to run my script on FrameMaker 2020 to pull the
FrameMaker 7 files up to the current version.
Rick
-Original Message-
From: Framers On
Behalf Of Reng Winfried
Hi Wendy,
If you want a batch process, take a look at my ConvertDocs script at my web
store. Thanks.
Rick
Rick Quatro
Carmen Publishing Inc.
585-729-6746
r...@frameexpert.com
http://www.frameexpert.com/store
___
This message is from the Framers
There should be a <$paranum> building block that picks up the entire
autonumber.
-Original Message-
From: Framers On
Behalf Of Tom Beiswenger
Sent: Thursday, April 14, 2022 9:29 AM
To: An email list for people using Adobe FrameMaker software.
Subject: [Framers] Fixing table number in a c
As Lynne said, because FrameMaker has a built-in, enterprise-level XSLT
processor, you can specify XSLT stylesheets on import and export as part of
your structured application.
___
This message is from the Framers mailing list
Send messages to framers@
You can also go in the other direction. Input:
:SYSTem:COMMunicate:TCP:IP:ADDRess
Outputs the IP address of the Ethernet
interface.
XSLT stylesheet:
http://www.w3.org/1999/XSL/Transform";
xmlns:xs="http://www.w3.org/2001/XMLSchema";
xmlns:math="http://www.w3.org/2005/xpath-func
Here is an example. Input:
XSLT stylesheet:
http://www.w3.org/1999/XSL/Transform";
xmlns:xs="http://www.w3.org/2001/XMLSchema";
xmlns:math="http://www.w3.org/2005/xpath-functions/math";
exclude-result-prefixes="xs math"
version="3.0" expand-text="yes">
. Be creative with
your ideas and let's see what we can do! I will take care of riding the 100
miles on June 25th. Thank you!
Rick
Rick Quatro
Carmen Publishing Inc.
585-729-6746
r...@frameexpert.com
http://www.frameexpert.com/store
___
This me
Because they may need high-quality PDF and print output.
-Original Message-
From: Framers On
Behalf Of Robert Lauriston
Sent: Wednesday, March 23, 2022 2:08 PM
To: An email list for people using Adobe FrameMaker software.
Subject: Re: [Framers] Another Simple Structured App
Also, if you
Hi C2,
If you can mock up a sample of your output XML, even if it is not final, I
can show you how it would work. Thanks.
Rick
-Original Message-
From: Framers On
Behalf Of cuc tu
Sent: Tuesday, March 22, 2022 4:41 PM
To: framers@lists.frameusers.com
Subject: Re: [Framers] Another
Do you have the EDD set up yet for the output FrameMaker document?
-Original Message-
From: Framers On
Behalf Of cuc tu
Sent: Tuesday, March 22, 2022 11:06 AM
To: framers@lists.frameusers.com
Subject: [Framers] Another Simple Structured App
Hi Framers,
Our engineering group is giving me
Hi C2,
You can apply an XSLT stylesheet automatically on import or export (or
both). The stylesheet file would be part of your custom structured
application. XSLT allows you completely transform your XML, including
changing the order of elements, converting attributes to elements, etc.
Rick
CDW is a reputable company. One thing to check: 2019 was available as a
32-bit or 64-bit program. I am not sure of both shipped in the same box, but
you should get the 64-bit version if you want to take advantage of more
memory, etc. Be aware though, that any existing 32-bit plugins that you
might
this what is happening
to you? Thanks.
Rick
-Original Message-
From: Framers On
Behalf Of Wendy McGovern
Sent: Thursday, February 17, 2022 7:57 AM
To: framers@lists.frameusers.com
Subject: [Framers] Old problem with scrolling in Frame
Hi, Framers,
I am having a problem with my mouse scro
Hi Wim,
Thank you very much. I will reach out to Alex and see what he is doing in this
space. I hope you are doing well.
Best regards,
Rick
From: Wim Hooghwinkel
Sent: Friday, January 28, 2022 4:06 AM
To: r...@rickquatro.com
Cc: Framers
Subject: Aircraft DTDs, schemas, or EDDs
Hi Ian,
Thank you for your reply. My client actually wants them in XML, but starting
with the SGML DTD might be better than starting from scratch.
I would even be content with obtaining some structured FrameMaker sample
chapters because I could extract the EDDs from them.
Thanks again,
Rick
Hi All,
I have a project now to build a new AMM, IPC manual set for a B747-400. I
would like to find existing DTDs, schemas, or FrameMaker EDDs for these
types of manuals. Any pointers would be appreciated. Thank you.
Rick Quatro
Carmen Publishing Inc.
585-729-6746
r...@frameexpert.com
>From former list mom, Carol Elkins:
I have the original User Guides for Framemaker 5, 5.5, 6, and 7 that I am
willing to give to anyone who is willing to pay the shipping costs. These
are big, heavy books, and shipping will run about $5/book.
I also have a copy of "Advanced Framemaker" wri
Here is a link to an interesting article that mentions FrameMaker and shows
a screenshot of version 3.0:
https://blog.mozilla.org/en/internet-culture/why-are-hyperlinks-blue-revisit
ed/
Rick Quatro
Carmen Publishing Inc.
585-729-6746
r...@frameexpert.com <mailto:r...@frameexpert.
This is not really a bug but a "feature," at least according to the FrameMaker
documentation. I posted some information, including screenshots, on the Adobe
Forums.
https://community.adobe.com/t5/framemaker-discussions/broken-toc-links/m-p/12602277#M73178
Rick
-Original Message
Hi Tammy,
There should be a .log file in the folder. Can you grab that and post the
contents of the file? Thanks.
Rick
-Original Message-
From: Framers On
Behalf Of tamm...@spectrumwritingllc.com
Sent: Thursday, December 9, 2021 9:32 PM
To: framers@lists.frameusers.com
Subject
Can you post a screenshot of the page with the borders showing?
-Original Message-
From: Framers On
Behalf Of cuc tu
Sent: Wednesday, November 3, 2021 3:23 PM
To: framers@lists.frameusers.com
Subject: [Framers] Graphic Getting Cut Off
Hi All,
We have a mysterious graphic issue. We place
. Thank you.
Rick Quatro
Carmen Publishing Inc.
585-729-6746
r...@frameexpert.com <mailto:r...@frameexpert.com>
http://www.frameexpert.com/store
___
This message is from the Framers mailing list
Send messages to framers@lists.frameuse
Hi Dan,
The perpetual licenses still "phone home" to Adobe's licensing servers, so you
are not necessarily immune to this type of thing in the future.
Rick Quatro
Carmen Publishing Inc.
585-729-6746
r...@frameexpert.com
http://www.frameexpert.com/store
-Original Me
Hi All,
Off topic question here, but my online store vendor is dropping me because
of lower volume. Any recommendations for a new vendor would be appreciated.
It needs to be a place where people can purchase and download software.
Thank you very much.
Rick Quatro
Carmen Publishing Inc
Hi Karen,
FYI, if this is an ongoing requirement, it could be scripted to maintain all
of the paragraph formats when converting to a table. If you are interested
in a script solution, please contact me offlist. Thank you.
Rick
Rick Quatro
Carmen Publishing Inc.
585-729-6746
r...@frameexpert.com
tware.'
Subject: Re: [Framers] Appearance of graphics in the generated PDF [No
Classification]
Hey Rick, Did this ever go anywhere w/ you at all? Thanks! TVB Tammy Van
Boening Principal/Owner Spectrum Writing, LLC www.spectrumwritingllc.com
303-840-1755 -Original Message- From: Framers On B
Some of us use both, so it could be useful information.
-Original Message-
From: Framers On
Behalf Of Syed Zaeem Hosain
Sent: Friday, August 20, 2021 9:55 PM
To: An email list for people using Adobe FrameMaker software.
Subject: Re: [Framers] Importing InDesign IDML into two tools. Was
Hi Karen,
Do you get the tags if you use File > Publish? Thanks.
Rick
Rick Quatro
Carmen Publishing Inc.
585-729-6746
r...@frameexpert.com
http://www.frameexpert.com/store
-Original Message-
From: Framers On
Behalf Of Karen Robbins
Sent: Tuesday, August 17, 2021 6:09 PM
To: fram
Please send me one of your Word documents offlist. Thanks.
___
This message is from the Framers mailing list
Send messages to framers@lists.frameusers.com
Visit the list's homepage at http://www.frameusers.com
Archives located at http://www.mail-arch
That might be worth exploring. I did find a word add-on that converts all
equations to images. If the image quality can be controlled on export from
Word, this may be the way to go. Or, this may work:
1) Convert equations to images.
2) Convert Word to PDF.
3) Extract images from the PDF.
-Ori
happy to
be part of the FrameMaker community. Thanks again!
Rick
Rick Quatro
Carmen Publishing Inc.
585-729-6746
r...@frameexpert.com <mailto:r...@frameexpert.com>
http://www.frameexpert.com/store
___
This message is from the F
Here is a summary of the issue:
Equations originate from the client in MS Word.
Tammy wants to save the equations as images for import into FrameMaker.
The fastest way to do this is to save the Word file as HTML because it
rasterizes the equations as PNG files for inclusion in the HTML. The prob
Hi,
Is IXgen being updated for 64-bit versions of FrameMaker? Thanks.
Rick
Rick Quatro
Carmen Publishing Inc.
585-729-6746
r...@frameexpert.com <mailto:r...@frameexpert.com>
http://www.frameexpert.com/store
___
This mess
f what you would like to present as a generated file from the data.
The document set needs to be something that I can show to others. In
exchange for a good document set and permission to use it in a case study, I
will give you the scripts to produce the generated file for free. Thank you
very much
was
easy. Thanks for posting the link.
Rick Quatro
Carmen Publishing Inc.
585-729-6746
r...@frameexpert.com
http://www.frameexpert.com/store
-Original Message-
From: Framers On
Behalf Of Shmuel Wolfson
Sent: Thursday, July 15, 2021 4:38 AM
To: Techshoret List ; Framers List
Subject
Thank you everyone for all of the love and appreciation. In reality, Carol
has done all of the work and has been a great list mom and friend. The Frame
community has some great people in it and I enjoy being a part of it.
Rick
___
This message is from
Hi Peter,
My ArchiveES was written as a replacement for (and tribute to) Bruce
Foster's Archive plugin.
Rick
Rick Quatro
Carmen Publishing Inc.
585-729-6746
r...@frameexpert.com
http://www.frameexpert.com/store
-Original Message-
From: Framers On
Behalf Of Peter Gold
Sent: Thu
!
http://give.roswellpark.org/goto/rick-quatro
My store is at
http://www.frameexpert.com/store
Rick
Rick Quatro
Carmen Publishing Inc.
585-729-6746
r...@frameexpert.com
http://www.frameexpert.com/store
-Original Message-
From: Framers On
Behalf Of Tom Beiswenger
Sent: Thursday, June
and your link color. This should be more
reliable than applying two separate character formats to the number.
Rick Quatro
Carmen Publishing Inc.
585-729-6746
r...@frameexpert.com
http://www.frameexpert.com/store
-Original Message-
From: Framers On
Behalf Of tamm
Starting with FrameMaker 2019, FrameMaker is 64-bit so you can throw more
RAM at it. I suggest 32 Gb at a minimum. There is also a faster PDF engine
starting with 2019. To be sure that it will improve your process, you may
want to download and install the latest trial and see what kind of
improveme
Hi Carla,
I am sorry for not looking closely enough. Can you try at insertion point
and right-align the anchor paragraph?
Rick
-Original Message-
From: Framers On
Behalf Of Martinek, Carla
Sent: Monday, March 8, 2021 9:02 AM
To: An email list for people using Adobe FrameMaker software
Carla, can you put a little cell padding on the right of those cells? You
shouldn't need much.
-Original Message-
From: Framers On
Behalf Of Martinek, Carla
Sent: Friday, March 5, 2021 4:03 PM
To: framers@lists.frameusers.com
Subject: [Framers] Anchored Frame in Table Cell is hiding borde
interface.
Rick
Rick Quatro
Carmen Publishing Inc.
585-729-6746
r...@frameexpert.com
http://www.frameexpert.com/store
-Original Message-
From: Framers On
Behalf Of Sparky Anderson
Sent: Friday, December 18, 2020 12:30 PM
To: An email list for people using Adobe FrameMaker software
A script could be used to convert the cross-references to Hypertext links.
Please contact me off-list if you are interested in exploring this. Thank
you very much.
Rick Quatro
Carmen Publishing Inc.
585-729-6746
r...@frameexpert.com
http://www.frameexpert.com/store
recent versions, but
I loved the simplicity of the pre-Adobe interface.
Rick Quatro
Carmen Publishing Inc.
585-729-6746
r...@frameexpert.com
http://www.frameexpert.com/store
-Original Message-
From: Framers On
Behalf Of Steve Rickaby
Sent: Monday, October 5, 2020 8:31 AM
To: An email list f
Hi Patrick,
The short answer is yes, if you position the anchored frames at insertion point
or outside the text column or frame.
Rick
-Original Message-
From: Framers On
Behalf Of Edwards, Patrick H
Sent: Friday, June 12, 2020 9:54 AM
To: An email list for people using Adobe
What version of FrameMaker are you using? If you have the PDF Setup dialog
box, make sure you check the "Create Named Destinations for All Elements and
Paragraphs" checked in the Links tab of the dialog box.
-Original Message-
From: Framers On
Behalf Of barry.meis...@nuvoton.com
Sent: Thu
Is this what you have for the title?
# end of Notes
> # end of ParaLine
> # end of Para
> # end of TblTitleContent
> # end of TblTitle
-Original Message-
From: Framers On
Behalf Of Orly Zimmerman
Sent: Thursday, April 30, 2020 3:31 PM
To: framers@l
not be deleted.
2) Any empty pages that have any non-master page items on them will not be
deleted. This includes non-main flow text frames, graphic objects, etc. that
are directly on the page.
Rick Quatro
Carmen Publishing Inc.
r...@frameexpert.com
585-729-6746
www.frameexpert.com/store/
!
Rick
Rick Quatro
Carmen Publishing Inc.
r...@frameexpert.com
585-729-6746
www.frameexpert.com/store/
___
This message is from the Framers mailing list
Send messages to framers@lists.frameusers.com
Visit the list's homepage at
Hi Carol,
Thank you very much! I hope you are safe and well. I will keep you in mind
for FrameMaker projects. We are doing well here so far. Thanks again!
http://www.rickquatro.com/resources/ImportSelectedFormats_1_2.zip
Rick
-Original Message-
From: Framers On
Behalf Of Carol J
Hello Framers,
I have updated my ImportSelectedFormats script by adding more format types.
More information is here:
http://frameautomation.com/importing-selected-formats/
Thank you!
Rick
Rick Quatro
Carmen Publishing Inc.
r...@frameexpert.com
585-729-6746
://www.frameexpert.com/store/
Thanks,
Rick
-Original Message-
From: Framers On
Behalf Of Tom Beiswenger
Sent: Monday, March 30, 2020 3:08 PM
To: Frameusers List
Subject: Re: [Framers] [EXTERNAL] ANN: Ride for Roswell and FrameMaker
Automation
Rick,
I can think of a script that would be useful (and
appreciate suggestions for other automation
scripts. Thank you very much.
http://frameautomation.com/ride-for-roswell-2020/
Rick
Rick Quatro
Carmen Publishing Inc.
r...@frameexpert.com
585-729-6746
www.frameexpert.com/store
two.
Thanks.
Rick
-Original Message-
From: Framers On
Behalf Of Lin Sims
Sent: Thursday, March 26, 2020 5:19 PM
To: An email list for people using Adobe FrameMaker software.
Subject: Re: [Framers] Best way to import/add select paragraph formats?
So, Rick, when will this be available in
Hi Jason,
I have an unreleased script that will do this. Contact me off list and I
will send you the documentation. Thank you very much.
Rick
Rick Quatro
Carmen Publishing Inc.
r...@frameexpert.com
585-729-6746
www.frameexpert.com/store/
-Original Message-
From: Framers On
Behalf Of
Thank you,
Rick
Rick Quatro
Carmen Publishing Inc.
r...@frameexpert.com
585-729-6746
www.frameexpert.com/store/
___
This message is from the Framers mailing list
Send messages to framers@lists.frameusers.com
Visit the list's hom
Hi Brenda,
You set up context rules in the EDD. Please contact me off-list of you want
to meet and I will give you a walkthrough.
Rick
Rick Quatro
Carmen Publishing Inc.
r...@frameexpert.com
585-729-6746
www.frameexpert.com/store/
-Original Message-
From: Framers On
Behalf Of George
desktops, tablets, and phones takes a deeper level of skill than just
learning a tool like Flare or FrameMaker.
Rick Quatro
Carmen Publishing Inc.
r...@frameexpert.com
585-729-6746
www.frameexpert.com/store/
-Original Message-
From: Framers On
Behalf Of Carol J. Elkins
Sent: Friday
Open a blank, Portrait document and insert a Shaded Blue table. Click in the
table and open the Table Designer. Go to the Shading tab and you will see
how it is set up.
Rick Quatro
Carmen Publishing Inc.
r...@frameexpert.com
585-729-6746
www.frameexpert.com/store/
-Original Message
FYI: I am currently using FrameMaker 12 to do a structured project for a
client. FrameMaker 12 is certainly capable of working with structured
documents.
Rick Quatro
Carmen Publishing Inc.
r...@frameexpert.com
585-729-6746
www.frameexpert.com/store/
-Original Message-
From: Framers On
Hi,
I am using structured FrameMaker 2019 and have Table Continuation variables
wrapped in a element. When I save as XML, this element
gets output without a closing tag and this causes parser errors. Any idea
why? Thanks.
Rick
Rick Quatro
Carmen Publishing Inc.
r...@frameexpert.com
k like this:
Chapter H:<$chapnum>< =0>< =0>< =0>< =0>< =0>
H1H:<$chapnum>.< =0>< =0>< >< >
H2H:<$chapnum>..< =0>< >< >
H3H:<$chapnum>...< >&
Hi John,
Can we have a quick web meeting instead? It would be easier than packaging
up the book. Let me know what time and I will send you a meeting link. I am
on Eastern Standard Time. Thanks.
Rick
-Original Message-
From: Framers On
Behalf Of John Posada
Sent: Friday, January 03
http://frameautomation.com/framemaker-autonumber-primer/
http://frameautomation.com/advanced-autonumber-concepts/
You can probably go directly to the second video.
Rick Quatro
Carmen Publishing Inc.
r...@frameexpert.com
585-729-6746
www.frameexpert.com/store/
-Original Message-
From
specify
the paragraph formats that you want to process. If you are interested, I may
be able to add this as an enhancement.
Rick
Rick Quatro
Carmen Publishing Inc.
r...@frameexpert.com
585-729-6746
www.frameexpert.com/store/
___
This message is from the
at it. Thanks.
Rick
Rick Quatro
Carmen Publishing Inc.
r...@frameexpert.com
585-729-6746
www.frameexpert.com/store/
-Original Message-
From: Framers On
Behalf Of Orly Zimmerman
Sent: Tuesday, December 31, 2019 3:56 PM
To: framers@lists.frameusers.com
Subject: [Framers] How to format
Craig
Sent: Wednesday, December 18, 2019 12:54 PM
To: An email list for people using Adobe FrameMaker software.
; Rick Quatro
Subject: Re: [Framers] Backup in different folder?
I've worked for many a "penny wise and pound foolish" employer over the years...
Alison
Speaking for myself, I say lazy and hard-headed. I can't stand doing "monkey
work." Automation has made work more tolerable and efficient for clients and
me. When a potential client tells me that they can't spend money on scripts,
I wonder if their managers know how much time and accuracy is lost t
I posted a free script that will do this for you on my blog. Any questions or
comments are welcome.
http://frameautomation.com/automatic-backup-on-save/
Rick
Rick Quatro
Carmen Publishing Inc.
r...@frameexpert.com
585-729-6746
www.frameexpert.com/store
1 - 100 of 2541 matches
Mail list logo