Am Tue, 16 Sep 2014 08:40:25 -0700
Adrian Chadd schrieb:
> Ah, jumbo frames. Maybe you got lucky and some ethernet drivers
> default to accepting larger frames even if the MTU is 1500.
>
>
> -a
After all, I managed to get the NIC up and running. But the culprit is that I
have to
take the NIC
On 09/18/14 09:58, O. Hartmann wrote:
> Am Tue, 16 Sep 2014 08:40:25 -0700
> Adrian Chadd schrieb:
>
>> Ah, jumbo frames. Maybe you got lucky and some ethernet drivers
>> default to accepting larger frames even if the MTU is 1500.
>>
>>
>> -a
>
>
> After all, I managed to get the NIC up and run
Am Thu, 18 Sep 2014 10:17:08 +0200
Guido Falsi schrieb:
> On 09/18/14 09:58, O. Hartmann wrote:
> > Am Tue, 16 Sep 2014 08:40:25 -0700
> > Adrian Chadd schrieb:
> >
> >> Ah, jumbo frames. Maybe you got lucky and some ethernet drivers
> >> default to accepting larger frames even if the MTU is 15
Running FreeBSD 11.0-CURRENT #5 r271728: Thu Sep 18 01:18:25 CEST 2014 amd64 on
a Lenovo
ThinkPad Edge E540 laptop with built-in nVidida GT 740M GPU (NV208M) doesn't
bring up X11
even with most recent nVidia BLOB 343.13.
The system has been installed from a most recent FBSD CURRENT USB drive im
Hi,
Is this a known issue?
Happens when invoking a program over and over again in a loop in from a
shell.
--HPS
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail t
On 09/18/14 13:57, Hans Petter Selasky wrote:
Hi,
Is this a known issue?
Happens when invoking a program over and over again in a loop in from a
shell.
--HPS
Backtrace got stripped:
FreeBSD 10.0-RELEASE
panic: page fault
Unread portion of the kernel message buffer:
fault virtual addres
Has anyone got freebsd booting on an intel NUC DN2820FYKH?
It installs fine just wont boot (doesnt see boot loader). I'm doing legacy
not efi mode.
I'm starting to bang my head against the wall on this one. Time to leave it
for a bit i think
___
fre
Hi Hans,
I saw the discussion about TSO, but the GSO is a software
implementation unrelated with the hardware.
Furthermore, if the TSO is enabled (and supported by the NIC), the GSO is
not executed, because is useless.
After the execution of the GSO, the packets, that are passed to the device
driv
On 09/18/14 04:18, O. Hartmann wrote:
Running FreeBSD 11.0-CURRENT #5 r271728: Thu Sep 18 01:18:25 CEST 2014 amd64 on
a Lenovo
ThinkPad Edge E540 laptop with built-in nVidida GT 740M GPU (NV208M) doesn't
bring up X11
even with most recent nVidia BLOB 343.13.
The system has been installed fro
On Thu, Sep 18, 2014 at 7:16 AM, Stefano Garzarella <
stefanogarzare...@gmail.com> wrote:
> I saw the discussion about TSO, but the GSO is a software
> implementation unrelated with the hardware.
> Furthermore, if the TSO is enabled (and supported by the NIC), the GSO is
> not executed, because is
Am Thu, 18 Sep 2014 07:19:45 -0700
Nathan Whitehorn schrieb:
>
> On 09/18/14 04:18, O. Hartmann wrote:
> > Running FreeBSD 11.0-CURRENT #5 r271728: Thu Sep 18 01:18:25 CEST 2014
> > amd64 on a
> > Lenovo ThinkPad Edge E540 laptop with built-in nVidida GT 740M GPU (NV208M)
> > doesn't
> > bring
On 09/17/2014 00:54, Nathan Whitehorn wrote:
Try xf86-video-scfb instead?
I also had the same problem (mentioned in another thread called
"Problems starting X on Mac using vesa, radeon or intel drivers when
running FreeBSD-CURRENT in EFI"), and following your suggestion to
install the xf86-
On Wed, Sep 17, 2014 at 4:27 AM, Stefano Garzarella
wrote:
> Much of the advantage of TSO comes from crossing the network stack only
> once per (large) segment instead of once per 1500-byte frame.
> GSO does the same both for segmentation (TCP) and fragmentation (UDP)
> by doing these operations a
Am Tue, 16 Sep 2014 02:05:41 +0200
"O. Hartmann" schrieb:
>
> Installing FreeBSD-11.0-CURRENT-amd64-20140903-r270990 on a Laptop works for
> UEFI fine.
> After I updated the sources to r271649, recompiled world and kernel (as well
> as
> installed), now I get stuck with the screen message:
>
hmm, got it working by downgrading to v32 firmware. It seems the is a bug
in intels wonderful uefi code, which of course the blame freebsd for 8/
On 18 September 2014 13:05, krad wrote:
> Has anyone got freebsd booting on an intel NUC DN2820FYKH?
>
> It installs fine just wont boot (doesnt see
Hi,
Poudriere's code no longer is based in fossil. It has moved to
https://github.com/freebsd/poudriere. Fossil will not be kept synced.
Please submit patches as pull requests and issues on github going
forward (rather than the old fossil site).
This conversion is not compatible with the existing
16 matches
Mail list logo
