advance.
Douglas Kuntz
- Original Message -
From: "John Polstra" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, January 23, 2000 2:27 PM
Subject: Re: rtld-elf, java + tya
> > ld-elf.so.1: assert failed: /usr/src/libexec/rtld-elf/lockdflt.c:55
>
>
That script(scripts) is part of the Kernel, and not Redhat specific. It has
3 options, too.. make config which is text only (ie: do you want xyz?
(yes/no)), make menuconfig (uses python I think), and make xconfig, so it
works with most peoples preferences. It worked pretty well most of the
time.
and if not, and you
really like the board, and it's a P2/P3 board, you can always get a
Socket370 to Slot1 converter card ("slocket")
Douglas Kuntz
Editor
PC Tech Reports
http://www.pctechreports.com
- Original Message -
From: "Sean Jensen-Grey" <[EMAIL PROTECTED]&
r the clock speed
increase, a P3 is the same as a P2 with just the addition of SIMD
extensions, which I dont think FreeBSD uses yet.
Douglas Kuntz
Editor
PC Tech Reports
http://www.pctechreports.com
- Original Message -
From: "Garrett Wollman" <[EMAIL PROTECTED]>
To: <[EM
ports I've installed)
Douglas Kuntz
Editor
PC Tech Reports
- Original Message -
From: "Dieter Rothacker" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, December 06, 1999 6:22 AM
Subject: Old Libs...?
> Hi,
>
> I have just installed 4.0-SNAP-19
(or worse)
half the time, and I have to remember when to talk/type normally.
Doug
- Original Message -
From: "Mike Smith" <[EMAIL PROTECTED]>
To: "Douglas Kuntz" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Friday, November 26, 1999 3:32 AM
Subje
Before I go do a fresh SNAP install, I wanted to see if there was an easier
way to fix this problem...
My -current box was a celeron...I had to switch the celeron and mboard to my
windoze machine to get a vidcard werkin...I recompiled the kernel to 486,
586, and 686, and moved the HD, the cards, e
ok..disregard my 2nd mail...damn @home takes forever to send out mail
*goes to a corner*
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
Since I dont think my other mail made it through...(since I didnt see it, or
any replys)
Has anyone gotten an Iomega Ditto Max drive to work on 4.0? I have both
types, Floppy/ditto dash card and Parallel port, and would like to use it to
back up my drive every week or so.
Thanks
Douglas
Has anyone had any success using the parallel version of the Iomega Ditto
Max with current, or is there any support for it?
Douglas Kuntz
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
Or...if ya have a nice Cable company doin @home, and they give you an actual
static IP...just set it up like a normal system on a network.
Douglas Kuntz
Systems Administrator
PC Tech Reports
http://www.pctechreports.com
---FreeBSD... The choice of the smart generation---
- Original Message
n0 :
pn0: <82c169 PNIC 10/100BaseTX> irq 10 at device 12.0 on pci0
pn0: Ethernet address: 00:a0:cc:22:dd:4f
pn0: autoneg complete, link status good (full-duplex, 100Mbps)
Is it possible that the card you bought could be defective? (have you tried
under a release or stable build?).
Douglas Kunt
nged (it's been a few months) that could affect
that, or is it just a really strange bug somewhere in the world?
Thanks
Douglas Kuntz
President/CEO - Systems Administrator
MicroNet Information Services - PC Tech Reports
http://www.micronetinfo.com - http://w
13 matches
Mail list logo
