On Mon, Aug 04, 2003 at 10:45:39PM -0700, Stephen Casner wrote:
I tried what I thought might be the equivalent patch (eliminating an
else clause), but it did not solve the problem. In 4.8-RELEASE I
sometimes get a system hang and sometimes not, but even when it does
not hang, I just get
On Tue, 5 Aug 2003, John Birrell wrote:
On Mon, Aug 04, 2003 at 10:45:39PM -0700, Stephen Casner wrote:
I tried what I thought might be the equivalent patch (eliminating an
else clause), but it did not solve the problem. In 4.8-RELEASE I
sometimes get a system hang and sometimes not, but
My question is really about -STABLE rather than -CURRENT, but it
involves a problem recently resolved in -CURRENT.
On Thu, 26 Jun 2003, Bill Paul started this thread regarding failed
support for the Sony PCMCIA CD-ROM drive (NinjaATA-) in releases
since 4.5, including 4.8 and 5.1. You folks
It seems Bill Paul wrote:
In message [EMAIL PROTECTED], M. Warner Losh writes:
Here's a better patch, basesd on wpaul's input. Bill, can you try it
an see if it works for you? If so, i would be better to commit this
one. If not, I'll work with you to fix it.
FYI, I have a no-name
Soeren Schmidt wrote:
I do have problems with the wording you use in the comments
in that patch mentioned below, I will even say that I will remove
that as soon as it appears *and* shoot the committer so it doesn't
happen again to use your choice of wording..
While you are making those
A long time ago, circa FreeBSD 4.3, my Sony PCMCIA CD-ROM drive with
brain-damaged Teac ATA controller drive worked, and the people were
content and all was right with the land. Then my 4.4 CD set arrived,
and I was disappointed to find the install kernel would lock up after
the driver was
Lose the attitude in the patch and email. otherwise it looks good.
I'd rather that we had a table rather than doing the string coparison,
but I can fix that after your commit.
Warner
___
[EMAIL PROTECTED] mailing list
I do have problems with the wording you use in the comments
in that patch mentioned below, I will even say that I will remove
that as soon as it appears *and* shoot the committer so it doesn't
happen again to use your choice of wording..
Now, I dont think this way is productive at all, and would
Here's a better patch, basesd on wpaul's input. Bill, can you try it
an see if it works for you? If so, i would be better to commit this
one. If not, I'll work with you to fix it.
If you are uninterested in working with us to get things in, then your
patch will not lasts the evening as such
In message: [EMAIL PROTECTED]
[EMAIL PROTECTED] (Bill Paul) writes:
: P.S.: Be sure to join us next time when I ream out whoever it was that
: broke support for my 3Com 3c575C cardbus ethernet NIC.
It looks like my 3ccfe575ct is working well as of lasts week's
current.
Any
On Thu, 26 Jun 2003, Bill Paul wrote:
A long time ago, circa FreeBSD 4.3, my Sony PCMCIA CD-ROM drive with
brain-damaged Teac ATA controller drive worked, and the people were
content and all was right with the land. Then my 4.4 CD set arrived,
and I was disappointed to find the install
Here's a better patch, basesd on wpaul's input. Bill, can you try it
an see if it works for you? If so, i would be better to commit this
one. If not, I'll work with you to fix it.
Close, but this doesn't quite do it. I thought something didn't look
right when I read it, and I tested it
- Original Message -
From: Soeren Schmidt [EMAIL PROTECTED]
To: Bill Paul [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED]
Sent: Friday, June 27, 2003 3:03 AM
Subject: Re: Heads up: checking in change to ata-card.c
I do have problems with the wording you use
Schmidt [EMAIL PROTECTED]
To: Bill Paul [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED]
Sent: Friday, June 27, 2003 3:03 AM
Subject: Re: Heads up: checking in change to ata-card.c
I do have problems with the wording you use in the comments
in that patch
In message [EMAIL PROTECTED], M. Warner Losh writes:
Here's a better patch, basesd on wpaul's input. Bill, can you try it
an see if it works for you? If so, i would be better to commit this
one. If not, I'll work with you to fix it.
FYI, I have a no-name (PCMCIA/CD-ROM) drive that also
-Original Message-
From: David Xu [mailto:[EMAIL PROTECTED]
Sent: Thursday, June 26, 2003 6:30 PM
To: Soeren Schmidt; Bill Paul
Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: Re: Heads up: checking in change to ata-card.c
I have another problem different with Bill Paul's
Schmidt; Bill Paul
Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: Re: Heads up: checking in change to ata-card.c
I have another problem different with Bill Paul's.
I have a Tyan Tiger 230T dual CPU MB. On second IDE,
there are MITSUBISHI 52X CDROM as master and a SONY
CD-RW
-Original Message-
From: Julian Elischer [mailto:[EMAIL PROTECTED]
Sent: Thursday, June 26, 2003 7:26 PM
To: Will Saxon
Cc: David Xu; Soeren Schmidt; Bill Paul; [EMAIL PROTECTED];
[EMAIL PROTECTED]
Subject: RE: Heads up: checking in change to ata-card.c
Nvidia (I previously
In message [EMAIL PROTECTED], M. Warner Losh writes:
Here's a better patch, basesd on wpaul's input. Bill, can you try it
an see if it works for you? If so, i would be better to commit this
one. If not, I'll work with you to fix it.
FYI, I have a no-name (PCMCIA/CD-ROM) drive that also
On Thu, Jun 26, 2003 at 01:20:04PM -0600, M. Warner Losh wrote:
In message: [EMAIL PROTECTED]
[EMAIL PROTECTED] (Bill Paul) writes:
: P.S.: Be sure to join us next time when I ream out whoever it was that
: broke support for my 3Com 3c575C cardbus ethernet NIC.
It looks
This works for all my ata-like cards. I've gone ahead and committed
it...
Warner
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to [EMAIL PROTECTED]
On Thu, Jun 26, 2003 at 05:04:10PM -0700, David O'Brien wrote:
On Thu, Jun 26, 2003 at 01:20:04PM -0600, M. Warner Losh wrote:
In message: [EMAIL PROTECTED]
[EMAIL PROTECTED] (Bill Paul) writes:
: P.S.: Be sure to join us next time when I ream out whoever it was that
:
22 matches
Mail list logo