http://www.usenix.org/publications/library/proceedings/ana97/full_papers/souto/paper.html
Does anybody know if something similar to this is available for modern
FreeBSD/Unix? Preferably something in Userland vs. Kernel.
Also, my requirements are significantly more relaxed than a true DSM model
hi all,
how can I set the equiv of -D/-h in /boot.config in a diskless-pxeboot
machine? i think that {rootnfs-server}/boot.config is not read at all.
tia,
danny
PS: 4.2-RELEASE
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the
Danny Braniss ([EMAIL PROTECTED]) wrote:
> hi all,
> how can I set the equiv of -D/-h in /boot.config in a diskless-pxeboot
> machine? i think that {rootnfs-server}/boot.config is not read at all.
>
> tia,
> danny
> PS: 4.2-RELEASE
There's no way to really do it right now, but you c
On Thu, 30 Nov 2000, Tim Tsai wrote:
>
> Also, my requirements are significantly more relaxed than a true DSM model
> (and much more lightweight is preferred).. I really just need synchronized
> views of data on a "reasonable" effort basis (i.e. it's OK if one
> client/peer sees slightly older
Dear, Sirs!
Where I can read about development of drivers for FreeBSD 4.x?
Andrew.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
sorry if this is not the correct list.
this code in rc:
...
case ${update_motd} in
[Nn][Oo] | '')
;;
*)
if T=`mktemp /tmp/_motd.XX`; then
uname -v | sed -e 's,^\([^#]*\) #\(.*
[1-2][0-9][0-9][0-9]\).*/\([^\]*\)
$,\1 (\3) #\2,' > ${T}
awk '{if
make sure the kernel you are booting is the same as the NFS file systems
you are using.
paul
Danny Braniss ([EMAIL PROTECTED]) wrote:
> sorry if this is not the correct list.
>
> this code in rc:
> ...
>
> case ${update_motd} in
> [Nn][Oo] | '')
> ;;
> *)
> if T=`mktemp /tmp/_motd.
On Thu, Nov 30, 2000 at 05:56:57PM +0200, Danny Braniss wrote:
> 1) the cmp -s -> BUS ERROR
> 2) cp ${T} /etc/motd-> cp: /etc/motd: Bad address
>
> now only 2 is happening - go figure :-)
> it also used to, after it went multiuser, to panic when i did the
> cmp -s ${T} /et
}There's no way to really do it right now, but you can use:
}http://people.FreeBSD.org/~jhb/patches/pxekey.patch
}
}This will do the equivalent of -P for pxeboot.
}
thanks,
i added the patches, make BOOT_PXELDR_PROBE_KEYBOARD=1
removed the keyboard, but zero.
i even commented out the ifde
Danny Braniss ([EMAIL PROTECTED]) wrote:
>
> }There's no way to really do it right now, but you can use:
> }http://people.FreeBSD.org/~jhb/patches/pxekey.patch
> }
> }This will do the equivalent of -P for pxeboot.
> }
> thanks,
> i added the patches, make BOOT_PXELDR_PROBE_KEYBOARD=1
> remo
I've tryed to make some example on using pthreads and semaphores and found
that process became blocked if inside of critical section use wait, uwait or
nanowait finctions. In the attached file if change line : (#if 0) to (#if 1)
the program hangs. I've tested it even with gdb and the threads we
At Tue, 28 Nov 2000 18:07:05 +0900,
Tatsumi Hosokawa <[EMAIL PROTECTED]> wrote:
>
>At Tue, 28 Nov 2000 11:01:07 +,
>Kaltashkin Eugene <[EMAIL PROTECTED]> wrote:
>>
>> What dear developers will tell about introduction i18n expansions in sysinstall the
>utility?
>> It would be convenient for
On 30-Nov-00 Paul Saab wrote:
> Danny Braniss ([EMAIL PROTECTED]) wrote:
>> hi all,
>> how can I set the equiv of -D/-h in /boot.config in a diskless-pxeboot
>> machine? i think that {rootnfs-server}/boot.config is not read at all.
>>
>> tia,
>> danny
>> PS: 4.2-RELEASE
>
> There's n
On 30-Nov-00 Danny Braniss wrote:
>
> }There's no way to really do it right now, but you can use:
> }http://people.FreeBSD.org/~jhb/patches/pxekey.patch
> }
> }This will do the equivalent of -P for pxeboot.
> }
> thanks,
> i added the patches, make BOOT_PXELDR_PROBE_KEYBOARD=1
> removed th
What about it? Anyone with skills in this area interested in figuring
out what changed between 4.1 and 4.1.1 probably in the crypto changes
that prevents the MD5 authentication of a skip partner. Worth a quick
$150 prize for the first solution.
Jim Flowers <[EMAIL PROTECTED]>
#4 ISP on C|NET
Nov 30 02:00:21 merry /kernel: nfs send error 32 for server nfs:/lopt
Nov 30 02:00:21 merry /kernel: nfs send error 32 for server nfs:/lopt
Nov 30 05:37:24 merry /kernel: nfs server nfs:/cache: not responding
Nov 30 05:37:24 merry /kernel: nfs server nfs:/cache: is alive again
Nov 30 07:54:56 me
On Nov 30, Dan Phoenix wrote:
>
>
> Nov 30 02:00:21 merry /kernel: nfs send error 32 for server nfs:/lopt
> Nov 30 02:00:21 merry /kernel: nfs send error 32 for server nfs:/lopt
> Nov 30 05:37:24 merry /kernel: nfs server nfs:/cache: not responding
> Nov 30 05:37:24 merry /kernel: nfs server nfs
"Dimitar V. Peikov" wrote:
>
> I've tryed to make some example on using pthreads and semaphores and found
> that process became blocked if inside of critical section use wait, uwait or
> nanowait finctions. In the attached file if change line : (#if 0) to (#if 1)
> the program hangs. I've tested
nfs:/lopt /optnfs -2,-T,-i,rw 0
0
nfs:/cache /cache nfs -2,-T,-i,rw 0
0
those are my mount options from /etc/fstab.
as you can see i have it forced on version 2 with tcp and allow
interuption in read-write mode. -i d
On Thu, Nov 30, 2000 at 02:05:16PM -0800, Dan Phoenix wrote:
>
> nfs:/lopt /optnfs -2,-T,-i,rw 0
> 0
> nfs:/cache /cache nfs -2,-T,-i,rw 0
> 0
>
> those are my mount options from /etc/fstab.
> as you can see i have i
Well, I've gotten pointed to some stuff and am working on a driver for
the Sony SPIC chip, but I have some concerns:
In order to map the device in, you need to poke at the PCI config
registers of the intpm0 chip. This means either having to add this
functionality in to the intpm driver (or at lea
Lame question but from a fresh freebsd install
i plug a serial cable into com1 on freebsd machine
and need to access another machine. Anyone set this up
before? What do I need to do to start this process going?
Any help would be much appreciated...thanks.
---
Dan
+--
Minicom will be installed mode 4511 (setuid) owner uucp, and group dialer.
Is this ok? [y]
Minicom needs to know what device your modem is hanging off of.
I (the porter) have adopted Satoshi Asami's lead of using /dev/modem.
Lets see if you have too...Nope, you haven't (yet).
The patches to
On Thu, Nov 30, 2000 at 02:54:19PM -0800, Dan Phoenix wrote:
> Enter the number X from cuaaX above : cuaa0
> Error: /dev/cuaacuaa0 doesn't exist.
> *** Error code 1
Read what it says: "ENTER THE NUMBER".
Does it say "enter the entire name of the device"?
> i take it from ports collection we ne
Anyone out there have a set of data sheets for the above chips
that they could email me? It looks like all the info pertaining to
these has been pulled from the Cirrus web site (?!?).
Thanks,
--lyndon
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body
Ya ok i feel stupid :(
thx
On Thu, 30 Nov 2000, Bill Fumerola wrote:
> Date: Thu, 30 Nov 2000 17:03:56 -0600
> From: Bill Fumerola <[EMAIL PROTECTED]>
> To: Dan Phoenix <[EMAIL PROTECTED]>
> Cc: [EMAIL PROTECTED]
> Subject: Re: Minicom freebsd howto!
>
> On Thu, Nov 30, 2000 at 02:54:19PM -
> hi all,
> how can I set the equiv of -D/-h in /boot.config in a diskless-pxeboot
> machine? i think that {rootnfs-server}/boot.config is not read at all.
console="comconsole"
in nfs://boot/loader.conf
--
... every activity meets with opposition, everyone who acts has his
rivals and unf
> Well, I've gotten pointed to some stuff and am working on a driver for
> the Sony SPIC chip, but I have some concerns:
>
> In order to map the device in, you need to poke at the PCI config
> registers of the intpm0 chip. This means either having to add this
> functionality in to the intpm drive
A PicoBSD related question [Bcc to -small just in case]
in RELENG_3, the "Filesystem" name associated to a memory disk would
reflect the device it came from, so i had "fd0c" for an image
loaded from floppy, and "wd0c" from a hard disk, etc. I used this
feature to make a few scripts such as "rc" a
Hi Folks,
I've been trying hard to get a FreeBSD system booted via PXE with only
limited success. Maybe someone can have a look at my configs and shed a
little light on this for me.
Here's what happens at boot time:
Intel UNDI, PXE-2.0 (build 067)
Copyright (c) 1997, 1998 Intel Corporatio
Cvsup'd sources (tag=RELEASE_4_2_0) from scratch fail:
===> objdump
...
../libiberty/libiberty.a(choose-temp.o): In function `make_temp_file':
choose-temp.o(.text+0x264): undefined reference to `mkstemps'
Is this a simple fix I hope?
--
Dave Hayes - Consultant - Altadena CA, USA - [EMAIL PR
Dave Hayes wrote:
>
> Cvsup'd sources (tag=RELEASE_4_2_0) from scratch fail:
I don't see a tag=RELEASE_4_2_0. There is a tag=RELENG_4_2_0_RELEASE.
Could this be your problem.
Kent
>
> ===> objdump
> ...
> ../libiberty/libiberty.a(choose-temp.o): In function `make_temp_file':
> choose-temp.o
It appears that the pointer to the root vnode, 'rootvnode' does
not hold a corresponding vnode reference. Here's a fragment of code
from start_init():
/* Get the vnode for '/'. Set p->p_fd->fd_cdir to reference it. */
if (VFS_ROOT(TAILQ_FIRST(&mountlist), &rootvnode))
pa
subscribe freebsd-hackers
-Chris
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
I am seeing a buffer in biodone() with block number 196656 (in
the bp->b_blkno field). This is a buffer containing data from
the raw, character device (bp->b_vp->v_type == VCHR).
(kgdb) p bp->b_lblkno
$36 = 196656
(kgdb) p bp->b_blkno
$37 = 196656
(kgdb) p bp->b_pblkno
$38 = 196719
The bp->b_
On Thu, 30 Nov 2000, Matt Simerson wrote:
> Hi Folks,
>
> I've been trying hard to get a FreeBSD system booted via PXE with only
> limited success. Maybe someone can have a look at my configs and shed a
> little light on this for me.
>
> Here's what happens at boot time:
>
>Intel UNDI, PXE
If someone could give me some pointers/hints on debugging this, it would
be greatly appreciated,
I have an older No-Name Dual 300Mhz 440LX based machine with a Netgear
FA-310Fcx network interface which was running 4.2-Beta cvsupped about 3
weeks ago, I decided to upgrade it to 4.2-STABLE as of t
Hi
We have implemented a device driver on FreeBSD 4.0 and x86 architecture.
The device driver has routines for servicing I/O requests. I understand
that these routines run in the top part of the kernel stack.
The routines have a nesting of 10-12 functions having 10-100 lines each.
Could you tell
Tried it. It didn't appear to work, although it may have been something
silly I did. Basically, I did a:
setenv("LD_LIBRARY_PATH",".",1);
I was hoping to get the loader to use the current directory to find
libraries, so a later call to:
dlopen("foo.so",RTLD_NOW | RTLD_GLOBAL);
would find foo.s
> Hi
>
> We have implemented a device driver on FreeBSD 4.0 and x86 architecture.
> The device driver has routines for servicing I/O requests. I understand
> that these routines run in the top part of the kernel stack.
>
> The routines have a nesting of 10-12 functions having 10-100 lines each.
test mail
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
Kent Stewart <[EMAIL PROTECTED]> writes:
> Dave Hayes wrote:
>>
>> Cvsup'd sources (tag=RELEASE_4_2_0) from scratch fail:
> I don't see a tag=RELEASE_4_2_0. There is a tag=RELENG_4_2_0_RELEASE.
> Could this be your problem.
No, I misreported the tag. If I had tried that, there'd probably be no
42 matches
Mail list logo