On Mon, Jun 09, 2003 at 12:19:01AM +1000, Andrew wrote:
Hi,
I'm just having a look at ugen, trying to see if I can get any action out
of a USB-serial converter that has no existing driver. This is my first
foray into the USB world so I apologise for any stupid questions...is
there a good
On Wed, Jun 04, 2003 at 10:44:53PM -0700, Brian O'Shea wrote:
System panics after PQI Travel Flash (USB Compact Flash reader/writer mass
storage device) is plugged in.
This is 5.0-RELEASE on i386.
Many things have been changed since 5.0.
Please retry with 5.1-RC1 or wait the few days for
On Thu, Jun 05, 2003 at 03:32:54PM +0200, Poul-Henning Kamp wrote:
In message [EMAIL PROTECTED], Bernd Walter writes:
On Wed, Jun 04, 2003 at 10:44:53PM -0700, Brian O'Shea wrote:
System panics after PQI Travel Flash (USB Compact Flash reader/writer mass
storage device) is plugged
On Thu, Jun 05, 2003 at 04:10:59PM +0200, Poul-Henning Kamp wrote:
In message [EMAIL PROTECTED], Bernd Walter writes:
Mine works fine without quirks:
port 3 addr 3: full speed, power 100 mA, config 1, Travel Flash(0x1307),
PQI(0x0483), rev 2.05
Mine is:
port 1 addr 2: full speed
On Fri, Mar 28, 2003 at 10:38:58AM -0800, Bill Paul wrote:
So. I picked up a Linksys USB200M USB 2.0 ethernet adapter that uses
the ASIX Electronics AX88172 chip, and I started cobbling together a
driver. This chip uses a series of vendor specific commands to do
things like read/write the
On Fri, Mar 28, 2003 at 11:16:55AM -0800, Maksim Yevmenkin wrote:
Just FYI
ng_ubt(4) (/sys/netgraph/bluetooth/drivers/ubt) driver
(Bluetooth USB devices) makes use of two interfaces.
From a look into the driver these interfaces serve different
protocols.
I asume they are unrelated from a
On Fri, Mar 28, 2003 at 12:54:46PM -0800, Bill Paul wrote:
On Fri, Mar 28, 2003 at 11:16:55AM -0800, Maksim Yevmenkin wrote:
Just FYI
ng_ubt(4) (/sys/netgraph/bluetooth/drivers/ubt) driver
(Bluetooth USB devices) makes use of two interfaces.
From a look into the driver these
On Fri, Mar 07, 2003 at 11:51:45AM +0300, denb wrote:
This working in FreeBSD4.7(ipfw1), but broken in FreeBSD 5.0(ipfw2).
Why?
This is an issue triggered by compiling libalias with -O2.
Recompile libalias without -O2 and recompile natd so it binds to the
rebuild libalias.a
The problem wasn't
On Sun, Aug 25, 2002 at 11:36:15PM -0600, John Nielsen wrote:
Are there plans to add USB support for HP's newer printers to FreeBSD?
Specificially, the OfficeJets and the LaserJet 1200? They use a
new/different/broken USB interface so they're just recognized as ugen
devices at the
On Tue, Nov 12, 2002 at 06:59:14PM +0300, Anton Vinokurov wrote:
My motherboard (VIA Epia) support booting from USB-FDD, USB-ZIP, USB-HDD and
USB-CDROM. I have no idea how it works and what the difference between all
this methods. My USB flash device could be formatted as bootable under
On Tue, Nov 12, 2002 at 06:10:08PM +0300, Anton Vinokurov wrote:
Hi!
Is there any way to boot FreeBSD from USB flash device which can be detected
as 'usb zip' by BIOS?
I have EasyDisk 32M flash device, which can be formatted under Windows as
bootable, and my motherboard could boot Windows
On Thu, Nov 07, 2002 at 02:05:13PM -0800, Terry Lambert wrote:
Lukas Ertl wrote:
how hard would it be to implement resizing of mounted filesystems?
Currently, growfs requires the filesystem to be unmounted, and this is
definitely a showstopper for FreeBSD when it comes to production use.
On Thu, Oct 31, 2002 at 04:12:36PM -0500, John Fieber wrote:
I'm a bit stumped on this. I have a roughly 1.3 terabyte disk array
attached via an Adaptec 39166 controller (on the motherboard of a Dell
2650). I understand there is a gap between the theoretical filesystem
size limits and the
On Mon, Oct 28, 2002 at 08:56:35AM -0500, Joe Sunday wrote:
On Sun, Oct 27, 2002 at 09:12:33AM -0800, David Nicholas Kayal wrote:
I'm looking for a 5 volt signal.
I have wires plugged into pins 2 and 25 of the parallel port.
I have written a small program:
#include stdio.h
On Tue, Oct 08, 2002 at 09:18:21AM +, Riaal Domingues wrote:
I have a strange problem and I hope you guys can help me.
We have several 4.6-RELEASE boxes running SSH, after connected for a
while (varies between 5 min. and an +-40) the connection dies. The SSH
on the server only writes
On Tue, Aug 13, 2002 at 01:15:56PM +0200, Martin Blapp wrote:
Hi,
We noted that named-xfer does not work in STABLE and CURRENT.
Named does look for it in /usr/local/libexec than in /usr/libexec.
But named-xfer gets installed into /usr/libexec.
I guess the paths are just plain wrong
On Wed, Jul 31, 2002 at 07:17:08PM +0200, Daniel Lundqvist wrote:
On Wed, Jul 31, 2002 at 05:49:14PM +0100, David Malone wrote:
On Wed, Jul 31, 2002 at 06:30:57PM +0200, Daniel Lundqvist wrote:
If anyone has a better solution to this I'm all ears.
Couldn't you do all this in userland
On Thu, Jul 18, 2002 at 04:26:22PM +0200, Jeremy D'Hoinne wrote:
Hi,
I have a problem with many server daemons.
select() might block for a long time if system date changes.
-
Example :
at 10h00am
I call select() with a timeout argument set to 2min,
at 10h01am, time changes
On Fri, Jul 12, 2002 at 10:23:35PM +0100, void wrote:
On Wed, Jul 10, 2002 at 02:30:19PM +0200, Bogdan TARU wrote:
Hi guys,
I have just rebooted my machine, and immediately after boot I have run
'sysctl -a' as an usual user. Well, in 'kern.msgbuf' I have found the
whole
On Wed, Jul 10, 2002 at 09:13:18PM -0700, bruno schwander wrote:
I making a port (not much really) of Irit
(http://www.cs.technion.ac.il/~irit/) a modelling environment.
I am having some problems with terminal handling, so all termios guru out
there, please help ! :-)
That's what I did for
On Mon, Jul 08, 2002 at 02:53:20PM -0700, Julian Elischer wrote:
On Mon, 8 Jul 2002, Terry Lambert wrote:
Julian got struck by lightning; perhaps he will now stick to disks
with built-in lightning rods (e.g. not succeptible to this failure),
e.g. SCSI.
This is an urban
On Mon, Jul 08, 2002 at 04:40:04PM -0700, Matthew Dillon wrote:
: Julian got struck by lightning; perhaps he will now stick to disks
: with built-in lightning rods (e.g. not succeptible to this failure),
: e.g. SCSI.
:
: This is an urban ledgend..
:
:No - it's SCSI Specs.
:A SCSI
If I run the following programm:
#include sys/mtio.h
#include fcntl.h
int
Tape_rewind(int fd) {
struct mtop mo;
mo.mt_op = MTREW;
mo.mt_count = 0;
if (ioctl(fd, MTIOCTOP, mo) == -1) {
return 1;
}
return 0;
};
int
Tape_fsf(int fd,
On Sat, Jul 06, 2002 at 02:37:02PM -0700, Darren Pilgrim wrote:
Bernd Walter wrote:
On Fri, Jul 05, 2002 at 05:58:15PM -0700, Darren Pilgrim wrote:
If RAM + swap can be more than 4GB, how does FreeBSD address swap on a
32-bit machine? Does the kernel internally use a wider address space
On Sat, Jul 06, 2002 at 03:43:00PM -0700, Darren Pilgrim wrote:
Bernd Walter wrote:
On Sat, Jul 06, 2002 at 02:37:02PM -0700, Darren Pilgrim wrote:
Bernd Walter wrote:
On Fri, Jul 05, 2002 at 05:58:15PM -0700, Darren Pilgrim wrote:
If RAM + swap can be more than 4GB, how does
On Sat, Jul 06, 2002 at 04:01:18PM -0700, Terry Lambert wrote:
Darren Pilgrim wrote:
I thought the limit for filesystems was 2TB?
The Blocknumber is signed that gives:
2^31 * 512Bytes
Why sign the blocknumber? LBA uses an unsigned 32-bit integer,
allowing 2TB, and IIRC SCSI
On Sat, Jul 06, 2002 at 04:42:22PM -0700, Matthew Dillon wrote:
Negative block numbers are used by UFS to represent the indirect blocks
associated with a file, while positive block numbers represent the
contents of the file.
I never saw any negative block numbers in on-disc
On Sun, Jul 07, 2002 at 02:10:19AM +0200, Bernd Walter wrote:
On Sat, Jul 06, 2002 at 04:42:22PM -0700, Matthew Dillon wrote:
Negative block numbers are used by UFS to represent the indirect blocks
associated with a file, while positive block numbers represent the
contents
On Sat, Jul 06, 2002 at 05:33:50PM -0700, Matthew Dillon wrote:
:
:On Sat, Jul 06, 2002 at 04:42:22PM -0700, Matthew Dillon wrote:
: Negative block numbers are used by UFS to represent the indirect blocks
: associated with a file, while positive block numbers represent the
:
On Fri, Jul 05, 2002 at 05:58:15PM -0700, Darren Pilgrim wrote:
If RAM + swap can be more than 4GB, how does FreeBSD address swap on a
32-bit machine? Does the kernel internally use a wider address space
The same way it does on every partitition: using block numbers.
That way you can address
On Fri, Jun 21, 2002 at 02:29:30AM -0400, Joshua Lee wrote:
On Thu, 20 Jun 2002 19:59:20 -0700
Terry Lambert [EMAIL PROTECTED] wrote:
Patrick Thomas wrote:
Is it possible to patch/recompile FreeBSD 4.5 in such a way that your
system is no longer vulnerable to the chunking attack, even
On Mon, May 20, 2002 at 10:51:54AM -0500, Damon Anton Permezel wrote:
So, in violation of the networking be liberal in what you accept and
conservative in what you produce, sendmail in it's new form will have many
perplexed sysadmins spending lots of time tracking down these mysterious
On Mon, May 20, 2002 at 01:54:28PM -0500, Damon Anton Permezel wrote:
On Mon, May 20, 2002 at 08:40:11PM +0200, Bernd Walter wrote:
On Mon, May 20, 2002 at 10:51:54AM -0500, Damon Anton Permezel wrote:
So, in violation of the networking be liberal in what you accept and
conservative
On Thu, May 16, 2002 at 06:03:22PM -0700, Albert Kinderman wrote:
Disclaimer: I am not a programmer!
I am trying to compile scribus-0.7.2, a Page Layout program, built
against qt3. /usr/ports/print/scribus contains scribus-0.5, which
is the qt2 version.
On my Debian GNU/Linux, make
On Sat, May 11, 2002 at 03:53:31PM -0700, Peter Haight wrote:
Recently mozilla has been really slow resolving some DNS queries. I tracked
this down to a call to gethostbyname2. For some addresses (e.g.
'www.vanguard.com'), gethostbyname2 with AF_INET6 will fail and takes more
than a minute.
On Wed, Apr 17, 2002 at 09:11:28PM +0200, Peter J. Blok wrote:
Hi All,
I'd like to accomplish the following: I have two locations, connected via an
IPSEC tunnel. Is it possible to connect the vlans at both ends through the
tunnel.
Is this possible with existing software? What would it
On Wed, Apr 10, 2002 at 10:45:25AM +0200, Bogdan TARU wrote:
Dear Rogier Terry,
I didn't say the behaviour contradicts Posix.2. I just said that Posix.2
specifies removal of the trailing slashes when doing directory operation.
Which, for example, freebsd 'rm' does not, which leads
On Fri, Apr 05, 2002 at 07:56:53PM +0600, Ilia Chipitsine wrote:
Dear Sirs,
Perl has very useful split function, it splits a string according
arbitrary regular expression. Is there's such a C function ?
I'm moving few programs from Perl to C.
strsep(3)
Especially the exmaple in the manpage
On Fri, Apr 05, 2002 at 02:36:41PM -0500, Jason Borkowsky wrote:
I have a FreeBSD 4.5-RELEASE box that I recently installed gcc-3.0.4. Is
there any support for compiling 64-bit source code on this 32-bit set-up?
(ie, a sort of emulation mode in that if the compiler sees a long long
int, it
On Mon, Jan 28, 2002 at 09:49:59AM -0500, Jason Andresen wrote:
I'm hoping there is an easy answer to this one...
Is there some way vinum can be tickled such that it writes to all disks
in a plex at once? For instance, say I have a 6 disk RAID5 array
that I'm writing a 200MB file to. Is
On Thu, Jan 03, 2002 at 02:02:09PM +0100, Oliver Fromme wrote:
Jos Backus [EMAIL PROTECTED] wrote:
- Forwarded message from Justin Erenkrantz [EMAIL PROTECTED] -
+1. =) I've talked to the FreeBSD people and they just laugh
maniacally when I ask for a truss that follows
On Fri, Dec 21, 2001 at 04:54:43AM -0800, Hiten Pandya wrote:
hi all,
I wanted to ask, how I could mirror the gnats database
to my own system. I have cvsup.
/usr/share/examples/cvsup/gnats-supfile
--
B.Walter COSMO-Project http://www.cosmo-project.de
[EMAIL PROTECTED]
How can I add initalisation code to a library without needing to
call a function in the using application?
What I saw is that libc does something like this but havn't found
the starting point of this.
--
B.Walter COSMO-Project http://www.cosmo-project.de
[EMAIL PROTECTED]
On Wed, Dec 19, 2001 at 08:06:20PM +0100, Maxime Henrion wrote:
Bernd Walter wrote:
How can I add initalisation code to a library without needing to
call a function in the using application?
What I saw is that libc does something like this but havn't found
the starting point
On Wed, Dec 12, 2001 at 03:02:19AM -0800, Terry Lambert wrote:
How is setting a local register when an interrupt is triggered
antithetical to such cards working? I know of several network
cards where I've personally hacked on the driver that have such
a register.
It's not possbile to take
On Mon, Dec 10, 2001 at 09:38:22PM +0200, Danny Braniss wrote:
Er, you don't seem to understand how PCI interrupts work.
to Er is human, to ... :-)
The meteor driver was causing problems with the adpatec, so i thought
if i could reasigne the irq it would help. anyway i think i found a
On Tue, Dec 04, 2001 at 03:35:38AM -0800, Crist J . Clark wrote:
On Tue, Dec 04, 2001 at 10:04:57PM +1100, Mark Hannon wrote:
Hi Chris,
This is exactly what I was seeing! (I finally twigged when I did a
low level backup of a filesystem and then noticed that my level 9
backup was
On Mon, Dec 03, 2001 at 10:24:36AM -0800, Lars Eggert wrote:
Hi,
is anyone working on extending umass.c for ATAPI devices?
My new digital camera identifies itself as an ATAPI device, but the
corresponding code is commented out in umass.c, because it isn't
complete and/or tested. (I'm
On Mon, Dec 03, 2001 at 12:43:19PM -0800, Lars Eggert wrote:
Bernd Walter wrote:
src/sys/cam/scsi/scsi_da.c has the quirk table for such things.
There are also some cameras in there.
Ian Dowse has suggested the same thing, I'll try the quirks. There's
also a patch at http
On Mon, Dec 03, 2001 at 03:19:03PM -0800, Lars Eggert wrote:
Bernd Walter wrote:
But from memory it sounds like a new device for the quirk table.
Yes, adding quirks to scsi_da.c and enabling ATAPI in umass.c made the
camera attach and mount correctly. Copying also works fine. Patches
On Fri, Nov 30, 2001 at 11:11:56AM +0100, Pierre Beyssac wrote:
On Thu, Nov 29, 2001 at 10:28:09PM -0500, Leo Bicknell wrote:
4000 km one way == 8000 km two way, 8000 / 168300 = 47ms in my book,
theoretial optimum.
With an RTT of 47ms, you can move 16k per RTT, or or about 340k/sec.
On Wed, Nov 21, 2001 at 12:03:04PM -, Matthew wrote:
Thank you for the help.
But i need the boot.config to have the -P/-H flag in there. Can i put in
some other place?
You can also switch to serial via /boot/loader.rc.
I have -h and -D in /boot.config so boot1 is using a serial.
These
On Wed, Oct 31, 2001 at 03:02:59PM -0600, Nicpon, John wrote:
Please specifically define where data goes that is sent to /dev/null
That's what manpages are for - see null(4).
If you want it more specific src/sys/dev/null.c says:
[...]
static int
null_write(dev_t dev, struct uio *uio, int
On Thu, Nov 01, 2001 at 08:29:39PM +, lg wrote:
In short: The data is tranfered into the kernel and dropped there.
my source /usr/src/sys/i386/i386/mem.c [FreeBSD-4.3-RELEASE]
says that data doesnt transfered into kernel.
I was looking into -current.
Null and *random have been seprarated
On Sun, Oct 28, 2001 at 11:47:16AM -0800, David Kirchner wrote:
Hi,
Is there currently a way (sysctl, patch?) to disable dynamic route
I asume your dynamic routes are simple redirects.
sysctl -w net.inet.icmp.drop_redirect=1
or in /etc/rc.conf:
icmp_drop_redirect=YES
Or get a better routing
On Sun, Oct 28, 2001 at 04:01:00PM -0500, Jon Parise wrote:
On Sun, Oct 28, 2001 at 12:39:34PM -0800, Seth Kingsley wrote:
Can anyone suggest a means by which to capture the 'boot -v'
output without using a serial console?
dmesg(8), so long as it doesn't overrun the buffer.
On Thu, Oct 04, 2001 at 05:32:16PM -0600, Thierry Black wrote:
Your chances to get an answer would be increased if you would write
html.
--
B.Walter COSMO-Project http://www.cosmo-project.de
[EMAIL PROTECTED] Usergroup [EMAIL PROTECTED]
To Unsubscribe:
On Sun, Sep 30, 2001 at 10:18:01AM -0500, Bart Kus wrote:
On a totally unrelated subject to my sio.c message, I have a second problem.
I've built a computer-controlled drill, that is controlled via the parallel
port. This drill uses stepper motors, at 1/2 step. My driver software
On Sun, Sep 30, 2001 at 01:10:35PM -0500, Bart Kus wrote:
On Sunday 30 September 2001 11:03, Bernd Walter wrote:
Controlling steppers via lpt is what I explained and showed last
tuesday on the cosmo-project meeting.
We used nanosleep() which worked fine for the demonstration and
playing
On Sat, Sep 29, 2001 at 10:47:54AM -0400, [EMAIL PROTECTED] wrote:
Well if you didnt snip out the context you wouldnt have an argument at all,
since I said to make it an option to shut down or issue a warning.
You mean this:
sysctl machdep.panic_on_nmi
But I still beleave it's not a good
On Fri, Sep 28, 2001 at 09:55:03AM -0700, rick norman wrote:
When an app binds an address and port to a listen socket, what
variables
can I adjust so the address may be reused immediately after the app
exits.
My understanding was that
int on = 1;
On Fri, Sep 28, 2001 at 07:03:51PM +0530, Anjali Kulkarni wrote:
hi,
Does anyone know whether it is advisable or not to use setjmp/longjmp within kernel
code? I could not see any setjmp/longjmp in kernel source code. Is there a good
reason for this or can it be used?
You need to look again,
On Fri, Sep 28, 2001 at 09:46:19AM -0400, [EMAIL PROTECTED] wrote:
In a message dated 9/25/01 1:05:21 PM Eastern Daylight Time, [EMAIL PROTECTED]
writes:
Well, at least we take the machine down, which is a heck of a lot
better than ignoring the problem, which is really all that I was
On Mon, Sep 24, 2001 at 06:14:34PM -0700, Bakul Shah wrote:
FWIW, in a Unix port we did I remember putting the user
struct *above* the kernel stack. The stack grew down so you
hit the red zone (the guard pages) without clobbering the
user struct. Since struct user _ended_ on a page
On Tue, Sep 25, 2001 at 10:01:03AM +0200, Peter Wullinger wrote:
On Tue, Sep 25, 2001 at 09:56:07AM +0200, Bernd Walter wrote:
On Mon, Sep 24, 2001 at 06:14:34PM -0700, Bakul Shah wrote:
FWIW, in a Unix port we did I remember putting the user
struct *above* the kernel stack. The stack
On Mon, Sep 17, 2001 at 05:15:07PM -0700, Julian Elischer wrote:
Ok so I have to ask... what is CAN bus? (besides a piece of string
between 2 cans.).
CAN stands for Controller Area Network.
It's a fieldbus widely used in automation systems.
--
B.Walter COSMO-Project
On Sat, Sep 15, 2001 at 11:29:41AM -0700, Matthew Jacob wrote:
Don- too bad- I'm over in NAS in building N-258 and just took down the h/w
where we could test this (Alpha 4100 with 8 Qlogic cards 8 150GB MegaDrive
RAID arrays)- We're excessing this equipment because the mass storage group's
On Sat, Sep 15, 2001 at 04:34:32PM -0700, [EMAIL PROTECTED] wrote:
On Sat, 15 Sep 2001 21:52:06 +0200, Bernd Walter wrote:
On Sat, Sep 15, 2001 at 12:26:10PM -0700, [EMAIL PROTECTED]
wrote:
I posted a message to -hackers several days ago, complete with a kernel
backtrace
On Wed, Sep 05, 2001 at 01:10:27PM +0200, Alexander Langer wrote:
Thus spake Kris Kennaway ([EMAIL PROTECTED]):
On Wed, Sep 05, 2001 at 09:52:34AM +0300, Giorgos Keramidas wrote:
I have it fixed now in my local CVS tree. Hopefully Kris will commit
something to fix it soon :-)
On Wed, Sep 05, 2001 at 09:07:19PM +0800, Igor Podlesny wrote:
My greetings!
I noticed that some mailers (sendmail, postfix) in case they allow
relayingforsomedomain.zonealsoallowrelayingfor
subdomain-of.somedomain.zone.
I can accept this as reasonable
On Thu, Aug 30, 2001 at 07:42:24PM +0530, Sridhar M wrote:
fxp0 : ip : 10.1.6.160/24
fxp1: ip 10.1.6.161/24
default gateway : ip : 10.1.6.1
gateway and routed was enabled .
routed is for dynamic routing (RIP).
You don't need it if you are doing static routing.
our setup is freebsd system
On Sun, Aug 26, 2001 at 07:33:25PM +0100, Robert Swindells wrote:
Would it be possible to state somewhere - maybe on the web site, the policy
for allowing posts to the mailing list ?
I'm getting a bit fed up of my posts getting bounced because the MTA
for freebsd.org doesn't like my
I do the following:
buf = (char*)mmap(NULL, BUFSIZE, PROT_READ | PROT_WRITE,
MAP_ANON | MAP_INHERIT | MAP_SHARED, -1, 0);
Now I vfork/execve a child.
But the child can't access the mmaped memory.
It was my understanding that MAP_INHERIT | MAP_SHARED keep the memory
over the
MAP_SHARED alone is suffient for fork!?
On Thu, 23 Aug 2001, Alfred Perlstein wrote:
* Bernd Walter [EMAIL PROTECTED] [010823 06:16] wrote:
I do the following:
buf = (char*)mmap(NULL, BUFSIZE, PROT_READ | PROT_WRITE,
MAP_ANON | MAP_INHERIT | MAP_SHARED, -1, 0);
Now I
On Tue, Aug 21, 2001 at 09:41:34PM +0200, Andre Oppermann wrote:
# dd if=/dev/zero of=mfsroot bs=1k count=25000
# vnconfig -e -s labels vn0 mfsroot
# disklabel -r -w vn0 auto
# newfs /dev/vn0c
# mount and cp blabla
You need to disklabel -B vn0 to install boot blocks.
And you should not
On Sun, Aug 19, 2001 at 04:51:24PM -0400, Jan Knepper wrote:
Hi!
Does anyone here know what to do about this?
Read the manpage for the xl driver:
xl%d: no memory for rx list The driver failed to allocate an mbuf for
the receiver ring.
Increase the nmbclusters or decrease the mbuf
Is it possible to indicate or better sigbus alignment errors on i386?
--
B.Walter COSMO-Project http://www.cosmo-project.de
[EMAIL PROTECTED] Usergroup [EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-hackers in
On Sun, Aug 12, 2001 at 11:46:57AM -0700, Terry Lambert wrote:
Bernd Walter wrote:
Another point:
Can we '#define MTEOM MTEOD' as MTEOM is used on NetBSD and Solaris?
End of Message is not the same as End of Data for some
drives; this could break old 8-track (no, not the music
On Sun, Aug 12, 2001 at 06:03:00PM -0700, Matthew Jacob wrote:
I'll answer based upon -stable FreeBSD code.
On Sun, 12 Aug 2001, Bernd Walter wrote:
Asume the following code examples:
int fd;
struct mtop mo;
char buf[10240];
fd = open(/dev/nsa0, O_RDWR | O_EXLOCK
On Mon, Aug 06, 2001 at 01:12:11PM -0700, Julian Elischer wrote:
if you can write a little sample code I'll put it in the sample driver.
Isn't it already in /usr/share/examples/kld?
E.g /usr/share/examples/kld/cdev/module/cdevmod.c
--
B.Walter COSMO-Project
On Sat, Aug 04, 2001 at 02:38:23AM -0300, Rik van Riel wrote:
On Fri, 3 Aug 2001, Terry Lambert wrote:
This is a trivial implementation. I'm not very impressed.
Personally, I'm not interested in a huge user space,
Maybe not you, but I bet the database and scientific
computing people
On Sat, Aug 04, 2001 at 02:58:34PM -0700, David O'Brien wrote:
On Fri, Aug 03, 2001 at 02:12:25PM +0200, Bernd Walter wrote:
I used a library which also needed -lstdc++.
Now that I did not need them any more I removed them and was
surprised that the resulting FreeBSD binary actually got
On Wed, Jul 25, 2001 at 08:13:34PM -0700, Soren Kristensen wrote:
Hi,
I'm trying to do some testing on my boxes with 3 ethernet interface. But
it seems like that FreeBSD gets very confused. Can somebody please tell
me what's going and, and preferable, help me out ?
I basically want to
On Thu, Jul 26, 2001 at 11:35:59AM -0400, Leo Bicknell wrote:
On Thu, Jul 26, 2001 at 10:01:05AM +0200, Bernd Walter wrote:
But there is no reason to put more than one interface on the same hub.
Simply configure one interface with alias entries.
s/hub/switch/ and there is, and the system
On Thu, Jul 26, 2001 at 01:59:13PM -0700, Arun Sharma wrote:
/**
* test_and_set_bit - Set a bit and return its old value
* @nr: Bit to set
* @addr: Address to count from
*
* This operation is atomic and cannot be reordered.
* It also implies a memory barrier.
*/
static
On Thu, Jul 26, 2001 at 02:21:06PM -0700, Arun Sharma wrote:
On Thu, Jul 26, 2001 at 11:15:40PM +0200, Bernd Walter wrote:
static __inline__ int test_and_set_bit(int nr, volatile void * addr);
-current has a lot of atomic functions in src/sys/i386/include/atomic.h.
It has byte, word
On Thu, Jul 26, 2001 at 03:11:00PM -0700, Arun Sharma wrote:
On Thu, Jul 26, 2001 at 11:59:27PM +0200, Bernd Walter wrote:
[...]
ATOMIC_ASM(set, char, orb %b2,%0, v)
ATOMIC_ASM(clear,char, andb %b2,%0, ~v)
[...]
That does set, not test-and-set. What I want is exactly what
On Mon, Jul 23, 2001 at 12:56:04AM -0700, Julian Elischer wrote:
Julian Elischer wrote:
Dima Dorfman wrote:
[...]
* A cross reference of the FreeBSD kernel
well I have the source code of course, but the second is what I'm
looking for except that it stopped being updated
On Mon, Jul 16, 2001 at 04:34:52PM -0700, Dan wrote:
ya it seems it is running into swap abit.
hmmm watching apache with truss i see alot of error #35's
in the sys callswhat is that related to again?
/usr/include/errno.h says:
#define EAGAIN 35 /* Resource
On Mon, Jul 16, 2001 at 08:40:09PM +0200, Wilko Bulte wrote:
On Mon, Jul 16, 2001 at 08:39:04PM +0200, [EMAIL PROTECTED] wrote:
You use emacs, don't you?
No, vi. My first experiences with Unix (SysV.2) were in the days that
Emacs was considered anti-social (on 8MB memory machines
On Sun, Jul 15, 2001 at 06:19:15AM -0500, Tim wrote:
Cool! We were just commenting that it's too bad dummynet/ALTQ really
couldn't help the interactive response for us dial-up users. Anyway, I
just tried this on my dial-up connection on a fresh -STABLE but don't
really notice any
On Tue, Jul 03, 2001 at 03:06:08AM -0700, Terry Lambert wrote:
Sequent had a BSD-based OS called Dynix, which had a lot
of smart things in it, including per processor resource
pools, which is what enabled it to scale so large: it
removed everything it could from the inter-CPU contention
On Fri, Jul 13, 2001 at 03:12:57PM -0400, Leo Bicknell wrote:
On Fri, Jul 13, 2001 at 12:00:04PM -0700, Terry Lambert wrote:
One good way to prevent this is to not unreasonably set
your window size... 8-p.
Ah, I see, so to prevent MBUF exhaustion I should not let
my socket buffers get
On Mon, Jul 09, 2001 at 08:54:01AM +0200, Mustafa N. Deeb wrote:
how can I tell sendmail to deny this
MAIL From: SIZE=1926
250 ... Sender ok
You shouldn't!
An empty envelope sender is used in bounced mails and blocking would
reject all error informations.
It is empty because it doesn't
On Fri, Jul 06, 2001 at 08:58:31AM +0300, Belial wrote:
I have PC with dual head video card (Matrox G450) which supports to
use both heads independently. I can attach to it two monitors or
monitor and tv. Also I can attach two mice(ps/2 and serial) and
two keyboards(ps/2 and usb).
How I
On Thu, Jul 05, 2001 at 04:51:22PM +0400, Eugene L. Vorokov wrote:
Hello,
Some time ago I was asking about I/O in kernel mode when I don't have
struct proc to use syscalls. Actually I just wanted my kld to read it's
config file on load. Terry told me it's tricky, and I was thinking
about
On Thu, Jul 05, 2001 at 02:59:17PM +0200, Bernd Walter wrote:
You are mmaping into the address space for the process you use the
struct proc from.
As long as it's this programm that is curproc everything is fine.
That means you are called from that process such in kldload or
interrupted
On Tue, Jul 03, 2001 at 04:21:14AM -0700, Terry Lambert wrote:
Michael C . Wu wrote:
On Sat, Jun 30, 2001 at 05:47:49AM +, E.B. Dreger scribbled:
| 1. Is AIO SMP-safe?
AIO is not safe, SMP or not.
Are you maybe confusion AIO (a POSIX mandated API) with
async mounts?
AIO
On Mon, Jul 02, 2001 at 11:01:42PM -0700, Mike Smith wrote:
Be aware that ftpd is likely to be replaced in the near future, as
there's a strong desire to converge on the LukeM FTP tools.
I'm surprised.
I don't see big wins - at least for ftpd.
Well the -r option looks fine but shouldn't be
On Sun, Jul 01, 2001 at 08:02:20AM +0100, [EMAIL PROTECTED] wrote:
On Sat, Jun 30, 2001 at 02:59:57PM -0700, Rich Morin wrote:
I have a luggable FireWire drive which I am considering using for
backups and data mobility on a variety of machines and operating
systems (roughly, *BSD, Mac OS
201 - 300 of 349 matches
Mail list logo