Your membership in the mailing list freebsd-hackers has been disabled
due to excessive bounces The last bounce received from you was dated
19-Oct-2013. You will not get any more messages from this list until
you re-enable your membership. You will receive 1 more reminders like
this before your
Your membership in the mailing list freebsd-hackers has been disabled
due to excessive bounces The last bounce received from you was dated
19-Oct-2013. You will not get any more messages from this list until
you re-enable your membership. You will receive 2 more reminders like
this before your
As requested earlier, I've moved the thread to freebsd-stable. -- George
___
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to freebsd-hackers-unsubscr...@freebsd.org
: FreeBSD 8.1-STABLE
partition 2: FreeBSD 7.3-STABLE
scollay:
hw.model: AMD Sempron(tm) 140 Processor
hw.physmem: 186312294
ethernet: 1000Mb/s
FreeBSD 8.1-PRERELEASE
sullivan:
hw.model: AMD Athlon(tm) 64 X2 Dual Core Processor 4800+
hw.physmem: 4279980032
ethernet 1000Mb/s
FreeBSD 7.2-RELEASE
mattapan
, but I
started seeing the problem as early as 8.0-RELEASE.-- George
___
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to freebsd-hackers-unsubscr...@freebsd.org
reported them then?
Doug
No, I did not report the problems then.-- George
___
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to freebsd-hackers
OS: FreeBSD post 8.0-RELEASE
Firefox: 3.6
Distributed.net client: v2.9103 and later
When the distributed.net application is not running, Firefox will
start up on my box in less than two seconds. But with the
distributed.net application running, the firefox startup slows down
painfully, taking
HP Compaq Presario CQ61-420US (dual core amd64)
I forgot to mention: FreeBSD 8.0-RELEASE
With an Iomega USB flash drive inserted into a USB slot at the time
hald starts, it crashes:
pid 903 (hald), uid 560: exited on signal 11
pid 943 (hald-probe-volume), uid 0: exited on signal 6 (core
___
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to freebsd-hackers-unsubscr...@freebsd.org
registers in the last 24 hrs (but whois has
all the right data)
Your registrar has not inserted the glue records for your name
servers into the root zone. Try a different registrar.
-- George Mitchell
___
freebsd-hackers@freebsd.org mailing list
http
___
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to [EMAIL PROTECTED]
and installed the bind95 port. Still very, very slow. I will
probably shift my server to a FreeBSD 7.0 system this weekend, but I
would like very much to understand what's going on.
-- George Mitchell
___
freebsd-hackers@freebsd.org mailing list
http
times, I could get an answer after 20-30 seconds. This morning I cvsup=
ped
again and installed the bind95 port. Still very, very slow. I will
probably shift my server to a FreeBSD 7.0 system this weekend, but I
would like very much to understand what's going on.
Did you configure DLV
Hi, all. I apologize for not posting a question specific to FreeBSD (I'll
study about that later), but I'm looking for some help understanding a few
things and I don't know where else to turn. Using FreeBSD to give me
concrete examples of how certain things work is okay, since I do use FreeBSD
___
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to [EMAIL PROTECTED]
___
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hello;
I started playing a bit with net/pppd23 and I noticed there are some patches
for FreeBSD-3.0 that were never committed (NetBSD certainly has them). Our
pppd(8) is derived from the samba pppd port and should have them if we want
to continue updating it.
I started adapting them but I am
Thorpe: anyway you asked for an idea :-) And I would also like to know the
end of it...
gregory
___
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to [EMAIL PROTECTED]
have verified that they persist with 4BSD also.
I can hear you.
Then again, I'm in the slow process of converting people in my office to use
FreeBSD instead of GNU/Linux: it's not going to be easy if 6.3 4BSD exhibits
slownesses when compiling a kernel, and 6.3 ULE might prove not that stable
(not related to
network traffic or bandwidth limitations).
The transition to ULE made them disappear (still occasional mouse jerkiness
though).
I suppose the enhancements/corrections of 7.x ULE won't be MFC'd ?
gregory delfly
___
freebsd-hackers
get the PCL commands, as
text...
Alas, this is not as simple as we had hoped.
Any suggestions as to how to produce the desired result would be
appreciated.
[EMAIL PROTECTED]
___
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman
rootkits, No Starch Press, might be considered
an introduction, too. Have layed my hands on it, but not my eyes yet...
gregory
___
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail
Quoting Ivan Voras [EMAIL PROTECTED]:
For general information on the FreeBSD kernel see the book Design and
implementation of the FreeBSD operating system,
Will this edition be updated, or is it still relevant with the coming of 7.0 ?
It was written with 5.0 in mind, and considerable progress
be more legitimate: using sysctl and falling back on
linuxprocfs when lacking functionality ?
(Depending on whether it's a FreeBSD *port*, or if you want to keep it as
general as you can)
Also, have you considered procstat ?
(as i read here:
http://ivoras.sharanet.org/freebsd/freebsd8.html
of myself by mistaking procfs for linprocfs: ooops,
awfully sorry :-(
___
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to [EMAIL PROTECTED]
using.
However, the new eve code chucks the following errors on FreeBSD:
err:iphlpapi:getRouteTable Received unsupported sockaddr family 0x12
err:iphlpapi:getRouteTable Unexpected address type 0x10
err:iphlpapi:getRouteTable Unexpected address type 0x20
err:ole:CoGetClassObject class {9a5ea990-3034
___
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to [EMAIL PROTECTED]
:1
type of threads, and vice versa ?
thanks,
gregory
___
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to [EMAIL PROTECTED]
.
Comparte video en la ventana de tus mensajes (y también tus fotos de
Flickr). Usa el nuevo Yahoo! Messenger versión Beta.
http://e1.beta.messenger.yahoo.com/
___
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
--- Thomas Sparrevohn [EMAIL PROTECTED] ha scritto:
...
I have Vista Home edition ruinning any FreeBSD without any problems and
without having to do anything special - That is on CURRENT
Hmm...
Installation order is important, perhaps you already had FreeBSD before
installing Vista
Thanks to all for your suggestions! As soon as I have a chance to
follow up on them (might not be for a couple of days), I'll let
you known how it came out. -- George Mitchell
___
freebsd-hackers@freebsd.org mailing list
http
Hi;
FWIW, if you just got your new computer with Windows Vista installed and were
hoping to dual boot FreeBSD on it, let me tell you that FreeBSD's bootloader
will screw things up.
Microsoft basically declared the war on alternative OSs so it seems vista
doesn't like:
- bootloaders different
?-- George Mitchell
___
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hi,
Excuse me for a long email.
I have a problem with my external USB DVD writer (model SE-S184M/EUBN).
I do not succeed in to burn DVD (only CD).
The system (FreeBSD eclypse.it 6.1-RELEASE FreeBSD 6.1-RELEASE #0: Sun May 7
04:32:43 UTC 2006
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
.
__
Do You Yahoo!?
Poco spazio e tanto spam? Yahoo! Mail ti protegge dallo spam e ti da tanto
spazio gratuito per i tuoi file e i messaggi
http://mail.yahoo.it
___
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman
.
___
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to [EMAIL PROTECTED]
to specify which should be which?
-- George Mitchell
___
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to [EMAIL PROTECTED]
___
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to [EMAIL PROTECTED]
losers like me from running into
this problem. -- George Mitchell
___
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to [EMAIL PROTECTED]
A couple of days ago, I upgraded from FreeBSD 5.3 to 6.1 (installed
on a previously unused disk partition). Happiness ensued for the
most part, but I could not get printing to work at all with the
generic kernel.
I played around for a while and eventually found that
open (/dev/lpt0 ...) would
___
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to [EMAIL PROTECTED]
PROTECTED] MSN . [EMAIL PROTECTED]
Yahoo . yscrappy Skype: hub.orgICQ . 7615664
___
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any
in tempo reale!
http://it.yahoo.com/mail_it/foot/*http://it.messenger.yahoo.com
___
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to [EMAIL PROTECTED]
, otherwise we wouldn't be on a FreeBSD list. Having avoided
that trap in the choice of platform, doesn't it behoove us to avoid it
elswhere?
Is someone still using SPIN/modula?? ;-).
If it were easy to replace C++ with C + kobj() than I'd say... leave things as
they are. But if it's not difficult
FWIW and just IMHO;
I think it would be really nice to have the IOKit, or a lookalike that uses
kobj(), available on FreeBSD. Another interesting experiment that I've
mentioned before is OpenBFS:
http://www.bug-br.org.br/openbfs/index.phtml?section=development
OpenBFS, as all file systems under
--- Giorgos Keramidas [EMAIL PROTECTED] ha scritto:
...
It may still be worth trying. I only started looking at `umem' from
sourceforge this week, but if there is more interest in ptmalloc,
maybe it is better if I focused on why ptmalloc fails to work on
FreeBSD.
FWIW, I just submitted
--- Eric Anderson [EMAIL PROTECTED] ha scritto:
...
ZFS surely is cool, but I'm not sure how much it benefits FreeBSD
compared to something like journaling, or adding features to our
existing filesystem, or even write support for one of the already ported
read-only filesystems we
...
Well ... one thing we can't underestimate is that SUN would actually like a
port (noticed all the good PR for them Dtrace for FreeBSD has brought?) and is
willing to cooperate: not coding but at least saying what to do, explaining the
code, etc. Reiser doesn't care and SGI is clearly busy with other
___
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hello;
--- Michael Vince [EMAIL PROTECTED] ha scritto:
snip (I forgot to mention Apple is interested in it too)
Since this is a project that would benefit just about anyone using
FreeBSD, it would be good to see a project like this get funding or do a
fund raise.
As a summer of code
Hello;
DragonFly and NetBSD are interested, I'm sure there's interest in FreeBSD too,
but AFAICT no one has started.
Here is an interesting link:
http://www.opensolaris.org/os/community/zfs/porting/
cheers,
Pedro.
---
Pedro F. Giffuni
M. Sc. Industrial Eng. University of Pittsburgh
___
Yahoo! Mail: gratis 1GB per i messaggi e allegati da 10MB
http://mail.yahoo.it
___
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe
.
___
Yahoo! Mail: gratis 1GB per i messaggi e allegati da 10MB
http://mail.yahoo.it
___
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to [EMAIL
___
Yahoo! Mail: gratis 1GB per i messaggi e allegati da 10MB
http://mail.yahoo.it
___
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hi,
I am one of the firmware guys that is writing a Secondary Boot Loader that
boots FreeBSD kernel. From what I see in the ELF header for FreeBSD kernel, the
load address seems to have a value of 0x8020 which seems to be a Virtual
address for me. If I want to put the Physical
: 209715200
hw.machine: i386
hw.model: Intel(R) Xeon(TM) CPU 2.40GHz
hw.ncpu: 2
hw.byteorder: 1234
hw.physmem: 2142654464
hw.usermem: 1622208512
hw.pagesize: 4096
can you tell me how can process allocate more then 1gb memory
thanks in advance
___
freebsd
: 209715200
hw.machine: i386
hw.model: Intel(R) Xeon(TM) CPU 2.40GHz
hw.ncpu: 2
hw.byteorder: 1234
hw.physmem: 2142654464
hw.usermem: 1622208512
hw.pagesize: 4096
can you tell me how can process allocate more then 1gb memory
thanks in advance
___
freebsd
to comment on
your dream.
Please accept my apologies.
Chris McDermott
On Thu, 2 Dec 2004 10:21:28 -0800 (PST), freeBsd
Romeo
[EMAIL PROTECTED] wrote:
thanks sir,
Mr Chris McDerMott has written a great parody,
worth
candidate for freebsd funnies ...i am happy if I
was
his inspiration
thanks sir,
Mr Chris McDerMott has written a great parody, worth
candidate for freebsd funnies ...i am happy if I was
his inspiration :-)..I think now freebsd is more
suitable for stable production system I have
decided to align myself to Redhat Stateless linux
project(http
Hello Sirs,
First thank you all for making such an
beautiful, robust and elegant OS. I have a dreamto
make worlds best free bsd based desktop system in the
world .but why do I want that (freebsd does great
on servers ...and why do we need this ?) ..Bcos
billions of people who
/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to [EMAIL PROTECTED]
disabling HTT completely instead, as I don't think the sysctl
does that.
--
Michael King
Systems Administrator
Web International, Inc.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any
about Postfix, and my impression is it has a
license
that won't leave you down a dead-end road like qmail's does.
Dave Hart
[EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to [EMAIL PROTECTED]
-Spock
- In dieser Mail ist ein Geist, der Dich in den Hintern beisst -
Daniel Lang * [EMAIL PROTECTED] * +49 89 289 18532 * http://www.leo.org/~dl/
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
Hello all. I have FreeBSD 5.1 installed from the distribution CD's from FreeBSD.org.
I also have a linksys USB200M usb ethernet device that doesn't seem to want to
cooporate. It looks from the dmesg that it is almost working. I was just wondering
if there is a fix for this yet ? School
I have a laptop (i-buddy) that I have put FreeBSD on. Everything works great except
for the NIC. I think the problem is that freebsd does not have any support for this
sis card because it is too new. Anyone know what to do ? I have included the
description of the NIC from the web site
Thank you very much for your problem report.
It has the internal identification `ports/45108'.
The individual assigned to look at your
report is: freebsd-ports.
You can access the state of your problem report at any time
via this link:
http://www.freebsd.org/cgi/query-pr.cgi?pr=45108
Category
Thank you very much for your problem report.
It has the internal identification `ports/45113'.
The individual assigned to look at your
report is: freebsd-ports.
You can access the state of your problem report at any time
via this link:
http://www.freebsd.org/cgi/query-pr.cgi?pr=45113
Category
Thank you very much for your problem report.
It has the internal identification `ports/45111'.
The individual assigned to look at your
report is: freebsd-ports.
You can access the state of your problem report at any time
via this link:
http://www.freebsd.org/cgi/query-pr.cgi?pr=45111
Category
Thank you very much for your problem report.
It has the internal identification `ports/45114'.
The individual assigned to look at your
report is: freebsd-ports.
You can access the state of your problem report at any time
via this link:
http://www.freebsd.org/cgi/query-pr.cgi?pr=45114
Category
Thank you very much for your problem report.
It has the internal identification `ports/45116'.
The individual assigned to look at your
report is: freebsd-ports.
You can access the state of your problem report at any time
via this link:
http://www.freebsd.org/cgi/query-pr.cgi?pr=45116
Category
Thank you very much for your problem report.
It has the internal identification `ports/45107'.
The individual assigned to look at your
report is: freebsd-ports.
You can access the state of your problem report at any time
via this link:
http://www.freebsd.org/cgi/query-pr.cgi?pr=45107
Category
Thank you very much for your problem report.
It has the internal identification `ports/45118'.
The individual assigned to look at your
report is: freebsd-ports.
You can access the state of your problem report at any time
via this link:
http://www.freebsd.org/cgi/query-pr.cgi?pr=45118
Category
Thank you very much for your problem report.
It has the internal identification `ports/45115'.
The individual assigned to look at your
report is: freebsd-ports.
You can access the state of your problem report at any time
via this link:
http://www.freebsd.org/cgi/query-pr.cgi?pr=45115
Category
Thank you very much for your problem report.
It has the internal identification `ports/45112'.
The individual assigned to look at your
report is: freebsd-ports.
You can access the state of your problem report at any time
via this link:
http://www.freebsd.org/cgi/query-pr.cgi?pr=45112
Category
Thank you very much for your problem report.
It has the internal identification `ports/45110'.
The individual assigned to look at your
report is: freebsd-ports.
You can access the state of your problem report at any time
via this link:
http://www.freebsd.org/cgi/query-pr.cgi?pr=45110
Category
Thank you very much for your problem report.
It has the internal identification `ports/45109'.
The individual assigned to look at your
report is: freebsd-ports.
You can access the state of your problem report at any time
via this link:
http://www.freebsd.org/cgi/query-pr.cgi?pr=45109
Category
Thank you very much for your problem report.
It has the internal identification `ports/45119'.
The individual assigned to look at your
report is: freebsd-ports.
You can access the state of your problem report at any time
via this link:
http://www.freebsd.org/cgi/query-pr.cgi?pr=45119
Category
, 06 Jun 2002 17:20:01 -0700
From: Lars Eggert [EMAIL PROTECTED]
User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.0rc3) Gecko/20020528
X-Accept-Language: en-us, de-de
MIME-Version: 1.0
To: John Baldwin [EMAIL PROTECTED]
Cc: Trish Lynch [EMAIL PROTECTED], [EMAIL PROTECTED]
Subject: Re
Dear freebsd-hackers ,
Çѹ¹Õé ¤Ø³ÃÙéÊÖ¡ÇèÒà§Ô¹à´×͹·Õè¤Ø³ä´éÃѺäÁè¤ØéÁ¤èҡѺ¤ÇÒÁÊÒÁÒö¢Í§¤Ø³
Çѹ¹Õé ¤Ø³ÃÙéÊÖ¡ÇèÒà¾×è͹ÃèÇÁ§Ò¹¡éÒÇ˹éÒ ã¹¢³Ð·Õè¤Ø³ÍÂÙè·Õèà´ÔÁ ·Ñé§ æ·Õè
¤Ø³ÁÕ¤ÇÒÁÊÒÁÒö¡ÇèÒ
Çѹ¹Õé ¤Ø³ÃÙéÊÖ¡à˹×èÍ¡Ѻ¡Ò÷ӧҹ áÅéÇÁͧËÒ˹·Ò§·Õè´Õ¡ÇèÒã¹Í¹Ò¤µ
ÇÑ
Dear freebsd-hackers ,
ËÒ¡¤Ø³ÅéÁàËÅÇ·Õè¨ÐÇҧἹ ÂèÍÁá»ÅÇèҤسÇҧἹ·Õè¨ÐÅéÁàËÅÇ
ËÒ¡¤Ø³ ¤×ͤ¹Ë¹Ö觷Õèà¤ÂÇҧἹ͹Ҥµ¢Í§¤Ø³
µéͧ¡Ò÷Õè¨Ð»ÃÐʺ¤ÇÒÁÊÓàÃç¨ã¹ªÕÇÔµ
µéͧ¡Ò÷Õè¨Ð»ÃÐʺ¤ÇÒÁÊÓàÃç¨ã¹ã¹Ë¹éÒ·Õè¡Òçҹ
µéͧ¡Ò÷Õè¨ÐÁÕ¤Ãͺ¤ÃÑÇ·ÕèͺÍØè¹
µéͧ¡ÒÃÁÕÍÔÊÃÐÀÒ¾·Ò§´éÒ¹¡ÒÃà
) it produces a file less than 1kB. So I
assemble it to find the diffenece.
on FreeBSD:
.globl aa
.data
.p2align 5
.typeaa,@object
.sizeaa,10485760
aa:
.zero 10485760
but on Linux:
.globl aa
.bss
.align 32
.typeaa,@object
Hello,
I've added you to my freebsd-lists-for-dayan-only group at eGroups, a free,
easy-to-use email group service. As a member of this group, you
may send messages to the entire group using just one email address:
[EMAIL PROTECTED] eGroups also makes it easy to
store photos and files
On Tue, Jul 10, 2001 at 09:49:18AM -0400, Bill Moran wrote:
Now, I've never used partition magic, but I (personally) find the
FreeBSD
partition program in sysinstall to be the easiest one I've ever used.
What should be changed to make it easier?
Maybe not easier but better:
+ Allow one
there
is any benefit from following them (nad it would be
sys/arch/${MACHINE_ARCH}/compile anyway).
--
-- David ([EMAIL PROTECTED])
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-hackers in the body of the message
mail to [EMAIL PROTECTED]
with unsubscribe freebsd-hackers in the body of the message
FreeBSD boot scripts and turned them into modules so as to make it
very similar to the current system.
What about adding the typical test foo logic to the NetBSD files to
handle both OS's?
I did make one change that I
think will be helpful, I moved pccard initialization to before the
mounting
of this on FreeBSD.org someplace).
In short, these are the reasons I prefer FreeBSD:
1) The file system is so much better than any Linux file system,
ReiserFS included.
Question: Is UFS a balanced btree? I don't think so, but I
could be wrong. In either case, UFS is by far and away superior to
ext[\d
Is there an easy way (from script ideally) to get the following
stats:
free physical mem (avail ram)
free swap
total avail mem
any two of the three would be great. If such a beast doesn't
exist, what are the easiest calls to use to get at them so I could
write some programs
: Is there an easy way (from script ideally) to get the following
:stats:
:
:free physical mem (avail ram)
This is going to be quite small on any busy machine, or machine that
has a reasonable uptime. The VM system will cache things unless
there's a demand for memory.
=
FreeBSD-SA-01:09Security Advisory
FreeBSD, Inc.
Topic: Local ego exploit
Category: (l)users
00.CO
M)=". There is list of infected files:
Found virus "VBS/LoveLetter.worm" in DOMEO.JPG.vbs
Please clean files and resend Your message, Your message was dropped.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
Subject: Re: Frustration with SCSI system
* Edward Elhauge [EMAIL PROTECTED] [000920 12:48] wrote:
Hello Freebsders,
I've been using FreeBSD over the last 6 years (since I switched from
NetBSD) to run a small ISP out of my basement.
I've had about six disk crashes i
. This is needed on some systems with broken
# keyboard controllers.
Thanks in advance
Richard Puga
[EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
Sorry for the stupid quiestion. I figured it out from LINT that is the
options SC_DISABLE_REBOOT # disable reboot key sequence
Thanks
Richard Puga
[EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
et
Adapter): Cannot allocate memory
Apr 29 10:13:38 ricoh pccardd[45]: driver allocation failed for Xircom(Ethernet
Adapter): Cannot allocate memory
##KERNEL CONFIG
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more infor
27 06:24:44 ricoh pccardd[409]: driver allocation failed for Xircom(Ethernet
Adapter): Device not configured
Apr 27 06:24:44 ricoh pccardd[409]: driver allocation failed for Xircom(Ethernet
Adapter): Device not configured
Ill keep trying as soon as I hear about updates...
RP
[EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
1 - 100 of 107 matches
Mail list logo
