On Wednesday 26 November 2003 07:33 pm, Eric Crist wrote:
Ok,
Read through that. Now I'm getting the following after running the make
buildworld:
[[snip]]
cc -fpic -DPIC -O -pipe -mcpu=pentiumpro -DPTHREAD_KERNEL
-I/usr/src/lib/libpthread/../libc/include
-I/usr/src/lib/libpthread/thread
Hello,
I too have set up a ipsec secured wireless network and this article
helped clarify some of the points that were a bit hazy.
Tunnel vs. transport mode was something I never fully understood. I did
notice that when using transport mode only the packets between the 2
participating hosts
Hi there,
i'm pretty new with freebsd. Currently i run a couple of sparc20 with
OpenBSD. But i want to
give Freebsd 5.1 a try. Unfortunately i cant get this Ultra2 with 2 CPUs
working. When boot with
first install CDROM it recognises the 2 cpus during the bootprocess and
start probing for
On Thursday 27 November 2003 09:35, Jens Baedeker wrote:
i'm pretty new with freebsd. Currently i run a couple of sparc20 with
OpenBSD. But i want to
give Freebsd 5.1 a try. Unfortunately i cant get this Ultra2 with 2 CPUs
working. When boot with
first install CDROM it recognises the 2 cpus
Hi all,
is there a driver that will work with the Realtek alc650 sound chip?
I have googled around and have not found anyone who has got this to
work. Any hack to get 2 channels working would be appreciated, if not
its back to Linux.
Thanks
Gary.
Hi :)
I upgraded two boxes to FreeBSD-5.2-BETA a week ago and I noticed that NFS
performance is very slow compared to 4.x-RELEASE.
Before, NFS transfers were between 10 and 12 MB/s and now I don't go past 7
MB/s.
My exports/mount settings did not change and the hardware is obviously the
same.
Hello everyone
I found that the NFS server in the 5.x series (currently 5.1) crashes
during portscans (because of the aborted connection to it).
Running nmap or Nessus against the machines requires a manual restart of
nfsd.
Do others here also have this problem?
I reproduced it on 5.0-RELEASE
I've moved to the 5.x branch since 5.0-RLEASE, currently, I'm running
5.1-RELEASE.
I'm now considering if I will do the upgrade to 5.2-RELEASE, or
reinstall the system with 4.9 or 4.10.
The 5.x branch seems to remain rather unstable longer then I had
anticipated.
What would you guys recommend,
I've moved to the 5.x branch since 5.0-RLEASE, currently, I'm running
5.1-RELEASE.
I'm now considering if I will do the upgrade to 5.2-RELEASE, or
reinstall the system with 4.9 or 4.10.
The 5.x branch seems to remain rather unstable longer then I had
anticipated.
What would you guys recommend,
On Thu, Nov 27, 2003 at 12:55:19AM -0500, Dragoncrest wrote:
[Warnings about ethernet addresses]
I'd like to know this too. I have a FreeBSD 4.8-RELEASE box that exhibits
the
same symptoms. The addresses it complains about belong to a colo box on our
network and a cisco router.
On Thu, Nov 27, 2003 at 10:12:21AM +0100, Antoine Jacoutot wrote:
Hi :)
I upgraded two boxes to FreeBSD-5.2-BETA a week ago and I noticed that NFS
performance is very slow compared to 4.x-RELEASE.
Before, NFS transfers were between 10 and 12 MB/s and now I don't go past 7
MB/s.
My
On Thu, Nov 27, 2003 at 10:18:00AM +0100, Guy Van Sanden wrote:
I've moved to the 5.x branch since 5.0-RLEASE, currently, I'm running
5.1-RELEASE.
I'm now considering if I will do the upgrade to 5.2-RELEASE, or
reinstall the system with 4.9 or 4.10.
The 5.x branch seems to remain rather
On Wed, Nov 26, 2003 at 02:00:27PM -0800, Kevin Stevens wrote:
If you're running the U10 headless, dropping DTR on the connection
will, by default, drop the U10 into OpenBoot, stopping execution of the
OS (this is true on most if all Sun boxes, not just the U10). There's
a simple setting
On Thursday 27 November 2003 10:28, Kris Kennaway wrote:
Try reading the basic documentation that comes with 5.2-BETA, for
example the /usr/src/UPDATING file, which tells you clearly that
performance is not expected to be good unless you disable the standard
I've been running CURRENT on test
On Wed, Nov 26, 2003 at 04:36:23PM -0500, Lowell Gilbert wrote:
Guilherme Starvaggi [EMAIL PROTECTED] writes:
I would like to know if the computer - NETRA T1 150 from SUN -
support the FREEBSD system? I am thinking in buy this computer, but I
have no experience with servers like this, and
Dear All,
Is there any body who install FreeBSD OS on
a four(4) processor motherboard?
Which version of FreeBSD support four processor?
Which type of motherboard is suitable for
handling FreeBSD OS as a firewall machine?At least 2
processor I need.
What is the last version of FreeBSD?
--Any
I just realized that when I compile with -lmysqlclient I am adding the
current version to my program or in my specific case libmysqlclient.so.10.
When I upgrade, as I just did, to libmysqlclient.so.12, I have to recompile.
Is there not a way to use libmysqlclient.so that is a link to the
On Thu, Nov 27, 2003 at 03:39:05AM -0800, Lee Mx wrote:
I just realized that when I compile with -lmysqlclient I am adding the
current version to my program or in my specific case libmysqlclient.so.10.
When I upgrade, as I just did, to libmysqlclient.so.12, I have to
recompile. Is there
Hi,
I recently installed a Dual P4 2.8ghz with FBSD 4.9 and made a RAID10
array of the 4 scsi disks available. The idea was that this would be
faster to read from than normal IDE disks. As a test I took the
company's web/ directory, which is 1.6gb in size and has 22082 files.
I extracted this
Hi all,
I'm going to move move my sendmail server to a new machine.
The new machine will use postfix and virtual users, now what I cant't
figure out is how to migrate the users (and keep the old passwords).
Does anyone know of a procedure to extract plain text passwords for all
users ?
Or maybe
Hi !
I have a little problem with acpi on the 4.9 release. I have compiled the
kernel with the device and dmesg
gives me the following:
bash-2.05b# dmesg |grep acpi
acpi0: DELL CPi on motherboard
acpi_cpu0: CPU on acpi0
acpi_tz0: thermal zone on acpi0
acpi_acad0: AC adapter on acpi0
Selon Jean-Baptiste Quenot [EMAIL PROTECTED]:
I know this error appears because sendmail starts before MIMEDefang,
so my question is: how can I make MIMEDefang starts before sendmail ?
The MIMEDefang startup script is located under /usr/local/etc/rc.d
Make a symlink from
# [EMAIL PROTECTED] / 2003-11-26 12:13:53 -0600:
In the last episode (Nov 26), fbsd_user said:
Looking for way to code IPFILTER rules with shell symbolic
substitution. I know how to do it in the rules, but how to get ipf
pgm to exec in shell? Any body have example of how to setup this?
Either try john the ripper or similar password crackers. (ports or
www.openwall.net)
-Original Message-
From: Rob Evers [mailto:[EMAIL PROTECTED]
Sent: 27 November 2003 13:51
To: [EMAIL PROTECTED]
Subject: migrating users
Hi all,
I'm going to move move my sendmail server to
Quoting Vince Hoffman ([EMAIL PROTECTED]):
I'm going to move move my sendmail server to a new machine.
figure out is how to migrate the users (and keep the old passwords).
Does anyone know of a procedure to extract plain text passwords for
all users ? Or maybe just pointers where to look.
I found that the NFS server in the 5.x series (currently 5.1) crashes
during portscans (because of the aborted connection to it).
Running nmap or Nessus against the machines requires a manual restart of
nfsd.
I just portscanned my 5.2-BETA box running NFS server, no problems.
What parameters
Sander Smeenk wrote:
Quoting Vince Hoffman ([EMAIL PROTECTED]):
I'm going to move move my sendmail server to a new machine.
figure out is how to migrate the users (and keep the old passwords).
Does anyone know of a procedure to extract plain text passwords for
all users ? Or maybe just
I just ran nmap host...
Nessus has the same effect.
Maybe this is fixed between 5.1 and 5.2.
On Thu, 2003-11-27 at 16:30, Michael L. Squires wrote:
I found that the NFS server in the 5.x series (currently 5.1) crashes
during portscans (because of the aborted connection to it).
Running nmap
John Ball [EMAIL PROTECTED] writes:
Hello I am trying to install freebsd over ftp on an older(266mhz pentium) noname
laptop.
Following the instructions I am stuck at one point...when I get to the boot: prompt
how do I get to the kernel configuratoin menu? There is some inconsistency
Matthew Seaman [EMAIL PROTECTED] writes:
Err... sparc64 is now a tier 1 supported architecture in 5.x: see
http://www.freebsd.org/releases/5.1R/hardware-sparc64.html and
http://www.freebsd.org/platforms/sparc.html
Oops; I was, indeed, mistaken.
___
Robin Schoonover [EMAIL PROTECTED] writes:
Hmm. I don't think this question is in the FAQ, but it seems asked often
enough. At least I didn't see it in there. Maybe it should get added...
I'm not in anyway indicating I want to help document, because I don't want
to end up get stuck doing
Since the last update of php4 and mod_php4 in the ports directory, they
are now mutually exclusive whereas before I had both installed
Currently, I have mod_php4-4.3.4.r1,1 and php4-4.3.4.r1 both installed.
Each port has been upgraded to 4.3.4_2,1 and 4.3.4_2 respectively
Most of the
Hi,
can someone help and tell me why I'm getting fork failed: Resource temporarily
unavailable?
I installed freebsd on new, and I upgrade my freebsd version to 5.1-rel,
configure rc.conf, syslog.conf, hosts.allow, ipfw, etc
all.log:Nov 27 05:15:40 devilz sm-mta[428]: runqueue: Skipping queue run
I was trying to portupgrade gnomemeeting-0.98.5 to 0.98.5_1 and ran into
issues with the openh323 dependency. Anyone have any ideas?
-Troy
In file included from /usr/ports/net/openh323/work/openh323/include/codecs.h:263, from
/usr/ports/net/openh323/work/openh323/include/h323caps.h:169, from
Hi,
There has been signifigant discussion here in the past about cdbakeoven not
detecting ATAPI burners when run as an ordinary user.
I had this issue, and may have a solution.
Be sure your kernel is compiled with device atapicam.
As root do:
# chmod u+s /usr/local/bin/cdrecord
Which will
Hi,
I've setup a firewall with a compact flash instead of a hard-drive. This is
the output of mount:
/dev/ad0s2a on / (ufs, local, read-only)
mfs:17 on /var (mfs, asynchronous, local)
procfs on /proc (procfs, local)
mfs:36 on /dev (mfs, asynchronous, local)
As you see, I mount the compact flash
Charles Howse [EMAIL PROTECTED] writes:
There has been signifigant discussion here in the past about cdbakeoven not
detecting ATAPI burners when run as an ordinary user.
I had this issue, and may have a solution.
Be sure your kernel is compiled with device atapicam.
As root do:
#
freebsd [EMAIL PROTECTED] writes:
It seems to have a big difference between the output of df and du.
My problem is, my /var partition is getting filled very quickly and I don't
know why ? I don't know what to clean. I've already deleted some log, but
I saved only 2% of free space or 1000
On Thursday 27 November 2003 11:16 am, Lowell Gilbert wrote:
Charles Howse [EMAIL PROTECTED] writes:
There has been signifigant discussion here in the past about cdbakeoven
not detecting ATAPI burners when run as an ordinary user.
I had this issue, and may have a solution.
Be sure
From: Matthew Seaman [EMAIL PROTECTED]
To: Lee Mx [EMAIL PROTECTED]
CC: [EMAIL PROTECTED]
Subject: Re: results of compiling with -lmysqlclient
Date: Thu, 27 Nov 2003 12:32:47 +
On Thu, Nov 27, 2003 at 03:39:05AM -0800, Lee Mx wrote:
I just realized that when I compile with -lmysqlclient I
Hi, I have just finished installing FreeBSD 4.7, everything is working
fine even X. When I use startx as root Gnome and enlightment loads,but
when I load on with my username and startx it loads Xterm. My question
is how do I get Gnome to load instead of xterm? I am new to freebsd and
am not
On Thursday 27 November 2003 12:05 pm, Ed Stewart wrote:
Hi, I have just finished installing FreeBSD 4.7, everything is working
fine even X. When I use startx as root Gnome and enlightment loads,but
when I load on with my username and startx it loads Xterm. My question
is how do I get Gnome to
I'm running 4.7 Release on one of my systems and am trying to install the
linux_base-8 from ports. It's failing with the following error:
=== linux_base-8-8.0_1 depends on executable: rpm - found
kern.fallback_elf_brand: 3 - 3
glibc-common-2.3.2-4.80.6.i386.rpm
/usr/sbin/build-locale-archive:
On Thursday 27 November 2003 12:09 pm, Chris wrote:
On Thursday 27 November 2003 12:05 pm, Ed Stewart wrote:
Hi, I have just finished installing FreeBSD 4.7, everything is working
fine even X. When I use startx as root Gnome and enlightment loads,but
when I load on with my username and
On Thursday 27 November 2003 12:05 pm, Ed Stewart wrote:
Hi, I have just finished installing FreeBSD 4.7, everything is working
fine even X. When I use startx as root Gnome and enlightment loads,but
when I load on with my username and startx it loads Xterm. My question
is how do I get Gnome to
Hello,
Did you edit your ~/.xinitrc with your user?
Try this:
exec gnome-session
and put it in this file: /home/youruser/.xinitrc
where youruser is your username.
Edwin
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Ed Stewart
Sent: Thursday, November
* Khairil Yusof:
home,end,cursor keys work, but tab doesn't work for commands. tab key
displays ^I instead.
Try:
:set nolist
:help 'nolist'
vim (insert mode):
up cursor= A + enter
left cursor = D + enter
right cursor = C + enter
down cursor = B + enter
This is a terminal
On Thu, Nov 27, 2003 at 09:39:28AM -0800, Lee Mx wrote:
THanks a lot, Matthew. I assumed as much. I think I am going to start
backing up some of my more frequent libs
to a compat directory. That seems to be the least bad solution.
Note that portupgrade(1) and pkg_deinstall(1) do this
On Thursday 27 November 2003 12:05 pm, Ed Stewart wrote:
Hi, I have just finished installing FreeBSD 4.7, everything is working
fine even X. When I use startx as root Gnome and enlightment loads,but
when I load on with my username and startx it loads Xterm. My question
is how do I get Gnome to
Hello:
I'm working on a server running FreeBSD 4.7-RELEASE.
I've developed a C server program that works fine. I want to
add code to read from and update fields in a MySQL database
to the original program. When I do I get compilation errors
that I cannot seem to resolve.
I have a number of
On Thu, 2003-11-27 at 11:46, Troy wrote:
I was trying to portupgrade gnomemeeting-0.98.5 to 0.98.5_1 and ran into
issues with the openh323 dependency. Anyone have any ideas?
Read the Known Issues section at http://www.freebsd.org/gnome.
Joe
-Troy
In file included from
* Steve Blair:
The errors I get are as follows. I get these if using cc or gcc to
compile the program.
host# cc -o locserv locserv.c
/tmp/ccJdDxg3.o: In function `main':
/tmp/ccJdDxg3.o(.text+0x6ca): undefined reference to `mysql_init'
/tmp/ccJdDxg3.o(.text+0x7bc): undefined reference
From: Matthew Seaman [EMAIL PROTECTED]
To: Lee Mx [EMAIL PROTECTED]
CC: [EMAIL PROTECTED]
Subject: Re: results of compiling with -lmysqlclient
Date: Thu, 27 Nov 2003 18:27:23 +
On Thu, Nov 27, 2003 at 09:39:28AM -0800, Lee Mx wrote:
THanks a lot, Matthew. I assumed as much. I think I am
Charles Howse wrote:
On Thursday 27 November 2003 11:16 am, Lowell Gilbert wrote:
Charles Howse [EMAIL PROTECTED] writes:
There has been signifigant discussion here in the past about cdbakeoven
not detecting ATAPI burners when run as an ordinary user.
I had this issue, and may have a
Happy Thanksgivings,
Was upgrading my ports and ran into the following error message :
** The following packages were not installed or upgraded (*:skipped /
!:failed)
! lang/librep (librep-0.16.2_2) (new compiler error)
* x11-toolkits/rep-gtk (rep-gtk-gnome-0.15_1)
Later
* Martin Moeller:
I'm a little bit confused because of the enormous number of terminal
types available. I'm mainly working on the console so cons25 is my
default terminal type.
Setting TERM to cons25 is okay. It does not prevent you to have colors.
In mutt, you must define the
On Thu, 2003-11-27 at 14:13, Bob Perry wrote:
Happy Thanksgivings,
Was upgrading my ports and ran into the following error message :
** The following packages were not installed or upgraded (*:skipped /
!:failed)
! lang/librep (librep-0.16.2_2) (new compiler error)
* Xpression:
Hi list, I installed Apache and ProFTPd servers, users can upload
tehir sites via FTP, I have configured in Apache DocumentRoot in
/usr/local/apache2/wwwroot, my question is: can I create users which
their home directories path is /usr/local/apache2/wwwroot/userN ???
On Thu, 2003-11-27 at 14:20, Joe Marcus Clarke wrote:
On Thu, 2003-11-27 at 14:13, Bob Perry wrote:
Happy Thanksgivings,
Was upgrading my ports and ran into the following error message :
** The following packages were not installed or upgraded (*:skipped /
!:failed)
On Thu, Nov 27, 2003 at 08:31:27PM +0100, Jean-Baptiste Quenot wrote:
3) If you want to have your user directories outside of the document
root, you will have to setup an Alias for each user, or to define
another virtual host. But that becomes close to solution 1 in that
Joe Marcus Clarke wrote:
On Thu, 2003-11-27 at 14:13, Bob Perry wrote:
Happy Thanksgivings,
Was upgrading my ports and ran into the following error message :
** The following packages were not installed or upgraded (*:skipped /
!:failed)
! lang/librep (librep-0.16.2_2) (new
On Thu, 2003-11-27 at 15:40, Bob Perry wrote:
[snip]
Hmm...I bet this machine was upgraded from -STABLE, and you still have a
/usr/lib/libgmp.so link. If you do, remove that file/symlink, and
librep should build.
Removed both the link /usr/lib/libgmp.so - libgmp.so.3 and the file
Gerard Samuel wrote:
I was fortunate to acquire a dual Slot one motherboard.
I currently only have one PIII 450 in there, and its working without any
problems so far.
This box is primarily for www/samba/cvs.
I was wondering if my PHP apps would benefit (run faster) if I
introduced a 2nd CPU.
On Thu, 27 Nov 2003, Jens Baedeker wrote:
Hi there,
i'm pretty new with freebsd. Currently i run a couple of sparc20 with
OpenBSD. But i want to
give Freebsd 5.1 a try. Unfortunately i cant get this Ultra2 with 2 CPUs
working. When boot with
first install CDROM it recognises the 2 cpus
Ion-Mihai Tetcu wrote:
I have a machine that randomly crashes. I wonder if lowering
Variable Default Description
kern.filedelay 30 time to delay syncing files
kern.dirdelay29 time to delay syncing directories
kern.metadelay 28 time to delay
I have installed FreeBSD 5.1 on my laptop and have successfully
installed KDE and other apps by going to the appropriate ports directory
and performing a 'make install clean'.
However, when I tried to install nautilus by going to
/usr/ports/x11-fm/nautilus and typing 'make install clean' (without
On Thu, 27 Nov 2003 08:18 pm, Guy Van Sanden wrote:
I'm now considering if I will do the upgrade to 5.2-RELEASE, or
reinstall the system with 4.9 or 4.10.
The 5.x branch seems to remain rather unstable longer then I had
anticipated.
Are you actually having problems running 5.1-RELEASE? I
Hi man,
Hi everyone,
Thanks for your replay, kindly the ppl here helped out,
and I sent a test email for this list which made greg angry!
and everything went fine.
I thought I had an reverse! but it was only forward!
I fixed that, and now im emailing from this golden, as you said
On Thu, 2003-11-27 at 17:28, Trey Sizemore wrote:
I have installed FreeBSD 5.1 on my laptop and have successfully
installed KDE and other apps by going to the appropriate ports directory
and performing a 'make install clean'.
However, when I tried to install nautilus by going to
Gerard Samuel wrote:
I was fortunate to acquire a dual Slot one motherboard.
I currently only have one PIII 450 in there, and its working without any
problems so far.
This box is primarily for www/samba/cvs.
I was wondering if my PHP apps would benefit (run faster) if I
introduced a
On Thursday 27 November 2003 03:05 pm, Trey Sizemore wrote:
On Thu, 2003-11-27 at 17:28, Trey Sizemore wrote:
I have installed FreeBSD 5.1 on my laptop and have successfully
installed KDE and other apps by going to the appropriate ports directory
and performing a 'make install clean'.
On Thu, 27 Nov 2003 18:05:10 -0500
Trey Sizemore [EMAIL PROTECTED] wrote:
On Thu, 2003-11-27 at 17:28, Trey Sizemore wrote:
I have installed FreeBSD 5.1 on my laptop and have successfully
installed KDE and other apps by going to the appropriate ports
directory and performing a 'make
Charles Howse [EMAIL PROTECTED] writes:
On Thursday 27 November 2003 11:16 am, Lowell Gilbert wrote:
Charles Howse [EMAIL PROTECTED] writes:
There has been signifigant discussion here in the past about cdbakeoven
not detecting ATAPI burners when run as an ordinary user.
I had this
On Thu, 2003-11-27 at 18:12, Ion-Mihai Tetcu wrote:
Do a ls and see if you have a Makefile :)
You probably have only a readme.html file in that directory which is the
reason the directory itself wasn't deleted by cvsup.
it# grep nautilus /usr/ports/MOVED
Hi,
I'm wondering if the following situation would be possible:
I have a small LAN (one server, three workstations) and want to fully
encrypt it (since it's quite easy for somebody to plug into my switch --
I'm at university and the machines are in my room).
What I would like is for my
I am, not found
PDFlib-Lite-5.0.0-Unix-src.tar.gz
In the your site in the ports colection.
you will have a copy of this pkg
Atte. Víctor Gutiérrez Cruz
Si vales, valeo
(Antiguo saludo en Latín que significa:
Si tu estas bien yo estoy bien)
On Thursday 27 November 2003 03:10 pm, JacobRhoden wrote:
Gerard Samuel wrote:
I was fortunate to acquire a dual Slot one motherboard.
I currently only have one PIII 450 in there, and its working without
any problems so far.
This box is primarily for www/samba/cvs.
I was wondering
On Fri, 28 Nov 2003 01:12:53 +0200
Ion-Mihai Tetcu [EMAIL PROTECTED] wrote:
On Thu, 27 Nov 2003 18:05:10 -0500
Trey Sizemore [EMAIL PROTECTED] wrote:
On Thu, 2003-11-27 at 17:28, Trey Sizemore wrote:
I have installed FreeBSD 5.1 on my laptop and have successfully
installed KDE and
On Thursday 27 November 2003 05:12 pm, Lowell Gilbert wrote:
Charles Howse [EMAIL PROTECTED] writes:
On Thursday 27 November 2003 11:16 am, Lowell Gilbert wrote:
Charles Howse [EMAIL PROTECTED] writes:
There has been signifigant discussion here in the past about
cdbakeoven not
Hi,
I've been using login.access for a long while, it hasnt occured to me until now that
sshd isnt taking that file into account. No users (except me) can log in to my system
with telnet and they shouldnt with sshd.
Is there a workaround for this? Wouldnt it be considered a serious bug that
On Thu, 2003-11-27 at 18:29, Ion-Mihai Tetcu wrote:
I think that if you do :
cd / find /usr/ports/ -type f -name 'readme.html' -exec rm {} \;
and cvsup again you'll get rid of the old directories.
Thanks...I'll give that a try.
--
Cheers,
Trey
---
At a given moment I open my eyes and
s/transparent/transport
My bad, sorry.
-lewiz.
--
I was so much older then, I'm younger than that now. --Bob Dylan, 1964.
-| msn:[EMAIL PROTECTED] | jabber:[EMAIL PROTECTED] | url:www.lewiz.org |-
pgp0.pgp
Charles Howse [EMAIL PROTECTED] writes:
I agree with you 100%. Though I didn't say it explicitly, my comments were
directed not to administrators where there is concern for local user
security, but to plain ordinary desktop users who just want to burn some
CD's.
In my opinion, it is
On Thursday 27 November 2003 05:47 pm, Lowell Gilbert wrote:
Charles Howse [EMAIL PROTECTED] writes:
I agree with you 100%. Though I didn't say it explicitly, my comments
were directed not to administrators where there is concern for local user
security, but to plain ordinary desktop users
Joe Marcus Clarke wrote:
On Thu, 2003-11-27 at 15:40, Bob Perry wrote:
[snip]
Hmm...I bet this machine was upgraded from -STABLE, and you still have a
/usr/lib/libgmp.so link. If you do, remove that file/symlink, and
librep should build.
Removed both the link /usr/lib/libgmp.so -
On Thu, 27 Nov 2003, Dragoncrest wrote:
Mergemaster is definately one way to do it, but I prefer
Portupgrade. It's much simpler as far as I'm concerned and
does as good a job as mergemaster with less thinking involved
on the part of the user. :)
Confusion!
Hi list, I'm trying to install MySQL-4.0.16 on my
FreeBSD-4.5 Server and always give me ERROR, anyone running
it can help me ???
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
Hello everyone,
While a rotine checks for my log files,
I found the following lines in the end of my dmesg.today log file
I would appreciate it if someone could explain these lines.
The lines are:
Limiting closed port RST response from 268 to 200 packets per second
Limiting closed
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
On Thursday 27 November 2003 21:27, Marwan Sultan wrote:
Limiting closed port RST response from 268 to 200 packets per second
Someone more than likely tried to portscan you and the kernel adjusted the
amount of RST responses it sent back.
-
Network topology:
LAN == FreeBSD Gateway == Internet
Gateway specifications:
FreeBSD overlord 4.8-STABLE FreeBSD 4.8-STABLE #0: Mon Sep 22 07:05:09 CDT
2003
k6-233, 128MB ram
ipf packet filtering in place
Internet (cable):
256kb up
2.0mbish down
==
It seems an impossible task to limit
You need to uninstall the ffmpeg package, do a make clean in
net/openh323 and it should compile ok.
Seeya...Q
On Fri, 2003-11-28 at 02:46, Troy wrote:
I was trying to portupgrade gnomemeeting-0.98.5 to 0.98.5_1 and ran into
issues with the openh323 dependency. Anyone have any ideas?
-Troy
Hi there,
I'm currently playing with a quite simple network infrastructure :
---
| INTERNET|
---
| |
|R1|---|R2|
| |
-----
| SWITCH ||servers co|
-----
R1 R2 are
I think I can handle the dhcp config, it's just a matter of solving the first
problem.
There are no errors in dmesg,but they are both using irq11 as follows:
pcic0 irq 11 at device 3.0 on pci0
pcic1 irq 11 at device 3.1 on pci0
Memory allocation is different for each.
0x8800
0x88001000
Ken
Hi all,
I have a rather annoying problem here. I can't seem to build mozilla
from ports (cvsuped at 06:13GMT today). I'm not sure if this is freebsd
related but perhaps someone has had a similar problem. I'm running a P4
2.8GHz 800FSB and have tried CPUTYPE set to p4, i686, i386 in
On Fri, 2003-11-28 at 01:18, Byron Schlemmer wrote:
Hi all,
I have a rather annoying problem here. I can't seem to build mozilla
from ports (cvsuped at 06:13GMT today). I'm not sure if this is freebsd
related but perhaps someone has had a similar problem. I'm running a P4
2.8GHz 800FSB and
check this out - I have a fbsd 4.6 box on my network, as well as a
fbsd5.1 box and several XP boxes. I have a netgear router/firewall (also
does dhcp and print server) box as well. The 4.6 box is set up on the
network, the netgear dhcp server finds the box, as well as the 5.1 box,
so they are
On Fri, 2003-11-28 at 08:26, Joe Marcus Clarke wrote:
CPUTYPE=p4 is not supported in 5.1-RELEASE, but was compensated for by
using p3 internally. However, I bet you're still using non-standard
Ah, okay. Thanks for that.
CFLAGS or CXXFLAGS. If so, switch back to using default
97 matches
Mail list logo