Hi,
I know this question has been raised a lot of times, and most of
people don't think it is necessary to defragment ufs, and from the
previous posts, I got to know there are sometimes, disksize can be
more than 100%
But...
I got ...
/dev/ar0s1a: ... 0.5% fragmentation
/dev/ar0s1e: ... 0.0% fr
--- Vladimir Botka <[EMAIL PROTECTED]> wrote:
> Hi,
> I am running Speedtouch 510i, which is defacto
> router with some small unix
> system inside. You can login with telnet and
> configure it from command
> line or use the web interface or load the
> configuration file. I dont
> think that U
Hi,
I am running Speedtouch 510i, which is defacto router with some small unix
system inside. You can login with telnet and configure it from command
line or use the web interface or load the configuration from file. I dont
think that USB and pppoa is here the best choice. You just connect the
Try:
+chsfirewall1
local6.notice /var/log/firewall/chsfirewall1.log
+*
+chsfirewall2
local6.notice /var/log/firewall/chsfirewall2.log
+*
If that doesn't work try running syslog in debug:
kill -9 `cat /var/run/syslog.pid`
syslogd -d -v -a 172.24.169.44/32:*
On Saturday, 13 August 2005 at 20:07:00 -0700, Bsderss wrote:
On Saturday, 13 August 2005 at 20:07:23 -0700, Bsderss wrote:
On Saturday, 13 August 2005 at 20:07:32 -0700, Bsderss wrote:
>
> I want to purchase a USB Alcatel Speedtouch PC ADSL
> Modem and connection freebsd to it.
Good idea! I trus
Hi,
I want to purchase a USB Alcatel Speedtouch PC ADSL
Modem and connection freebsd to it. There is a pkg in
the Ports
/usr/ports/net/pppoa written for the Alcatel
Speedtouch. I wonder how to use this pkg with the
Alcatel Speedtouch PC ADSL Modem. Correct me if I m
wrong, this modem does not have
Hi,
I want to purchase a USB Alcatel Speedtouch PC ADSL
Modem and connection freebsd to it. There is a pkg in
the Ports
/usr/ports/net/pppoa written for the Alcatel
Speedtouch. I wonder how to use this pkg with the
Alcatel Speedtouch PC ADSL Modem. Correct me if I m
wrong, this modem does not have
Hi,
I want to purchase a USB Alcatel Speedtouch PC ADSL
Modem and connection freebsd to it. There is a pkg in
the Ports
/usr/ports/net/pppoa written for the Alcatel
Speedtouch. I wonder how to use this pkg with the
Alcatel Speedtouch PC ADSL Modem. Correct me if I m
wrong, this modem does not have
On Sat, 13 Aug 2005, Carstea Catalin wrote:
I want a fresh instalation on my server and i want to setup RAID. Can u help
me?
Before someone can help you, you should decide
1) which RAID level you want to use,
2) if you want a software or a hardware RAID,
3) which version of FreeBSD you are goi
On Sun, 14 Aug 2005, Charles Smyth wrote:
I~Rm trying out fvwm2 on a FreeBSD 5.4 box with Xorg The XTerm uses a
small font as default. How can the font be made larger, and how can
the XTerm window be made larger by default.
Look in the file /usr/X11R6/etc/system.fvwm2rc. Assuming you're talki
Hi,
Im trying out fvwm2 on a FreeBSD 5.4 box with Xorg The XTerm uses a small font
as default. How can the font be made larger, and how can the XTerm window be
made larger by default.
Thanks
Charles Smyth
___
freebsd-questions@freebsd.org mailing lis
I've been trying to set up IPFW to do port forwarding so I can use a machine
on a private network as a web server. I'm using NAT, which works fine, but
can't seem to get port forwarding working unless I remove the "deny ip from
any to any" in my firewall script.
natd.conf:
interface en0
dynam
I have a STB capture card, distributed in an OEM package by Gateway.
(I purchased it through eBay for $12.) It has a bt878 chip, and I have
it hooked to an SB Live! card with a four-pin audio cable, internally.
The card has both RCA and S-Video video inputs, a 'headphone'-style
jack for audio input
[EMAIL PROTECTED] wrote:
Hi,
I have 2 apple 20" displays and was cannot find info on what vidcard
I should get that is best supported by FreeBSD 5.4 and X.
If dual DVI support is not an option for freebsd ( which I hope the
hell it is)
what would a good vidcard be with single DVI suppor
joda pain wrote:
I am so new(3-4 days solid) at this OS. I have tried to find good help
to no pervail. You are the first person to answer a question direct
and not send me to man pages or the handbook? I truly am a lost soul
with this but I refuse to return to Win or Mac OS. If there is
directio
On Sat, Aug 13, 2005 at 12:35:48PM +, Bryan Maynard wrote:
> It seems like the suid bit means that only the file owner can execute
> the file. Is this true?
No. It means that if this program is run (by any user) it will have
their user id (uid) set to the owner of the programs binary, which is
On 8/13/05, Bryan Maynard <[EMAIL PROTECTED]> wrote:
> I'm setting up a web/mail/source coude server for my open source project
> and am using FreeBSD.
>
> My first concern is security. I read through the appropriate area of the
> Handbook and really enjoyed it. However, I do not know what suid, g
i had installed FreeBSD 5.4
from CD's ( ISO i get with ftp from freebsd.org and
burned with nero 6 on windows)
but the Installation package Apache Web Server Failure
But the FreeBSD it is running
thanks for your help
___
i can not mount the media cd-r and cd-rw on FreeBSD
5.4
i have FreeBSD 5.4 with KDE 3.4
when i try acces the data on cd that i burn with Nero
6 (on Windows) i not can saw the files ( with
Konqueror )
when i try mout the cd-rom or cd-rw on the System ,
Administrator , Storage-Media i see this mess
initial i386 initialization ibcs2module_register_init:
error -45
i have installed FreeBSD 5.4
on the boot i view this message
initial i386 initialization ibcs2module_register_init:
error -45
after boot KDE Environment KDE 3.4 is good
what it is the problem ?
thanks for your help
I want a fresh instalation on my server and i want to setup RAID. Can u help
me?
Tk. very much!
Carstea Catalin
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
Bryan Maynard wrote:
I'm setting up a web/mail/source coude server for my open source project
and am using FreeBSD.
My first concern is security. I read through the appropriate area of the
Handbook and really enjoyed it. However, I do not know what suid, guid,
and the like are. I've look up t
I'm setting up a web/mail/source coude server for my open source project
and am using FreeBSD.
My first concern is security. I read through the appropriate area of the
Handbook and really enjoyed it. However, I do not know what suid, guid,
and the like are. I've look up the man pages, but am st
I looked in the hypertext man pages, but the "supported" scanners
(uscanner driver) all seem a bit old.
Than I looked at SANE-cvs (the latest). There also most modern cheap
scanners you see in store today don't seem to be supported.
EpsonPerfection 2480/2580/3170 or CanoScan4200F or the cheaper
HP
Andrea Venturoli wrote:
bob self wrote:
I'm running 5.4 RELEASE. I have two identical hard drives. I
installed FreeBSD on the first drive and then
turned on gmirror. The 2nd drive sync'd in about 3 hours. I did
create a swap partition, but part of the
procedure that I found to start gmirror
I installed and when I run Xorg -configure or even try
to
use a known working xorg.conf I am getting a fatal
server error.
my hardware is
Asus a7m266-d 2x mp 1800s
1gb ram
cheap nvidia geforce card
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has
On Sat, 13 Aug 2005, Giorgos Keramidas wrote:
> On 2005-08-12 13:38, Benson Wong <[EMAIL PROTECTED]> wrote:
> > I prefer:
> >
> > for COREFILE in `find / -type f -name core -print`
> > do
> > ...
> > done
> >
> > Wouldn't that accomplish the same thing?
>
> More or less. Less, when
Message originally "cpan/bsdpan/ports need help".
Really need help here. I really botched up perl
& cpan & can no longer do some portugrading, either,
that I need. Pasting the original message with threads
in below here. Hate to reinstall system, since all
other is working okay.
Original thread h
On Friday 12 August 2005 18:30, Gary W. Swearingen wrote:
> Dmitry Mityugov <[EMAIL PROTECTED]> writes:
> > I am not sure how safe it is. Is it safe to use a HDD partitioned and
> > formatted by one version of FreeBSD with a newer version? I know there
>
> I recently ran into the problem of not bei
On 8/12/05, Kliment Andreev <[EMAIL PROTECTED]> wrote:
> Maude User wrote:
> > Thanks for this info.
> >
> > The handbook chapter on BIOS (see below) doesn't mention "USB" but it
> > says the machine
> > can boot from "Removable Devices" so it sounds like your first
> > suggestion about booting fro
On 8/13/05, Carstea Catalin <[EMAIL PROTECTED]> wrote:
> How can i "share" ( with chmod for example ) for only some users ( web
> programmers ) only one directory where they can put his web pages.
> Ex : "share" : /var/www/html/dir1
> for user1,user2,user3
> If user1 make ssh on my server he can v
On Sat, 13 Aug 2005 01:33:47 -0700
Carstea Catalin <[EMAIL PROTECTED]> wrote:
> How can i "share" ( with chmod for example ) for only some users
> ( web programmers ) only one directory where they can put his web
> pages. Ex : "share" : /var/www/html/dir1
> for user1,user2,user3
> If user1 make s
Maude User wrote:
Can I install FreeBSD 5.3 from this USB CD drive?
Haven't tried 5.3, but 6.0 beta2 works fine as long as your mobo
supports booting from usbcd - the tyan should do it.
in my case 4.9 + 5.4 find the USB drive, but they panic on boot - but it
doesnt relate to the usb cd, sam
Carstea Catalin wrote:
I know if i want some better performance with my server i must setup some
parameters:
man tuning
man google ;)
Ex:
sysctl kern.ipc.nmbcluster=3276
not so sure this is to increase performance, but rather to make sure you
don't run out of network buffers (I guess if yo
Carstea Catalin wrote:
How can i "share" ( with chmod for example ) for only some users ( web
programmers ) only one directory where they can put his web pages.
Ex : "share" : /var/www/html/dir1
for user1,user2,user3
If user1 make ssh on my server he can view,read,modify,remove only files
fro
I know if i want some better performance with my server i must setup some
parameters:
Ex:
sysctl kern.ipc.nmbcluster=3276
..
What others parameters do u recomand for squid server with >100 connections?
TKS!
__
I use static IP's
I've tried:
# ifconfig ath0 inet 192.168.200.20 netmask 255.255.255.0 ssid myessid wepkey
1:0xXX wepmode on
but still doesn't work.
without WEP works well, but I need WEP.
--- On Fri 08/12, nawcom < [EMAIL PROTECTED] > wrote:
From: nawcom [mail
Am Samstag, 13. August 2005 10:53 CEST schrieb David Malone:
> On Fri, Aug 12, 2005 at 08:53:20PM +0200, Emanuel Strobl wrote:
> > Now in the 24-16-24 scheme of th interface id part of the IPv6
> > address, the 16 bits were inserted with the value FFFE. And bit 57 was
> > changed to one! Why Wh
As far as I understand, Swapoff="Yes" doesn't disable the swapfile, it just
purges it on shutdown or something. I'm not quite sure of the need of this
with mirroring but I do see it in the gmirror doc.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of bob se
Huajian Luo <[EMAIL PROTECTED]> wrote:
> I've just buildkernel and xorg and foud that my compaq ynaptics
> Touchpad driver
> can't work and I congfigure psm as the man page told me with no luck. and I
> hate
> to use mouse while put the laptop on lap. and I just install xorg from
> 5.4 stable tr
On Fri, Aug 12, 2005 at 08:53:20PM +0200, Emanuel Strobl wrote:
> Now in the 24-16-24 scheme of th interface id part of the IPv6 address, the
> 16 bits were inserted with the value FFFE. And bit 57 was changed to one!
> Why What if it is alread one? Or isn't tehre any vendor who can have
> b
Ted Mittelstaedt wrote:
> No. I assume that the HP Linux driver has this sort of functionality
> in it - but maybe not. Not even the Windows driver for the RAID card
> can do this.
Ok.
> HP has used an agent/manager model with these systems. The drivers
> for the hardware in the system all talk
How can i "share" ( with chmod for example ) for only some users ( web
programmers ) only one directory where they can put his web pages.
Ex : "share" : /var/www/html/dir1
for user1,user2,user3
If user1 make ssh on my server he can view,read,modify,remove only files
from /var/www/html/dir1
On Friday 12 August 2005 11:43 pm, Huajian Luo wrote:
> Hi, there
>
> I've just screwed up my device.hints file when using echo "blah" >
> /boot/devides.hints,
> and blasted away all the configure file and now when I boot the
> fbsd5.4 there is no
> dmesg scroll up the screen, and same to reboot,
So, what is better in 5.x? LinuxThreads or native threads?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Kris Kennaway
Sent: Wednesday, August 10, 2005 7:04 PM
To: Aaron Peterson
Cc: FreeBSD Questions
Subject: Re: threading - good, bad, ugly?
On Wed, Au
Hi,
I've just buildkernel and xorg and foud that my compaq ynaptics
Touchpad driver
can't work and I congfigure psm as the man page told me with no luck. and I hate
to use mouse while put the laptop on lap. and I just install xorg from
5.4 stable tree
and ion2 , so need I add sth in the xorg.conf
Hi, there
I've just screwed up my device.hints file when using echo "blah" >
/boot/devides.hints,
and blasted away all the configure file and now when I boot the
fbsd5.4 there is no
dmesg scroll up the screen, and same to reboot, so can somebody tell me how to
recover this file and let me see
47 matches
Mail list logo
