On 24-May-07, at 12:33 AM, Doug Hardie wrote:
On May 23, 2007, at 19:03, Jason Lixfeld wrote:
On 23-May-07, at 9:23 PM, Doug Hardie wrote:
The criteria for selecting a backup approach is not the backup
methodology but the restore methodology.
Excellent point.
Perhaps I'm asking
On 24-May-07, at 3:16 AM, Olivier Nicole wrote:
2 x system space would be enough for a full dump plus plenty of
increments, I'd say. No? Is there a rule of thumb? 3x? 4x?
That depends how much your file system change. If every ficle change
befor the incremental run, dump 1 will be equal
On 24-May-07, at 3:43 AM, Doug Hardie wrote:
Rsync will leave you with a duplicate of the drive. You could
pretty much boot off it and run. You would need to configure the
drive and install a boot loader though.
The boot off and run is more in-line with what I want to do, so I
will go
So I feel a need to start backing up my servers. To that end, I've
decided that it's easier for me to grab an external USB drive instead
of a tape. It would seem dump/restore are the tools of choice. My
backup strategy is pretty much I don't want to be screwed if my RAID
goes away.
On 23-May-07, at 9:23 PM, Doug Hardie wrote:
The criteria for selecting a backup approach is not the backup
methodology but the restore methodology.
Excellent point.
Perhaps I'm asking the wrong question, so let me try it this way
instead:
I'm looking for a backup solution that I can
Not claiming to know much about anything, but can't seem to get this
to compile. The only things that stand out are the preprocessor
error (which I don't know enough about to even begin to troubleshoot)
and the tiffio.h no such file error. I can vouch for the existence
of the tiffio.h in
On 29-Sep-06, at 3:21 PM, Kris Kennaway wrote:
On Fri, Sep 29, 2006 at 03:15:50PM -0400, Jason Lixfeld wrote:
Not claiming to know much about anything, but can't seem to get this
to compile. The only things that stand out are the preprocessor
error (which I don't know enough about to even
(Please forgive the verbosity of this note)
I have two identically configured Dell PowerEdge 1850 servers running
FreeBSD 6.1-R-p3. Both of these machines seem to lock up under
whatever load conditions are are present during compiling
applications. The most recent lockup on one machine
I don't like the idea of having to run Linux because their system
tools just don't compare to FreeBSD, but I have had bad experience in
the past with FreeBSD + Asterisk using software timing. This time
around, I have a TDM400P with an FXO for timing, but I'm not sure
what the zaptel
I have a system running 6.1-RELEASE, OpenLDAP 2.3.23, Pam-LDAP 1.80
and NSS-LDAP 1.249.
I have a user, called testuser configured in LDAP.
I can ssh [EMAIL PROTECTED] and it works no problem.
If I try to ssh into the box from another host, it fails. What I see
in the ssh debug during the
On 23-May-06, at 8:48 PM, Atom Powers wrote:
On 5/23/06, Jason Lixfeld jason+lists.freebsd-
[EMAIL PROTECTED] wrote:
I'm using openssh-portable and the latest versions of openldap,
pam_ldap and nss_ldap. It appears as though the system is using
...
I'm not using ssh-portable, but I have
I don't seem to have this problem:
[EMAIL PROTECTED]:~$finger apowers
finger: apowers: no such user
[EMAIL PROTECTED]:~$id apowers
uid=1133(apowers) gid=1133(apowers) groups=1133(apowers), 0(wheel)
[EMAIL PROTECTED]:~$ssh localhost
Password:
FreeBSD 6.1-RELEASE (SMP) #0: Sun May 7 04:42:56 UTC
On 24-May-06, at 6:15 PM, Ansar Mohammed wrote:
Have you tried nss_ldap without pam?
How is that even possible?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
I'm using openssh-portable and the latest versions of openldap,
pam_ldap and nss_ldap. It appears as though the system is using
ldap, but I can't seem to ssh in as an LDAP user. I get a permission
denied. ssh debugs don't show anything useful and openldap debugs
don't seem to show any
On 18-May-06, at 11:55 PM, Norberto Meijome wrote:
On Thu, 18 May 2006 22:09:50 -0400
Jason Lixfeld [EMAIL PROTECTED] wrote:
Is this supported?
ugen seems to pick it up:
ugen0: vendor 0x06cd product 0x0118, rev 1.00/80.01, addr 2
$ grep 0x06cd /usr/src/sys/dev/usb/usbdevs
vendor KEYSPAN
On 19-May-06, at 8:58 AM, David Robillard wrote:
On Thu, 18 May 2006 22:09:50 -0400
Jason Lixfeld [EMAIL PROTECTED] wrote:
Do you have ucom device in your kernel?
Yup:
# egrep ugen|ucom /usr/src/sys/amd64/conf/RICKY
device ugen# Generic
device ucom
#
after you
Oh, and incase it matters.. It's a USA-19QW.
On 19-May-06, at 12:49 PM, Jason Lixfeld wrote:
On 19-May-06, at 8:58 AM, David Robillard wrote:
On Thu, 18 May 2006 22:09:50 -0400
Jason Lixfeld [EMAIL PROTECTED] wrote:
Do you have ucom device in your kernel?
Yup:
# egrep ugen|ucom /usr/src
Is this supported?
ugen seems to pick it up:
ugen0: vendor 0x06cd product 0x0118, rev 1.00/80.01, addr 2
$ grep 0x06cd /usr/src/sys/dev/usb/usbdevs
vendor KEYSPAN 0x06cd Keyspan
$
But I can't seem to access it...
Does/can it work? If not, what vendor USB2Serial adapter do I need
:
On Tue, 16 May 2006 19:15:06 -0400
Jason Lixfeld [EMAIL PROTECTED] wrote:
On 16-May-06, at 1:01 PM, Bill Moran wrote:
DRAC is irrelevant to FreeBSD. Configure it in the BIOS (give it an
IP and the like) and you can use a web browser to get a console
window.
(True console, so that you can
On 17-May-06, at 12:05 PM, Howard Jones wrote:
Jason Lixfeld wrote:
Well, I managed to sort it out. The grey area was that the Dell
BMC just needed an IP, username and password configured on it. I
was under the mistaken impression that the OpenIPMI needed to be
installed to speak
I've got a couple of Dell PowerEdge 1850s, one of which has FreeBSD
6.1-RELEASE on it.
I'm trying to figure out the best way to monitor these boxes. I'm
interested in RAID status more than anything else, but I'd like to
get as many of the sensors working as possible.
What I'm confused
On 16-May-06, at 1:01 PM, Bill Moran wrote:
If it's the right type of driver, the megarc port might be helpful.
Works on our Dells.
This was a huge help! Worked on both boxes, the FreeBSD box and the
linux box. Fantastic suggestion, thank you!
DRAC is irrelevant to FreeBSD.
Hi.
Anyone have any insight on this?
On 18-Oct-04, at 1:07 AM, Jason Lixfeld wrote:
I'm wondering if someone can point out my error here. I've got PAM
authenticating ssh users like so:
authrequiredpam_nologin.so no_warn
authsufficient
I'm wondering if someone can point out my error here. I've got PAM
authenticating ssh users like so:
authrequiredpam_nologin.so no_warn
authsufficient pam_opie.so no_warn
no_fake_prompts
authrequisite
I've tried proftp but the documentation sucks and I'm having an
impossible time trying to get it to work with my LDAP server so I'm
looking for alternatives. Anyone know any that support ldaps:///
connections to an external ldap server? I haven't been able to get pam
working with proftpd
On Apr 17, 2004, at 10:23 AM, Kris Kennaway wrote:
On Sat, Apr 17, 2004 at 11:44:25AM +0100, Matthew Seaman wrote:
In the mean time, you need a work-around. I'm not sure if you can run
FreeBSD 5.x in 32bit mode on an AMD64 box, but that might be a thing
to try.
You can...it runs just like a
message:
From: Jason Lixfeld [EMAIL PROTECTED]
Date: April 17, 2004 12:38:44 AM EDT
To: [EMAIL PROTECTED]
Subject: Call For Assistance #4 - slapd won't die gracefully, multiple
versions.
My machine is AMD64. I'm running 5.2.1-RELEASE-p1. I've tried 2.1.29,
2.1.30, 2.2.7, 2.2.8 and 2.2.10 all
I've got an AMD64 system running 5.2.1-RELEASE-p1 that doesn't run
openldap 2.2 properly. I'm trying to troubleshoot the issue and would
like to try to compile the openldap port as 32bit instead of 64bit.
Can anyone point me to some documentation on how I can best go about
this?
Thanks in
This may be more of a [EMAIL PROTECTED] question, but I figure I'd
ask here as well anyway.
su-2.05b# uname -a
FreeBSD spam.kill.er 5.2.1-RELEASE-p1 FreeBSD 5.2.1-RELEASE-p1 #25: Fri
Mar 5 03:51:13 EST 2004
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/ESHARA amd64
su-2.05b#
Very new to ldap +
I've got 5.2.1-RELEASE installed on an AccelerTech AT02161-A board
running a single 1.4Ghz Opteron. The board has the PDC20319 onboard.
I've got a Seagate 120GB drive attached to both SATA channels 2 and 3.
The raid 1 array was created in the Promise bios and the OS was
installed on the
kill ntpd, delete the drift file and restart.
On Feb 25, 2004, at 3:25 PM, Henning, Brian wrote:
Chris,
I am trying to use the same setup as you have to get ntpd working.
touch /var/db/ntpd.drift
In my rc.conf file I have to use the following
xntpd_enable=YES
xntpd_program=/usr/sbin/ntpd
Anyone have any ideas?
optionsIPSEC #IP security
optionsIPSEC_ESP #IP security (crypto; define w/
IPSEC)
optionsIPSEC_DEBUG #debug for IP security
su-2.05b# make buildkernel KERNCONF=ESHARA
...
...
sh /usr/src/sys/conf/newvers.sh ESHARA
On Feb 24, 2004, at 7:12 PM, Kris Kennaway wrote:
On Tue, Feb 24, 2004 at 07:08:58PM -0500, Jason Lixfeld wrote:
Anyone have any ideas?
Post your cvsupfile..you may have an incomplete source tree.
*default host=cvsup12.freebsd.org
*default prefix=/usr
*default release=cvs tag
On Feb 24, 2004, at 7:16 PM, Jason Lixfeld wrote:
*default host=cvsup12.freebsd.org
*default prefix=/usr
*default release=cvs tag=RELENG_5_2_1_RELEASE
*default delete use-rel-suffix
*default compress
src-all
for shits and giggles I ran cvsup against cvsup.freebsd.org:
su-2.05b# cvsup -Z -g -L 2
make buildkernel keeps failing here:
=== accf_data
cc -O -fPIC -D_KERNEL -DKLD_MODULE -nostdinc -I- -include
/usr/obj/usr/src/sys/ESHARA/opt_global.h -I. -I@ -I@/../include
-finline-limit=8000 -fno-common -I/usr/obj/usr/src/sys/ESHARA
-mcmodel=kernel -mno-red-zone -mfpmath=387 -mno-sse
On Feb 23, 2004, at 12:38 AM, Peter Wemm wrote:
On Sunday 22 February 2004 08:29 pm, Jason Lixfeld wrote:
make buildkernel keeps failing here:
=== accf_data
cc -O -fPIC -D_KERNEL -DKLD_MODULE -nostdinc -I- -include
Stop right here! You've removed the 'makeoptions NO_MODULES=notyet'
from
36 matches
Mail list logo
