-Original Message-
From: Valentin Bud [mailto:valentin@gmail.com]
Sent: Thursday, June 18, 2009 1:36 AM
To: Mike Sweetser - Adhost
Cc: freebsd-questions@freebsd.org
Subject: Re: PF Routing to VPN Device
On Wed, Jun 17, 2009 at 10:31 PM, Mike Sweetser - Adhost
mik
Hello,
We have a network with a VPN device sitting beside a PF server, both
connected to an internal network.
PF Server: 10.1.4.1
VPN Device: 10.1.4.200
The VPNs are set up for 10.1.1.0/24 and 10.1.2.0/24, so any traffic to
these networks should be routed to 10.1.4.200. We've set up routes
Hello,
We've recently upgraded our PF firewalls from FreeBSD 6.3 to FreeBSD
7.1-RELEASE-p2. Since doing so, we are receiving intermittent errors on
reloading the PF configuration.
At first, we receive Cannot allocate memory errors on specific table
names. These tables worked properly on
Hello:
We currently have a primary/failover setup for two FreeBSD 6.3 servers
running PF, and we're running into odd issues when setting up multiple
subnets on a single VLAN and CARP interface. We have issues with them
coming up properly, and even worse, having both servers believe they are
Hello:
We're noticing some unexpected behavior regarding load balancing with
our FreeBSD 6.2 server running PF.
We have a pool set up for a two-server cluster:
table web_183_roundrobin persist { \
192.168.1.183 \
192.168.2.183 \
}
web_183_ext=xxx.xxx.xxx.183
And the following rdr rule
Hello,
I'm attempting to set up a transparent bridge in FreeBSD 7.0 to
eventually act as a PF/Snort box, and it needs to be VLAN aware.
However, I don't seem to be on the right track as far as setting it up.
I have, for instance, VLAN 10 that it needs to be aware of, and this
network segment is
I have a server with a SuperMicro PDSMi motherboard, a Pentium D 930
proc, 3 GB of RAM and a 3Ware Escalade 8006-2LP RAID card. The array is
two Western Digital 80 GB drives, set as RAID 1.
When attempting a CD install of FreeBSD 6.3-RELEASE, the install goes as
far as this in debug mode before
Have you tried using -W on netstat? In certain displays, avoid
truncating addresses even if this causes some fields to overflow. I
tested it on my own IPv6 server after establishing a connection and
reproduced your behavior with the truncated IPv6 addresses; however,
once I added the -W flag, it
PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Wojciech
Puchar
Sent: Tuesday, September 11, 2007 9:28 AM
To: Mike Sweetser - Adhost
Cc: freebsd-questions@freebsd.org
Subject: Re: Best SCSI or SAS RAID for a NAS?
We're looking for opinions on what the best RAID controller would be
for
no RAID
We're looking for opinions on what the best RAID controller would be for
maximizing throughput on a drive array serving as a NAS using NFS. It
needs to be either SCSI based or SAS based.
Right now, we're using an LSI MegaRAID with 512MB RAM, which was the
best at the time, but we're experiencing
I'm having problems setting up tftpd on FreeBSD 6.2-RELEASE - our Cisco
routers cannot connect to the server, and only small files can be
uploaded.
Here's the line from inetd.conf:
tftpdgram udp waitroot/usr/libexec/tftpd tftpd -w
-l -s /home/tftproot
When TFTPing from a
I've been trying to get a server installed with FreeBSD 6.1 from either
a USB CD or floppy, or an NFS mount for nearly a week, with no luck.
(The server has no CD-ROM drive or floppy drive, and is SATA-only).
When trying to boot from the FreeBSD install CD from a USB CD-ROM drive,
or when booting
12 matches
Mail list logo
