oad at boot, the
kldload command loads it from the command line so you don't have to
reboot.
Aaron
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
his happens when sysinstall runs out of valid slice names.
> Try using less file systems per partition...
I figured it was because there were no free primary partitions (all free
space was in linux extended partition).
This was solved simply by
When I try to create a new slice, it gives it the name 'X' which causes
a problem when I try to create new partitions on that slice:
Unable to create partitons on device: /dev/X
I didn't see anything about this in the FAQ.
Anyone have any i
book is the best way to go. i just wanted to ask.
aaron
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
-snip-
>> Im assuming is supports ext3.
>
> Via ext2fs backwards-compatibility, yes.
The ext2 support that can be custom compiled into the freebsd kernel is
definitely sufficient to mount and read data from ext2 formatted
partitions. i have heard though, and perhaps someone on this list might
con
I prefer putting:
ScoreboardFile /var/run/proftpd.scoreboard
in /usr/local/etc/proftpd.conf, personally
and touching the file did seem to solve that particular error message for
me. However, this was not a particularly intuitive solution, and I'm not
sure why the port is set up to requ
On 18 Feb 2004 20:25:31 -0500
Lowell Gilbert <[EMAIL PROTECTED]> wrote:
> Aaron Sloan <[EMAIL PROTECTED]> writes:
>
> > Magick.xs:3557: warning: passing arg 1 of `Perl_newSVpv' discards qualifiers from
> > pointer target type
> > Magick.xs:3600: warning:
> i put a user in the operator group in /etc/group:
-snip-
> and attempted to dump a live filesystem:
-snip-
> what am i missing here?
nevermind. i had to log out and log back in. that solved me problems.
now my only question is why does one have to log out and log in for
addition to a new
i put a user in the operator group in /etc/group:
wkstn% pw groupshow operator
operator:*:5:root,alpete
and attempted to dump a live filesystem:
wkstn% dump -L -0u -f /mnt/storage/incoming/dump_test.dmp /usr
/sbin/mksnap_ffs: Permission denied
dump: Cannot create /usr/.snap/dump_snapshot: No suc
> The website for freebsd is www.freebsd.org and on the main page you can
> find the handbook which leads to www.freebsd.org/handbook
>
> --
> Alex
and of course the manual pages that install with each of the some 1
add on programs. "man "
___
[EMAI
have fixed with
help off this list.
Running an ATI Radeon card in case that helps...?
Thanks,
Aaron
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
> It does make for interesting analysis as a type
> of Freudian slip, though
i was able to resist the temptation myself, but i was just waiting for
somebody here to say it :)
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinf
> On Thu, 19 Feb 2004 16:19:25 +0100
> Benjamin Walkenhorst <[EMAIL PROTECTED]> wrote:
>
>> FreeBSD is very similar to windows, in many ways, from a user's point
>> of view.
>
> I'm sorry, FreeBSD is in not quite similar to windows. What I meant to
> say was: "very similar to Linux, from a user's p
ddress book was
infected and your email address got abused as a result. i have definitely
felt the pain of that over the last month, as i'm sure many others have.
i can't even avoid the pain of using windows by not using windows anymore.
i have to convince everyone i know not to use windows
Magick.xs:3557: warning: passing arg 1 of `Perl_newSVpv' discards qualifiers from
pointer target type
Magick.xs:3600: warning: passing arg 1 of `Perl_newSVpv' discards qualifiers from
pointer target type
Magick.xs: In function `XS_Image__Magick_ImageToBlob':
Magick.xs:4163: warning: passing arg 1
after the install, can i run a curses based slice/partition editor like
those used in sysinstall without actually running sysinstall?
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any m
/etc/rc.conf
> I am new to FreeBSD. I am evaluating it as a possible replacement for my
> in house desktops and ultimately a replacement for my redhat Internet
> server.
>
> I installed 4.9 without a hitch and decided to go ahead and install 5.2 in
> order to avoid potential upgrade issues mention
ning fbsd 4.9 with a generic kernel (minus cpu i386, 486, and 586).
Since i noticed this problem, i've rebuilt the world and the kernel,
rebuilt perl, and rebuilt irssi. no luck. i'm not sure what this error
means exactly, perhaps that information is key t
on rl1 can talk with 10.10.10.50 on em0, ARP traffic as
well as IP traffic. But the BSD host will never get ARP or IP traffic
to/from 10.10.10.100 on rl1. The BSD host can talk just fine to
10.10.10.50 on em0.
Anyone else have any ideas?
The system's running FreeBSD 5.2.1-RC2.
Thanks ag
ad with my
bridge a while back.
good luck!
Bjorn
Thanks!
That was it! I didn't even think to check this, since I was unaware
that it was set to 1 by default in 5.2.
Maybe I'll submit a patch PR for the bridge(4) man page to mention this.
Aaron out.
__
he deal? If this were a Cisco, this would be easy:
cisco(config)# arp aa.bb.cc.2 0011.22aa.bbcc arpa eth0
So what's up with FreeBSD? What magic incantation do I need to know?
Thanks in advance for any/all help/suggestions.
Aaron out.
___
[EMAIL P
lly ignorant. It can't find those hosts.
REQUEST FOR HELP:
-
Thanks in advance for all help, pointers, etc. If there's not a way to do
this, then this sounds like an issue that should be added to the BUGS section
of the bridge(4) man page.
Aaron out.
___
beyond what gq
requires.
- there are a few addressbook-like applications, which I haven't tried.
Here's one, rolodap, but I don't know if it's active or not. It
appears to have some association with mozilla's project site, mozdev.org.
http://www.google.com/search?q=ro
/usr/ports/mail/dbmail
Path: /usr/ports/security/p5-Crypt-xDBM_File
Path: /usr/ports/textproc/p5-XML-DBMS
--
Aaron
[EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
All,
I am having a issue getting my kernal to compile after adding the
following -
options IPSEC
options IPSEC_ESP
options IPSEC_DEBUG
I have also tried -
options FAST_IPSEC
This is on a FreeBSD 5.1 box, I get through the make depend and then when
I try to make it craps out here -
Apache is in the /usr/ports collection. For general use its best to use
one of those as it takes care of installing any libraries it needs into
/usr/local.
If you:
cd /usr/ports/www/apache2
make install
It will take care of everything. If you want to look at the sources then
look around the subdi
t with LAN remote power adapter". Looking at
the controller chip on the card, it is labeled AM 79C971KC,
PCnet/FAST+.
Any suggestions on how to make this work or how to get more diagnostic
info?
Thanks,
Aaron Burghardt
___
[EMAIL PROTECTED] ma
FreeBSD is a controlled complete through a console ( command line) interface,
I do not believe watching someone typing in commands a the prompt or text
editor will be very helpful. It is completely different then the graphical
interface of Windows which require the user to navigate the maze of
I not sure were pkg_add -r downloads the packages.
I have couple recommendations:
1. buy a full box set or download all four installation cd images.
2. install sysutils/portupgrade. This will automate the download off all
packages. You can install the binary version and its dependent packages
Hello
I would recommend creating a Fat 32 partion for transferring files between
FreeBSD and XP. This will work as long as you have not used all (four per
drive) of your primary partions.
> but when the instalation begun, I realized it couldn´t read mu NTFS drives
> so I thought the instalation
, and defines CLIENT_ONLY=yes
Building the client will run the Makefile in server, the overall port,
but only with client features.
Build server and you should get both, as server depends on client.
--
Aaron
[EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing
1:07 usb
crw-rw 1 root operator 108, 0 Nov 26 11:07 usb0
So, is that enough? Any suggestions, or requests for more
information?
Thanks.
--
Aaron
[EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
0 Nov 26 11:07 usb0
So, is that enough? Any suggestions, or requests for more
information?
Thanks.
--
Aaron
[EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
try turning off dma on the affected drive...see if it boots correctly
> At 21:40 -0500 12/01/2003, Aaron Myles Landwehr wrote:
>>I have the same problem with my asus p4s8x mobo on freebsd 4.9 and
>>priorIf i disable dma the cd will boot.;
>>5.1 works correctly(with dma
I have the same problem with my asus p4s8x mobo on freebsd 4.9 and
priorIf i disable dma the cd will boot.;
5.1 works correctly(with dma enabled).
from the cases i've seen...they all include an ASUS motherboard...
-aaron<[EMAIL PROTECTED]>
> I've got both 4.9 and 5.1 lo
abled.
2) Without DRI enabled, I cannot get the Neverwinter Nights linux client
to run.
I am currently running FreeBSD 4.8-RELEASE with XFree86 4.3.0. If any of
the above are untrue, I would appreciate some pointers as to where to
start. Thank you for your time!
--
Aaron Dalton
[EMAIL PROTECTED]
/stand/sysinstall
configure
Distributions
then select src
after that all the sources are in there. Just select what you want.
-aaron<[EMAIL PROTECTED]>
> At 12:03 PM 11/29/2003, Aaron Myles Landwehr wrote:
>>you can "/stand/sysinstall" to re-enter the sysinstall menu and i
you can "/stand/sysinstall" to re-enter the sysinstall menu and install
the src that way, or you can use cvsup.
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cvsup.html
btw heres a tutorial on cvsup if the handbooks to confusing(it isn't):
http://tutorials.snaphat.co
However, My NIC does not work with 4.x; thus, I am forced to use the
development branch of freebsd. And yes I do know the below.
-aaron<[EMAIL PROTECTED]>
> You do know that the 5.x versions of FBSD are the development
> versions. It is not uncommon to find bugs in the development
>
cmos setup..
-aaron<[EMAIL PROTECTED]>
> I have flashed BIOS to latest version - no change.
>
> A Google search located another person with the same computer and problem
> as
> I. His lockup was while installing RedHat Linux. I post a reply below:
>
> ---> The OS
Is that the reason why "make installworld" produces errors sometimes
during its execution in 5.1. And afterwards many commands coredump.
Needless to say requiring a complete reinstall.
should I do "make world" in such cases instead of "make buildworld" &
"m
When i first attempted to install freebsd via cds(4.8 annd 5.1)
My pc would hang on boot exactly like yours(at the same point). I
attempted to flash the bios on the pc with a newer version. After the
update i had no problems booting 4.8 or 5.1.
> I am attempting to install 5.1 on two identical IBM
What exactly does "make world" do?...i know sometimes i accidently type it
instead of buildworld
> On Nov 26, 2003, at 8:25 PM, Lowell Gilbert wrote:
>> "make world"? Really? You don't mean "make buildworld"?
>> I guess the "world" target really does need to be removed.
>
> Yes. Or fixed to
I was getting ready to install the automake and autoconf ports, when I
noticed there's 4 different versions of each. How do I know which ones
to install?
Thanks,
Aaron
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/lis
something with the headers, but why?
I especially don't understand why s_addr would not be a memer of struct
in_addr, because isn't that specified my POSIX?
Sorry for the long post and thanks.
Aaron
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
1/gdm, but there is no such directory. Is this config file
located elsewhere by default in FreeBSD?
Thanks,
Aaron
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
> check this out - I have a fbsd 4.6 box on my network, as well as a
> fbsd5.1 box and several XP boxes. I have a netgear router/firewall (also
> does dhcp and print server) box as well. The 4.6 box is set up on the
> network, the netgear dhcp server finds the box, as well as the 5.1 box,
> so
abled.
2) Without DRI enabled, I cannot get the Neverwinter Nights linux client
to run.
I am currently running FreeBSD 4.8-RELEASE with XFree86 4.3.0. If any of
the above are untrue, I would appreciate some pointers as to where to
start. Thank you for your time!
--
Aaron Dalton
[EMAIL PROTECTED]
Can someone tell me what I need to do to get FreeBSD Sparc 64 installed on
a Ultra Sparc 10. It seems as if the emulation is messed up. I have heard
of doing a serial install with a dumb terminal but cant find any
documentation on it. can someone point me to the correct place?
Aaron
> B F wrote:
>
> >Can someone just tell me step by step how to get my internet
> running starting from a FreeBSD clean install? I have spent days
> trying different things I've read on websites and books, but have
> yet to get it working. Thanks.
> >
> I'm new to BSD, but if it was Windows I'
Matthew Seaman wrote:
On Sun, Nov 09, 2003 at 07:15:09PM -0700, Aaron wrote:
Hmmm, I just noticed this in the debug output from slapd.sh
+ /usr/local/libexec/slapd -u ldap -g ldap
+ _return=1
+ [ 1 -ne 0 ]
+ [ -z ]
I tried running slapd as above from the command line and failed.
slapd should
ran this:
/usr/local/etc/rc.d/slapd.sh stop
and that worked.
So, the problem is related to slapd.sh running libexec/slapd with -u
ldap -g ldap, together with whatever configuration problems I have.
Looking into it.
--
Aaron
[EMAIL PROTECTED]
___
[EMAIL
I'm at my wit's end. It was a short trip.
I can start slapd directly, but not from the startup script slapd.sh and
therefore not automatically at boot.
Starting slapd directly works fine, and I can access the database:
[EMAIL PROTECTED] aaron]# ll /usr/local/libexec/slapd
-rwxr-xr
On October 31, 2003 04:04 pm, Kris Kennaway wrote:
> On Fri, Oct 31, 2003 at 04:00:41PM -0700, Aaron Dalton wrote:
> > These aren't ports, which is the problem :) I'm trying to compile
> > HawkNL (a c++ socket library) and a linux bandwidth monitor I use
> > on my L
On October 31, 2003 03:48 pm, Kris Kennaway wrote:
> On Fri, Oct 31, 2003 at 03:42:43PM -0700, Aaron Dalton wrote:
> > On October 31, 2003 03:11 pm, Kris Kennaway wrote:
> > > On Fri, Oct 31, 2003 at 12:15:03PM -0700, Aaron Dalton wrote:
> > > > I have been trying t
On October 31, 2003 03:11 pm, Kris Kennaway wrote:
> On Fri, Oct 31, 2003 at 12:15:03PM -0700, Aaron Dalton wrote:
> > I have been trying to compile some C++ socket code. I get the same
> > errors with multiple software packages so I'm thinking it's
> > something Fr
tax error before `u_int8_t'
/usr/include/netinet6/in6.h:638: syntax error before `u_int8_t'
loopback.c: In function `loopback_Read':
loopback.c:480: warning: implicit declaration of function `ntohs'
loopback.c: In function `loopback_WritePacket':
loopback.c:556: warning
ping, tracert, nothing... Is this new?
Shall I complain?
Aaron
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
next step in thinking? -verbose
Thanks!
Aaron
Making all in lib
Making all in libasprintf
make all-am
/bin/sh ./libtool --mode=link c++ -O -pipe -L/usr/local/lib -o
libasprintf.la -rpath /usr/local/lib lib-asprintf.lo autosprintf.lo
c++ -shared -nostdlib /usr/lib/crti.o /usr/lib/crtbeginS.o
> Hello,
> I followed this doc to install my firewall. Upon reboot I get
> about 12 lines
> more or less like this:
>
> ipfw: size mismatch (have 176 need..)
> It also says that dev tun0 doesn't exist.
Does the tun0 device exist after boot?
If so, I have faced a similar problem in the past.
an create "Emergency Disks"
that are bootable. So having DOS/Windows installed is not a requirement.
>
> --
> Rod
>
> @ Home So No Cool Signature
> http://opensourcebeef.bsd.st
>
Aaron Burke
[EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Hello Questions List,
(please cc, as I may not be on this list, (Too many daily messages))
I have previously setup a gif interface on a box called GM
using pseudo-device gif. I have tried several things to get the
gif interface back up and working. I will list them all in this
email. On an
f the checksum problem? I'm
not really interested in using NO_CHECKSUM=YES
I also removed /usr/ports/editors/openoffice and openoffice-devel and ran CVS again
with the same results.
Was my troubleshooting ok?
Tanks peeps!
Aaron Sloan
MIS
Northwest Iowa Alcoholism and Drug Treatment Unit, In
lly be nice if all this were
> done in the most perfect language, python;-)
I think you have python confused with ruby. ;)
But you don't have to build cvsup, just grab the package. It's not
something you'll really have any need to track updates on. If you do
I'm looking for a barcode reader for a bsd system. Need the peripheral,
and software to read it, from USB or keyboard or whatever interface is
appropriate.
Also same for CC swiper.
Anyone aware of these sorts of things for BSD?
--
Aaron
[EMAIL PROT
you
Aaron
[EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
I changed maxusers to be: maxusers256
That ended up with 8192 files.
There is probably a more direct way to set that )
On Tue, 2 Sep 2003 12:48:33 +0100, "Company 2210"
<[EMAIL PROTECTED]> said:
> I am trying to alter the number of maxsockets allocated from the default
> of
> 2022 to 8192
On Sun, 31 Aug 2003 12:44:11 -0700, Kent Stewart wrote
> On Sunday 31 August 2003 07:16 am, Aaron Dalton wrote:
> > Please excuse my ignorance. I cvsup'd my ports tree and used
> > portupgrade to upgrade everything but I can't get
> > XFree86-FontServer-4.3.0 o
rpath,/usr/X11R6/lib
/usr/libexec/elf/ld: cannot find -lXfont
*** Error code 1
Where is this library "Xfont" supposed to be? Thank you so much for
your time.
Cheers!
--
Aaron Dalton
[EMAIL PROTECTED]
http://aaron.finch.st
___
[EMAIL PRO
If you rm -rf /var/db/msyql then reinstall it doesnt work right now is
the problem... at least on freebsd. It gives the host.frm error the
poster asked about. Ive only been able to get a new system going by
restoring the mysql database (/var/db/mysql/mysql) from elsewhere.
On Fri, 29 Aug 2003 09:
Yeah I ran into that yesterday myself. The mysql_install_db doesnt leave
you with a working mysql database lately. What did to fix it was mysqld
-u mysql --skip-grant &
(Im assuming you have your mysql firewalled off, if not do that first ;)
At that point mysql is up enough to restore the mysql
cess so I can debug this
further?
Does any one know what fatal trap 12 is?
Regards,
Aaron
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Does anyone know the model number of a cheap hub to use when packet
sniffing? The two suposed hubs I have seem to be blocking packets not
addressed to me same as a switch would...
I'm trying tcpdump and ipgrab as root via a hub to listen to anouther
computer. The interface is going into promiscu
It doesnt use swap. It uses an area at the front of each vinum partition
to list the config. Thats so you can take all the disks out of the
machine and put them back in in any old oder and it works.
On Sat, 16 Aug 2003 17:51:14 -0500, "Hari Bhaskaran"
<[EMAIL PROTECTED]> said:
> Hi,
>
> I reins
Hello
If you have a connection to the internet you can install FreeBSD by
retrieving the distribution through ftp interface.
If you can find a solution on this mailing try posting to
[EMAIL PROTECTED]
Good Luck
On Thursday 14 August 2003 07:43 pm, zteknofreak wrote:
> i've been tryin
>
> >On a larger scale can i am tired of constantly changing dirs to run
> >apps. can i adjust an environment variable to run programs from any
> >dir i am in, instead searching through everything. I installed a lot
> >of port software but can't seem to be able to run or find any of it.
>
> thats
Hello
All you need to add support for you sound card is pcm remove the "device opl0
at isa? port 0x388" and try compiling the kernel.
On Wednesday 13 August 2003 07:29 pm, David wrote:
> I tried adding a driver for my onboard-soundcard Yamaha OPL-3-SAx on
> P200mmx, FreeBSD 4.7-Release.
>
> Afte
ound
it.
Has anyone else had this problem and found a satisfactory solution?
aaron
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Hello
The handbook does a good job cover this topic, please take a look at it
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/creating-cds.html
On Thursday 31 July 2003 06:25 am, marlon corleone wrote:
> how do i burn a directory using burncd
>
> i did burncd -f /dev/acd1 data mp3z fix
Hello Robert
I have been using FreeBSD 5.1 RELEASE and Konqueror without any noticeable
problems with speed or name resolution. The problem I have are related to
browser issue: not haveing support for shockwave, scripting problems, and
poorly develop sites that do not work well with the KHTM
ndows.)
The email address that is subscribe to the list is down, please forward the
message to this address.
Thank you
Aaron
P.S. I have posted the details of the problem just in case anyone else wants
to help out (It started as a simple port install problem).
Rommel Ikeda is unable to commun
Hello
Have you tried to using the XF86Config file from your Linux computer? You
will need to disable the dri stuff, make sure all the font paths are the
same.
On Sunday 27 July 2003 08:39 pm, Karl Agee wrote:
> >Date: Sun, 27 Jul 2003 19:15:57 -0700
> >To: "Greg 'groggy' Lehey" <[EMAIL PROTEC
ed, 10 packets received, 9% packet loss
round-trip min/avg/max/stddev = 168.518/173.873/185.511/4.737 ms
If you do not receive this response you have a network problem.
Reply to this email address [EMAIL PROTECTED]
Good luck
On Tuesday 29 July 2003 01:23 am, Rommel B. Ikeda wrote:
> Dear Aar
On Sunday 27 July 2003 10:26 pm, Rommel B. Ikeda wrote:
> Dear Friends,
>
> I do not know if this is the right place to ask but since I am a Newbie I
> thought I should start looking for answers here and maybe move on to
> wherever you might be able to guide me...
>
> I am trying to configure my sy
runs without
waiting for the user input.
I have included a copy of my dmesg output. It contains some ACPI error I do
not know if that is related or not. Any ideas?
Thank you
Aaron
I am runing:
XFree86-4.3.0,1 = up-to-date with port
XFree86-FontServer-4.3.0< needs updat
Berkely db is in the ports collection databases/db[2-4,41] and is free.
On Monday 21 July 2003 05:30 am, Martin McCormick wrote:
> I started to install spamprobe-0.8b and discovered that it
> needs something called BerkeleyDB. The instructions tell one to get
> it from a place called sleep
That seemed to work for me.
Thanks for the insight!
-Original Message-
From: Lukasz Ciazynski [mailto:[EMAIL PROTECTED]
Sent: Tuesday, June 24, 2003 10:52 AM
To: Schroeder, Aaron
Cc: '[EMAIL PROTECTED]'
Subject: Re: FW: closed stream message when attempting portupgrade
Schroe
- Original Message -
From: "Matthew Bettinger" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, June 23, 2003 11:24 AM
Subject: bsd video streaming
> Hello,
>
> Does anyone know off hand if there is a port that can assist in
> streaming mpeg or asf files from a web page (apache
I have a patch to /usr/ports/misc/amanda-clients. Its a one line change
to sendbackup-dump.c to add the L switch to snapshot for 5.x when making
a dump. Where do I put the patch so when I do make in
/usr/ports/misc/amanda-clients it gets applied? I checked the handbook
and porters guide... I don
Hello,
I originally sent this to ports, but I think questions is the proper group.
This is probably a trivial fix on my end, but I have never run into this
before. When I am trying to do a portupgrade -ra, or a pkgdb -F, I get a
"closed stream" message and then the portupgrade kicks me back to
7;re not interested in that.
I will give the very appropriate "three cheers for free" here :)
aaron
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
eme client to work with a
FreeBSD HostAP? Any Pointers? (Must I disable WEP (as useless as it may
be...)?)
Thank you,
~Aaron
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of John Fitzgibbon
Sent: Sunday, March 23, 2003 4:33 PM
To: Giorgos Keramid
> On Wednesday, 19 March 2003 at 22:06:45 -0500, Brian McCann wrote:
> > Hi all. I'd imagine this would be fairly simple since I got it to work
> > from Xmanager for Windows...but I'm having difficulties. I have 2
> > boxes, both BSD (one FreeBSD, one OpenBSD). The FreeBSD box has a full
> > blo
> I've got this spare machine, and I thought it would be perfect as a
> FreeBSD box to play with. It's a P-100mHz, with 32MB RAM, floppy, video
> card, two PCI NICs, 50X CDROM, 40GB Western Digital hard drive, and one
> IDE controller.
>
> However, I can't boot at all from any bootable FreeBSD
"Linksys WMP11 PCI Prism2.5"},
So, the qeustion is, can I make this (actually these 10) cards work with
FreeBSD? Any help or pointers on this would be greatly appreciated.
--Aaron
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
, but the
devices audio0.x, dsp0.x, dspW0.x do exist. Do I need to create the dsp,
audio, dspW devices? What does the statment"(4p/0r/4v channels duplex
default)" found in the output of the sndstat indicate?
Thank you
Aaron
d
To Unsubscribe: send mail to [EMAIL
I was writing a little test threads program, and when I try to compile I
get this:
$gcc -o mttest mttest.c -lpthread
/tmp/cco18ppz.o: In function `thread_func':
/tmp/cco18ppz.o(.text+0xd2): undefined reference to `pthread_detach'
I don't understand why I am getting this since pthread.h is include
, since I can't get this to work.
Thanks,
Aaron
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
> "Aaron Burke" <[EMAIL PROTECTED]> writes:
>
> > To my knowlege, yes. Lets say you had a server called www.
> > You would just give it two addresses in your domain configuration
> > files.
> >
> > www IN CNAME 12.34.56.78
>
> Does anyone know if there is a "simple" way to mirror two servers
> without spending $ on hardware? I'm NOT talking about mirroring the
> OS and the files, I'm talking about sending http requests to a second
> server if the first server is down/un-reachable. This is sometimes
> referred to as
301 - 400 of 453 matches
Mail list logo
