hello list,
when using the bootonly.iso from the ftp servers...
if you drop to a shell, use dhclient to obtain an ipaddress.. well you get
one.. but you have no DNS, because I think dhclient can't write to
/etc/resolv.conf
what is the correct way to fix this?
--
Sam Fourman Jr
On Jul 30, 2013, at 8:56 PM, Sam Fourman Jr. wrote:
hello list,
when using the bootonly.iso from the ftp servers...
if you drop to a shell, use dhclient to obtain an ipaddress.. well you get
one.. but you have no DNS, because I think dhclient can't write to
/etc/resolv.conf
what
hello all,
i want to change dhclient code and customize it. in order to do that, i
need to know the netmask for offered ip. i see code and found that struct
client_lease *offered_leases, keeps information about offered lease such
as ip address but this structure hasn't any field about netmask. i
Hi,
i want to change dhclient code and customize it. in order to do that, i
need to know the netmask for offered ip. i see code and found that struct
client_lease *offered_leases, keeps information about offered lease such
as ip address but this structure hasn't any field about netmask. i
,
i want to change dhclient code and customize it. in order to do that, i
need to know the netmask for offered ip. i see code and found that struct
client_lease *offered_leases, keeps information about offered lease such
as ip address but this structure hasn't any field about netmask. i don't
wireshark and check the contents of the dialog. I could
see that in the DHCP offer, there is an option field with holds the
netmask. I did not dig any further.
Olivier
On Mon, Jul 15, 2013 at 1:43 PM, Olivier Nicole olivier.nic...@cs.ait.ac.th
wrote:
Hi,
i want to change dhclient code
the
netmask. I did not dig any further.
Olivier
On Mon, Jul 15, 2013 at 1:43 PM, Olivier Nicole
olivier.nic...@cs.ait.ac.th
wrote:
Hi,
i want to change dhclient code and customize it. in order to do that,
i
need to know the netmask for offered ip. i see code and found that
struct
There are few things you should do.
First,
w/r to you complaint about first-kill-then restart, this will do it for you
/etc/rc.d/dhclient lagg0 restart
second,
I remember you wrote that you have a trouble with disconnects even in
wireless-only setup (no failover setup). If so, you should run
A follow-up:
third,
I would test with IPv6 disabled (entirely for the system), regardless of
connectivity type;
that also means to explicitly disable that failover setup line in your config
ipv6_activate_all_interfaces=**YES
jb
W/r to IPv6 (disable, enable, etc):
read man pages for
The thing very annoying, is that when my wireless disconnects, I must wait
until wpa_supplicant re-associate to the AP. Then I have no working
connection until I redo dhclient lagg0.
And running dhclient lagg0 will say dhclient already running.. So I always
need to kill it before. That issue does
On 30/11/2012 21:15, jb wrote:
David Demelier demelier.david at gmail.com writes:
Hi,
In my university, I have a WPA-EAP wifi access point, it requires
authentification to access, with dhclient, I'm disconnected randomly and
I must run wpa_cli reconfigure / dhclient again to get it working
David Demelier demelier.david at gmail.com writes:
...
Logs are your friends.
If the lease actually expires and you have to get a new IP (a new lease), then
you could have a temporary disconnect.
But if dhcp server(s) are working correctly the lease should be renewed or
rebound without
David Demelier demelier.david at gmail.com writes:
...
I have setup lagg0 for a failover with ethernet, (note the problem
appears if I use wlan0 only too)
# Fail over between wired/wireless.
cloned_interfaces=lagg0
ifconfig_msk0=up
ifconfig_ath0=ether 18:a9:05:87:38:0a
On 13/12/2012 23:39, jb wrote:
David Demelier demelier.david at gmail.com writes:
...
I have setup lagg0 for a failover with ethernet, (note the problem
appears if I use wlan0 only too)
# Fail over between wired/wireless.
cloned_interfaces=lagg0
ifconfig_msk0=up
ifconfig_ath0=ether
Hi,
In my university, I have a WPA-EAP wifi access point, it requires
authentification to access, with dhclient, I'm disconnected randomly and
I must run wpa_cli reconfigure / dhclient again to get it working.
I have never found a solution for that, so I tried for testing, to use
dhcpcd
and
cluttering up ifconfig(8) output -- unlike webcams, ethernet interfaces
generally do have kernel level support automatically enabled. devd will
try and run dhclient on the interface to configure it, which I guess is
where your extra dhclent invocation is coming from. It is possible to
turn this behaviour
On Sun, 6 May 2012, Matthew Seaman wrote:
On 05/05/2012 19:30, Carmel wrote:
All I guess I really have to get corrected is the dhclient thing,
assuming it is a real problem and just not some useless noise.
The 'dhclient already running' message is untidy, but harmless. It's
the rc system
On Sun, 6 May 2012 04:25:52 -0600 (MDT)
Warren Block articulated:
On Sun, 6 May 2012, Matthew Seaman wrote:
On 05/05/2012 19:30, Carmel wrote:
All I guess I really have to get corrected is the dhclient thing,
assuming it is a real problem and just not some useless noise.
The 'dhclient
.
This usually shows up with USB ethernet devices suddenly appearing and
cluttering up ifconfig(8) output -- unlike webcams, ethernet interfaces
generally do have kernel level support automatically enabled. devd
will try and run dhclient on the interface to configure it, which I
guess is where your extra
; however, I am assuming that the 8.3 version
somehow requires it.
I am still receiving an error message regarding dhclient. This is an
snippet of the screen logging at boot-up:
nfe0: link state changed to DOWN
Starting dhclient.
nfe0: no link nfe0: link state changed to UP
got link
DHCPREQUEST
Hi.
Problem is that my wireless card doesn't see any replies from DHCP
server when I use wpa_cupplicant (it works fine without encryption),
even tho it is associated with that access point.
So it looks like the encryption bit is working but then dhclient fails.
If I turn the encryption off
On 09/12/2010 02:51, Adam Vande More wrote:
On Wed, Dec 8, 2010 at 5:01 PM, Michaelmlmichae...@gmail.com wrote:
Again, other systems doesn't seem to have any trouble with getting IP from
this DHCP server and wired interface (em0) works fine too.
Any ideas please?
Your answer lies within:
On 9 December 2010 09:11, Michael mlmichae...@gmail.com wrote:
On 09/12/2010 02:51, Adam Vande More wrote:
On Wed, Dec 8, 2010 at 5:01 PM, Michaelmlmichae...@gmail.com wrote:
Again, other systems doesn't seem to have any trouble with getting IP
from
this DHCP server and wired interface
On 12/9/10, Michael mlmichae...@gmail.com wrote:
On 09/12/2010 02:51, Adam Vande More wrote:
On Wed, Dec 8, 2010 at 5:01 PM, Michaelmlmichae...@gmail.com wrote:
Again, other systems doesn't seem to have any trouble with getting IP
from
this DHCP server and wired interface (em0) works fine
On 09/12/2010 10:16, Paul B Mahol wrote:
On 12/9/10, Michaelmlmichae...@gmail.com wrote:
Ok it looks like PR number 145269. Unfortunately there is no fix yet.
Thank you for your help, at least I know it's not just me.
That PR is invalid/useless. If you want feedback give more.
You have
From owner-freebsd-questi...@freebsd.org Wed Dec 8 16:31:12 2010
Date: Wed, 08 Dec 2010 23:01:30 +
From: Michael mlmichae...@gmail.com
To: freebsd-questions@freebsd.org
Subject: dhclient doesn't work over wireless
Hello,
My FreeBSD laptop is unable to get IP address over DHCP
-CCM 2:128-bit txpower 20 bmiss 7 scanvalid 450
bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5
protmode CTS wme burst roaming MANUAL
But for some reason it doesn't get the IP address!
And whrn I manually try to: dhclient wlan0
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67
On Wed, Dec 8, 2010 at 6:01 PM, Michael mlmichae...@gmail.com wrote:
Again, other systems doesn't seem to have any trouble with getting IP from
this DHCP server and wired interface (em0) works fine too.
Any ideas please?
A question first, is this a VirtualBox VM? If so, you'll need to
On Wed, Dec 8, 2010 at 5:01 PM, Michael mlmichae...@gmail.com wrote:
Again, other systems doesn't seem to have any trouble with getting IP from
this DHCP server and wired interface (em0) works fine too.
Any ideas please?
Your answer lies within:
I did again the same build with include generic option and all binaries.
same results.
Did truss on the build host
Here is the result
truss /sbin/dhclient wlan-[K0
__sysctl(0xbfbfe5a4,0x2,0xbfbfe5ac,0xbfbfe5b0,0x0,0x0) = 0 (0x0)
mmap(0x0,328,PROT_READ|PROT_WRITE,MAP_ANON,-1,0x0) = 671764480
Hello,
I'm having an issue with dhclient on nanobsd.
It requests a lease and never exits
truss /sbin/dhclient vr0
__sysctl(0xbfbfe684,0x2,0xbfbfe68c,0xbfbfe690,0x0,0x0) = 0 (0x0)
mmap(0x0,328,PROT_READ|PROT_WRITE,MAP_ANON,-1,0x0) = 671698944 (0x28095000)
munmap(0x28095000,328
Hi all,
I've tried to get my freebsd diskless system to get hold of some of the
dhcp-options.
E.g. my dhcp-server will always be the nfs-server as well. So I was hoping
to create the /etc/fstab with the the dhcpd's ip as the nfs server.
Thus not needing to have the hard coded
On 22/03/10 21:35, Mats Lindberg wrote:
I've tried to get my freebsd diskless system to get hold of some of the
dhcp-options.
E.g. my dhcp-server will always be the nfs-server as well. So I was hoping
to create the /etc/fstab with the the dhcpd's ip as the nfs server.
Thus not needing to have
This alias IP can then be used within a jail(8) enviroment.
So far all is perfectly fine.
But in an enviroment where the primary IP is retrieved or set with DHCP by
using:
dhclient interface
How does one request an additional IP beside the primary one ..?
Setting an alias directly
Im trying to find out how i can change my net card on re0 to be a
10BaseT full duplex instead of auto @ 100.
Also trying to work out why when using dhclient fwe0 (presuming its
my wireless card) it never gets a link .. is there more to getting a
link with wireless? there is no encryption
On Mon, Aug 4, 2008 at 4:54 AM, Warren Liddell [EMAIL PROTECTED] wrote:
Im trying to find out how i can change my net card on re0 to be a 10BaseT
full duplex instead of auto @ 100.
I don't know, but someone else can probably help.
Also trying to work out why when using dhclient fwe0
trying to work out why when using dhclient fwe0 (presuming its
my wireless card) it never gets a link .. is there more to getting a
link with wireless? there is no encryption.
fwe0 is not your wireless card. fwe(4) is for ethernet emulation over
FireWire (aka ieee1394). (As clearly described
Hi list,
I finally managed to establish a PPTP VPN connection to my employer
using mpd5. My problem now is that in order for the setup to work
properly I need to supersede search domain and dns'es in
/etc/resolv.conf either by hand or by editing dhclient.conf. If I
use dhclient.conf the
quick question I can't seem to figure out
I have a FreeBSD 7 computer and I am having trouble with dhclient
here is my setup
Ethernet cable directly from fxp0 to a DSL Modem(that serves 192.168.0.x via
DHCP)
A wireless card(ral0) in hostap mode it has a static ip of 192.168.1.1. I
have dhcpd
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Sam
Fourman Jr.
Sent: Tuesday, June 10, 2008 3:08 PM
To: [EMAIL PROTECTED]
Subject: dhclient and dhcpd
quick question I can't seem to figure out
I have a FreeBSD 7 computer and I am having
is there an option in dhclient (or other program) to try getting IP
address but - don't set anything in system.
i mean something to just check for dhcp servers.
or maybe something that just detects what DHCP servers are available.
___
freebsd
On Monday 12 May 2008 18:34:32 Wojciech Puchar wrote:
is there an option in dhclient (or other program) to try getting IP
address but - don't set anything in system.
i mean something to just check for dhcp servers.
or maybe something that just detects what DHCP servers are available
-agent.sourceforge.net/man/dhcp-sniff.1.html
I haven¹t used it but I recall stumbling upon this a while back when I was
looking for the same.
If you try it out, let me know if it works.
-J
On 5/12/08 9:34 AM, Wojciech Puchar [EMAIL PROTECTED]
wrote:
is there an option in dhclient (or other
@freebsd.org
Sent: Monday, July 30, 2007 1:02 AM
Subject: Re: Binding dhclient to a particular network interface
The DHCP reference for ed1 means dhclient is started (thereafter running
continuously as a daemon), which sets ed1's IP address to that assigned
by
the cable modem.
Note that dhclient
Terry,
I tried adding the interface line to the dhclient configuration file (and
then rebooting), but it had no effect. Entering the sockstat -l4 command
showed that local address was still *:68.
I had a look at the man pages for the configuration file, but other than
trying again with the word
Jasvinder S. Bahra wrote:
Terry,
I tried adding the interface line to the dhclient configuration file (and
then rebooting), but it had no effect. Entering the sockstat -l4 command
showed that local address was still *:68.
man dhclient suggests that the interface needs to be specified
ideas?
Regards,
Jazz
- Original Message -
From: Chuck Swiger [EMAIL PROTECTED]
To: Jasvinder S. Bahra [EMAIL PROTECTED]
Cc: freebsd-questions@freebsd.org
Sent: Monday, July 30, 2007 8:25 PM
Subject: Re: Binding dhclient to a particular network interface
Jasvinder S. Bahra wrote
shows the interface having an
IP address of 0.0.0.0).
I do agree though - the man page explicitly says that this should work.
Does running dhclient ed1 from the command line work?
Is the DHCP server providing the right answer?
Running tcpdump -s 0 arp or port bootps would give you insight
Chuck,
Oddly enough, after the system has finished starting up, running dhclient
ed1 on the command line does work (though sockstat -l4 still shows local
address as *:68). I could I have sworn that when I tried doing this the
first time I added the dhclient_flags line, it failed.
One thing I
Jasvinder S. Bahra wrote:
Is there a way of instructing dhclient to listen only on the cable-modem
facing network interface?
Hi Jazz,
I don't find it necessary to run dhclient as a daemon. My server has two
interfaces, one wired and one wifi. In my /etc/rc.conf:
ifconfig_fxp0=DHCP
. This is
achieved by the following settings in /etc/rc.conf ...
network_interfaces=ed1 ed2 lo0
ifconfig_ed1=DHCP
ifconfig_ed2=inet 10.1.0.1 netmask 255.255.255.0
ifconfig_lo0=inet 127.0.0.1
The DHCP reference for ed1 means dhclient is started (thereafter running
continuously as a daemon), which sets
The DHCP reference for ed1 means dhclient is started (thereafter running
continuously as a daemon), which sets ed1's IP address to that assigned by
the cable modem.
Note that dhclient generally runs as a daemon because it has to handle lease
renewals and/or expiration. I have no issues
]
[mailto:[EMAIL PROTECTED] On Behalf Of Jasvinder S. Bahra
Sent: Monday, 30 July 2007 9:27 AM
To: freebsd-questions@freebsd.org
Subject: Re: Binding dhclient to a particular network interface
Adam,
Thanks for responding, but I think theres been a misunderstanding here.
The network setup on my
assigned by the DHCP server built into the cable modem.
If I run the following command at the command line...
sockstat -l4
I am presented with a list of IPv4 listening services. Unsurprisingly, one
of these services is dhclient. However, unlike some of the other services
listed, it seems
things that I could not get my FreeBSD
box(es) to do.
So I found out that this config file actually came from a linux box
(some ubuntu version) and that it runs a dhclient-script which I then
found out that FreeBSD also has..
So I'm closer but not there yet and can not seem to figure out
info
# pkg_info | grep bind
bind9-9.3.4 Completely new version of the BIND DNS suite with
updated D
FreeBSD-6.2
--- snip ---
Jun 11 07:17:10 hostname dhclient: Can't update forward map
bogus.domain.com. to 10.0.0.1: timed out
--- sinp
On Jun 11, 2007, at 11:48 AM, Noah wrote:
I recently added firewall filters to my home linux box, and now I
am experiencing named errors. I am running DDNS that sends out
updates for my dynamically assigned IP address for the router/linux
box at the edge of my home network. It appears
B. Cook wrote:
After reading way more about isc-dhcpd than I wanted to, I found out
that I can customize /etc/dhclient.conf (great). I found a great
dhclient.conf but it seemed to do things that I could not get my FreeBSD
box(es) to do.
I'm not quite sure what problems you're experiencing,
I'm in a LAN with a relatively short lease time. That wouldn't be a problem if
I wouldn't run a vpnc connection through this LAN. The vpnc connection sets
/etc/resolv.conf as required, but dhclient overwrites it every couple of
minutes, causing DNS not to work any more. Is there a way to make
On 1/26/07, [LoN]Kamikaze [EMAIL PROTECTED] wrote:
I'm in a LAN with a relatively short lease time. That wouldn't be a
problem if I wouldn't run a vpnc connection through this LAN. The vpnc
connection sets /etc/resolv.conf as required, but dhclient overwrites it
every couple of minutes, causing
I just built a new system as a firewall using FreeBSD 6.1-RELEASE-p11, IP
Filter V4.1.8 and am getting No DHCPOFFERS received. I am connected to the
internet via Comcast broadband. My old system running FreeBSD 4.6-RELEASE
and IP Filter V 3.4.29 works just fine. I plugged my external network port
Thanks for the response. That has fixed the problem.
-Original Message-
From: Doug Hardie [mailto:[EMAIL PROTECTED]
Sent: Monday, December 25, 2006 2:09 PM
To: [EMAIL PROTECTED]
Subject: Re: Problems running dhclient on 6.1
On Dec 25, 2006, at 13:06, Calvin Smith wrote:
I just
I have a FreeBSD 6.x machine with an ath interface that serves as a wireless
access point, dhcp server, router and gateway for my network.
I have a FreeBSD 6.x laptop with an older wi interface that until recently
was working just fine, using the base system dhclient. However, the other
day
If I run dhclient wi0 the lights on the card go out, dhclient reports
failure, and usually locks and reboots the machine.
I am not sure what information you need, but here is what I have and
what I have learned so far. I will gladly collect and post any info
that may help.
PCMCIA NIC card
Hi all,
My FreeBSD server at home is running natd and ipfw on 6.1-STABLE. So
it's the router and firewall for me at home. However, after a few days
the dhclient, used for obtaining an IP address from my ISP (and the
FreeBSD box gets that external IP address) gets into the giant lock
After updating to FreeBSD 6.1, this error is logged in /var/log/messages
every hour (every time dhclient runs, my ISP's DHCP lease time). After
googling, it seems like the option 0x51 is Client FQDN, fully qualified
domain name, but why is it an unknown option value to dhclient? How
can I tell
running rc under
xtrace? (I have done this in the past, it spews forth a great deal of
noise, but among the noise you may find what you are looking for.)
This has nothing to do with my script code.
This is how FreeBSD is handling the default dhclient-script that
comes pre installed on the system
Today I installed the isc-dhcp-client package.
It installs a completlly different dhclient-script.
One that looks like it matchhes what your begin/exit
scripts are designed to work with.
# base version
/etc/dhclient-exit-hooks
/etc/dhclient-exit-hooks.sav
/etc/dhclient.conf
/sbin/dhclient
/sbin
I installed the isc-dhcp-client port.
I have this in my rc.conf
dhcp_program=/usr/local/sbin/dhclient
dhcp_flags=-q
ifconfig_dc0=DHCP
I get these error messages over and over.
Have to reboot in single user mode to edit rc.conf to fix.
Can't bind to dhcp address: Address already in use
Please
On Thu, May 04, 2006 at 10:41:05AM -0400, fbsd wrote:
Today I installed the isc-dhcp-client package.
'K. Hope you have better luck. I have never used it, so don't know
anything about it.
I think this is another indicator of a bug with the base dhclient
and
that this bug makes the pkg
: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Norbert
Papke
Sent: Tuesday, May 02, 2006 9:47 PM
To: [EMAIL PROTECTED]
Cc: freebsd-questions@freebsd.org
Subject: Re: dhclient-exit-hooks
On Tuesday 02 May 2006 06:12, fbsd wrote:
IF I execute the cat command to issue the notification email
: freebsd-questions@freebsd.org
Subject: Re: dhclient-exit-hooks
On Tuesday 02 May 2006 06:12, fbsd wrote:
IF I execute the cat command to issue the notification email
from the command line it works fine, but when used in the
script I get these messages during boot process.
I am
What goes in your_script_service?
Is it suppose to be script name dhclient-exit-hooks?
Is the # comment char to be removed?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Daniel Bye
Sent: Wednesday, May 03, 2006 11:42 AM
To: freebsd-questions@freebsd.org
On Wed, May 03, 2006 at 12:17:00PM -0400, fbsd wrote:
What goes in your_script_service?
Is it suppose to be script name dhclient-exit-hooks?
Yes. Sorry, hadn't been paying due attention, otherwise I
would have put 'dhclient-exit-hooks' ;-)
Is the # comment char to be removed?
No - leave
Added this and still no joy.
# PROVIDE: 'dhclient-exit-hooks'
# REQUIRE: SERVERS
As a side bar. This problem started in 6.0 I think.
I only ran 5.4 for short time before going to 6.0
But I do know I did not have this problem in 3.x and 4.x versions.
-Original Message-
From: [EMAIL
On 5/3/06, fbsd [EMAIL PROTECTED] wrote:
I changed #! /bin/sh to #!/bin/sh it had no effect.
Logger command still not producing output.
using sendmail to construct the email made no difference.
Still get this message
/libexec/ld-elf.so.1: Shared object libpcre.so.0 not found,
required by
On Wed, May 03, 2006 at 12:52:07PM -0400, fbsd wrote:
Added this and still no joy.
# PROVIDE: 'dhclient-exit-hooks'
# REQUIRE: SERVERS
I'm sure it won't fix the problem, but you shouldn't include the quotes
around the term for # PROVIDE:.
Also, I think the rcorder block needs a blank line
There is nothing to rebuild.
I am using the built in dhclient that comes with the system.
-Original Message-
From: Atom Powers [mailto:[EMAIL PROTECTED]
Sent: Wednesday, May 03, 2006 1:05 PM
To: [EMAIL PROTECTED]
Cc: Norbert Papke; freebsd-questions@freebsd.org
Subject: Re: dhclient-exit
On Wed, May 03, 2006 at 02:25:08PM -0400, fbsd wrote:
There is nothing to rebuild.
I am using the built in dhclient that comes with the system.
But it's not dhclient that's emitting the error, is it? It's your MTA.
(check in /etc/mail/mailer.conf, and you will see that send-mail is
an alias
: link state changed to UP
DHCPACK from 10.0.10.2
dc0: link state changed to DOWN
bound to 10.0.10.4 -- renewal in 43200 seconds.
and here is the dhclient-exit-hooks script
#!/bin/sh
# PROVIDE: dhclient-exit-hooks
# REQUIRE: SERVERS
### Start of refresh dhcpd dns ip
state changed to DOWN
bound to 10.0.10.4 -- renewal in 43200 seconds.
and here is the dhclient-exit-hooks script
#!/bin/sh
# PROVIDE: dhclient-exit-hooks
# REQUIRE: SERVERS
### Start of refresh dhcpd dns ip
# This script will propagate to dhcpd
and or when during the boot
process the script is getting executed.
This has nothing to do with my script code.
This is how FreeBSD is handling the default dhclient-script that
comes pre installed on the system.
The recorder directives have made no difference.
Please note I am not using the isc-dhcp port
fbsd wrote:
When this script runs the logger statements do not create any
message in the targeted log files.
IF I execute the same logger statements from the command
line they work as expected.
Hi,
Forgive my ignorance if it turns out I'm totally off track here
but do you need a line in
[mailto:[EMAIL PROTECTED]
Sent: Wednesday, May 03, 2006 6:50 PM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED] ORG
Subject: Re: dhclient-exit-hooks
fbsd wrote:
When this script runs the logger statements do not create any
message in the targeted log files.
IF I execute the same logger statements from
to /var/log/dhcpc.log to document event.
logger -p user.warning -t dhclient Your ISP DNS IP addresses
changed.
# Write message to /var/log/dhcpd.log to document event.
logger -p local1.warning -t dhclient Your ISP DNS IP addresses
changed.
# Send notification email to root user. This can wrap
On Tuesday 02 May 2006 06:12, fbsd wrote:
IF I execute the cat command to issue the notification email
from the command line it works fine, but when used in the
script I get these messages during boot process.
I am running postfix launched by the sendmail wrappers
on a FreeBSD 6.0 system.
)?
'man dhclient' should work fine.
FBSD 6 uses the OpenBSD dhclient (which I believe derive from an older
version of the ISC one.)
Hi,
Yes, man dhclient in FBSD 6 does work fine. I misinterpreted
how to apply its instructions.
Duane
key string deftxkey 1
From reading of the ifconfig man page I thought that was the default. Many
thanks to Robert Watson for the right answer. I did not have a dhclient.conf in
5.3 or 6.0.
In general - it may not be dhclient, you may need an addition module or some
additional setting
network is a FreeBSD
(6-Stable). This FreeBSD PC runs dhclient to get its
IP configuration. So far so good.
All other PCs on the network are Windows PCs,
but have a BIOS that allow Network boots.
Therefore I would like to set up the possibility to
boot these PCs as diskless boxes
). This FreeBSD PC runs dhclient to get its
IP configuration. So far so good.
All other PCs on the network are Windows PCs,
but have a BIOS that allow Network boots.
Therefore I would like to set up the possibility to
boot these PCs as diskless boxes from the
FreeBSD PC, using
make stuff up wrote:
hi all..
this is new - just installed 6 and here:
# dhclient fxp0
DHCPDISCOVER on fxp0 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on fxp0 to 255.255.255.255 port 67 interval 8
Erik Norgaard writes:
- Do you use a dhclient.conf from your previous install? These
are incompatible. The new dhclient is a port from OpenBSD who
completely rewrote dhclient. The old is from ISC.
I do not believe this to be correct - the part about
incompatible config files
Robert Huff wrote:
Erik Norgaard writes:
- Do you use a dhclient.conf from your previous install? These
are incompatible. The new dhclient is a port from OpenBSD who
completely rewrote dhclient. The old is from ISC.
I do not believe this to be correct - the part about
hi all... again...
i sent this message to general questions but nobody got excited about
it.
i just installed 6 on my t30 laptop. brand new. when trying dhclient i
get:
DHCPDISCOVER on fxp0 to 255.255.255.255 port 67 interval 5
this trys 6 times then this shows up:
No DHCPOFFERS
On Fri, 3 Feb 2006 06:10:18 -0500 (EST)
make stuff up [EMAIL PROTECTED] wrote:
hi all... again...
i sent this message to general questions but nobody got excited
about it.
i just installed 6 on my t30 laptop. brand new. when trying
dhclient i get:
DHCPDISCOVER on fxp0
on the laptop and travel a lot
i thought 6 has been out for a while now i mean stuff like dhclient
is pretty basic..
thanks again...
Cheers,
Marcin.
PS. [EMAIL PROTECTED] and freebsd-questions@freebsd.org is the same
list. The first one has this name becouse of compatibility
2006/2/3, make stuff up [EMAIL PROTECTED]:
thank you... does that mean back to 5.4 for now?
Try install /usr/ports/net/isc-dhcp3-client/
--
Cris, member of G.U.F.I
Italian FreeBSD User Group
http://www.gufi.org/
___
freebsd-questions@freebsd.org
2006/2/3, make stuff up [EMAIL PROTECTED]:
thank you... does that mean back to 5.4 for now?
Try install /usr/ports/net/isc-dhcp3-client/
without a connection?
--
Cris, member of G.U.F.I
Italian FreeBSD User Group
http://www.gufi.org/
try install /usr/ports/net/isc-dhcp3-client
and edit your rc.conf:
dhclient_program=/usr/local/sbin/dhclient
dhclient_flags= see manual for isc-dhcp3-client
2006/2/3, Frank Altpeter [EMAIL PROTECTED]:
Hi there,
kalin mintchev wrote on 2006-02-03 at 13:55:01 CET:
2006/2/3, make stuff up
On Fri, 3 Feb 2006 14:02:41 +0100
Frank Altpeter [EMAIL PROTECTED] wrote:
Hi there,
kalin mintchev wrote on 2006-02-03 at 13:55:01 CET:
2006/2/3, make stuff up [EMAIL PROTECTED]:
thank you... does that mean back to 5.4 for now?
Try install /usr/ports/net/isc-dhcp3-client/
1 - 100 of 260 matches
Mail list logo
