Jonathan Chen wrote:
> To unzip ZIPs, you need to install archivers/unzip. To unzip RARs, you
> need to install archivers/unrar.
The new bsdtar (by way of libarchive) can read zip files quite nicely.
At least most of them, in my experience. According to the man page
libarchive-formats(5):
Zip
I'm being driven slowly mad by cvs...
I have 3 boxes, one is acting as a cvs server. The "cvs clients" (for
lack of a better term) are running 6.1 and should be configured the
same. Yet, one machine lets me do a cvs login, the other requires I
use cvs -d :psserver:.. with each cvs command.
I d
Hi all,
I have installed dummynet on a machine-2 which I am using to introduce delay
between the packets that I'll be sending from machine-1 to machine-3.
I am using ping to confirm that ICMP/TCP packets are getting delayed. I know
both UDP/TCP fall under ip, so UDP packets should also be getting d
Google for custom modeline. Here is a generator.
http://xtiming.sourceforge.net/cgi-bin/xtiming.pl
Best regards,
2006/9/29, Дмитрий Ефремов <[EMAIL PROTECTED]>:
Hello! I have one question. I had installed Free BSD 6.1 and i use
GNOME.My monitor is Philips 107p5 and i want to have 100
On Friday 29 September 2006 05:13, Дмитрий Ефремов wrote:
> Hello! I have one question. I had installed Free BSD 6.1 and i use GNOME.My
> monitor is Philips 107p5 and i want to have 100 Hz at 1024x768. I wrote the
> characteristics of my monitor to xorg.conf,but it doesn't switch to
Hello All,
Well, I have FBSD 6.1-R server acting as NAT, and wired Internet HotSpot
by chillispot and freerad
for a building of 66 rj45 wall socket.
The problem is, whenever someone having an internet account, he is able
to give it to his friends
to connect in the time he is not conn
i made a script and put on root's crontab, however it's not doing or showing
the output that is forwarded to my email address correctly therefore i'm not
sure if it is working or not. below is what the script look like:
#
# cvsrun - Weekly CVSup Run
echo "Subject: `hostname` week
I have a question regarding ipf and ipnat. I have a firewall with two
public IP addresses. One of the IP addresses is for incoming Internet
traffic only and the other is for incoming e-mail. I'm not sure why my
ISP has done, this, but they have.
In otherwords, all incoming http traffic
There are two installation CD's for FreeBSD 6.2. After booting the
first one, and requesting ALL packages and ALL ports, the installation
seems to go ok until the end when it complains that it cannot find the
requested package on the media from which installation is being made.
At no point do
hi,
i been using portmaster for a while when upgrading my ports, often
times when there are some problems in certain ports, e.g. jdk, i will
use "-x jdk" so i can deal with it later. but when there are two or
more of them that need special attention, i cant find a way to do it
right, i tried "-x
Hi,
This is the result of running 'portsnap fetch' tonight:
Looking up portsnap.FreeBSD.org mirrors... 4 mirrors found.
Fetching snapshot tag from portsnap3.FreeBSD.org... done.
Fetching snapshot metadata... done.
Updating from Fri Oct 5 16:39:29 CDT 2007 to Wed Nov 7 17:22:07 CST 2007.
Fetchin
Hi,
I wonder if just having port-all is enough in cvsupfile as follow. If I
just want to keep ports tree up to date, do I really need to have
'"src-all"?
*default host=cvsup9.freebsd.org
*default base=/usr
*default prefix=/usr
*default release=cvs tag=RELENG_4_11
*default delete use-rel-suffix c
Gaston Rey <[EMAIL PROTECTED]> wrote:
>
> Hi all,
> I need to know how to migrate a HD from my actual Server to another
> recently made up. This HD has the base operating system and i want to
> move up it to the other server but surely it'll carry up a kernel panic
> error :s
Please wrap your
On Sun, 16 Dec 2007 08:32:04 -0800 (PST)
Gaston Rey <[EMAIL PROTECTED]> wrote:
> Hi all,
> I need to know how to migrate a HD from my actual Server to another
> recently made up. This HD has the base operating system and i want to move up
> it to the other server but surely it'll carry up a
On Monday 17 December 2007 04:27:03 Norberto Meijome wrote:
>
> FBsd isn't windows - go ahead and do it - if u can get the new HD and hook
> it up to the old box, go into single user mode , partition the new disk as
> you wish, mount each partition at a time and transfer the data.
I understood t
Ladies and Gentlemen,
I want to check the understanding of jails.
My understanding is a jail uses the existing kernel configuration and
cannot use its own kernel configuration.
Is this correct?
Thanks,
Jay
___
freebsd-questions@freebsd.org mailing
Hello
I am Polish FreeBSD system administrator, I would like to participate
in the course and get a certificate of achievement of FreeBSD system and
in the future, if possible, I would like to become a trainer of FreeBSD.
What do I have to do to get a certificate of an administrator and how
ca
Guys,
my network guy suggests this is ONE way of creating a
.spamassassin file. Is there a better way than this:
mkdir /root/.spamassassin
chmod 775 /root/.spamassassin
chown root:spamd /root/.spamassassin
what's the consensus, mail gurus
this may be offtopic but it does deal with our OO.org port.
a friend sent me a very nice "slideshow" in powerpoint format. I've
saved it (and the original) somewhere in the evolution directory so all
the photos are safe. first question is
Hello everyone,
I've got MPD5 working on FreeBSD 8, i just got one question.
When i add a user in mpd.secret and restart mpd with
/usr/local/etc/rc.d/mpd5 restart, the user can login.
But there is also a drawback, all currently logged in users get disconnected.
Does anyone know if there is
Hi, all:
How could I use vi to repeat a word, say, 100 times in the same line, of course
with a space in between?
Thanks in advance
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To u
hi all..
got skype installed. can't get sound of off it. when i talk people hear me
but i can;t hear rings. sound works fine otherwise - i can listen stuff
with xmms.
in the skype options for hand/headsets the Ringing points to /dev/dsp
same as Calls one but the one for ringing is dimmed and i ca
ive been using 'portupgrade -apP' on my systems lately (since i keep a central
repository of packages i build for my systems; a good bulk of them are used
across most/all of them).
in situations where new packages are built from ports (ie, when the package
in /usr/ports/packages/All is no lon
Can I download your software from the web? I can't find a link.
_
PC Magazine’s 2007 editors’ choice for best web mail—award-winning Windows Live
Hotmail.
http://imagine-windowslive.com/hotmail/?locale=en-us&ocid=TXT_TAGHM_migration_
I am currently on the last stages of setting up a FreeBSD 6.2-STABLE
File and Network Application Server. One of my last tasks is to simple
forward all mail from root out through my isp's SMTP(requires
authentication) server and to an email account i have elsewhere. That is
to say i have no pur
Hi (and sorry for this slightly OT question),
I would like to extract the second last field of each line of a
file called user.csv .
So I try
> awk '{print $(NF-1)}' user.csv
awk: trying to access out of range field -1
input record number 1, file user.csv
Hi
What I want to accomplish is a DMZ on the third ethernet on my
soekrisbox. I have done this before with OpenBSD and PF but now I
want to do it with FreeBSD and ipfw. My isp uses dhcp but they
don't change my ip so very often (almost never) so you can see it
like I have a static ip. First the ipn
Hello,
I've partitioned my HD into 3 partitions.
One is currently running FreeBSD6.2, the second has my data files (home
directories).
On the third I would like to install FreeBSD-current to play around a bit and
get more familiar
with the OS.
Is it possible after the installation of current o
Hello,
I've just CVSupped my ports collection and run 'portupgrade -ra'. One
of the ports that was updated was vim, which had originally been
installed without X11:
# cd /usr/ports/editors/vim
# NO_GUI=1 make install clean
Now, this option appears to have been lost as I've ended up with a f
I use wpa_supplicant and have set the 'ifconfig_ndis0="WPA DHCP"' in my
/etc/rc.conf. However I am using the NDIS driver, so how do I pass the "-Dndis"
argument to the wpa_supplicant?
Thanks
--
Free pop3 email with a spam filter
Over the weekend in trying to build xorg and kde from packages, none of the
various options for the package tree seemed to work. Plus the meta port for kde
was not available.
If one goes to /pub/FreeBSD/ports/i386/packages-6-stable/kde (1)
/pub/FreeBSD/ports/i386/packages-6.2-re
I'm trying to do some text file manipulation, and it's driving me nuts.
I've got a sorted file of SMTP addresses, and want to eliminate the
lines that are the same up to a space character within the line.
Example:
[EMAIL PROTECTED] NO
[EMAIL PROTECTED] OK
The above lines *both* need to be elimi
ive installed xorg-nestserver-1.2.0,1 on another local-lan computer, and im
trying to attach to it using different versions of examples im finding around
the net, but so far no joy. im trying to start a desktop session from the
other computer to my desktop, in a new window.
does anyone have ex
Hello list,
I'm playing with a small nasm executable, is there any way
i can get gdb to show me the deadlisting, and allow me to
break at a certain offset, without any debugging symbols?
Since my code is raw assembly, seeing the sourcecode file
or the deadlisting is the exact same.
Atm i'm doing
Hi,
I was at your website and wanted to know how to be added onto your "Hardware
Vendor?" We are a system integrator that also installs the software.
Your site page : http://www.freebsd.org/commercial/hardware.html
Please let me know! Thank you.
Sincerely,
Li Liu
(Rackmount Server Solution
My earlier post about deleting the first N lines was answered by
this one-liner site {below}. I wasn't including any
redirection; doing so finally resolved the problem. Now I need
to delete every line from the 19th or so to the last line.
Questio
I use SSH to remote FreeBSD
$ssh [EMAIL PROTECTED]
password:
Then I SSh to suspend client in that remote machine:
$~
/home/tom: Permission denied
Permission denied? Why? How to do that?
--
Confidentiali
Dear all,
I am trying to use logrotate from ports and I am getting the following
error. Can anyone offer any insight?
/usr/local/sbin/logrotate -d /usr/local/etc/logrotate.conf
reading config file /usr/local/etc/logrotate.conf
reading config info for /var/log/httpd-error.log
error: /usr/local/
There is a server and a clinet,the use TCP and port is ,server and client
is the same machine. I use following step:
1.client send a "hello" to server
2.server return a "hello" to client
3.stop client
4.stop server
I use tcpdump to watch tcp package,result is follows:
15:47:15.875447 IP (tos
People,
This ought to be On Topic ... for a change. Re the use of bluefish
--and yes, I've finally gone soft to try to edit a large HTML/PHP file--
when I swipe an area of text and stuff to be centered, and click on the
center icon, bluefish prints:
blah
foo
bar
but I find the entire file cen
Hi all. I have a question about cron jobs that seem to be running to long or
with multiple copies of itself. For example, I have a backup script that I
run that seems to make multiple copies of itself. If I view the running
processes I see numerous instances of the same cron job. Is there
I'm just starting to play around with pf to get it to handle NAT for
a LAN, and I've just discovered that I don't know how to get pf to reload
/etc/pf.conf after I make changes to it. "pfctl -d -e" doesn't do it, and
neither does "pfctl -d; pfctl -e". Is there a way to do it besides rebootin
Hi guys,
Just wondering if i can have like a "central" ident server on my
LANthats cause my boxes are behind A NAT so i can only forward
identd requests to oneand i mean like a fake one..cause the
process may be on one of the other boxes that require de ident, is
clear?...i read about fake
I am trying to move a couple of machines from Suse Linux to FreeBSD and I am
having an installation issue on the first machine. I have a 1.8GHZ Pentium
on an ASUS mainboard. DUring installation I give the geometry of the drive
on the machine, a Western Digital WD8000JB, the drive geometry that I
Over the past four days I've managed to get my FreeBSD server running
KDE
up by installing kde4. Now, for some reason, konqueror fails to
conntect
anywhere.
How can I free up my old kde3 files and get konqueror working again?
gary
--
Gary Kline [E
Dear mailing list,
What are the steps to bring back gconcatenated disks if doing an upgrade
from FreeBSD6 to FreeBSD7 like this?
As-is situation:
FreeBSD 6.2-STABLE ad0 has FreeBSD ad1, ad2 and ad3 are gconcatenated
using 'gconcat label -v data /dev/ad1 /dev/ad2 /dev/ad3'.
Planned upgrade:
Rebo
Hello,
I have inherited an old FreeBSD 5.1 machine(5.1-RELEASE-p18). I realize
that the short answer to my question is more than likely to upgrade the
OS to a current release and I would if I had that option right now, but
I do not. I needed to upgrade the perl/openssh/openssl implementation
the main reason i don't use vim is because of its [u]ndo
command. as most of you can understand, there are a whole slew
of times when i need to undo something. too often in vim,
hitting 'u' --- sometimes > once accidentally --- has resulted in
a small dis
On Tue, 07 Jul 2009 01:46:45 -0400
DJ Lawless wrote:
> Do you need to become a member of freeBSD to get a freeBSD.org email
> address?
>
> if yes how do you become a member?
If you have to ask, it's not going to happen.
___
freebsd-questions@freebsd.o
In response to DJ Lawless :
>
> Do you need to become a member of freeBSD to get a freeBSD.org email address?
Yes.
> if yes how do you become a member?
Make enough contributions to the project that you get noticed and you'll be
invited.
--
Bill Moran
http://www.potentialtech.com
http://people
Hello,
yesterday, having to install kdeadmin, I issued the following command
portupgrade -vnyNb -l file kdeadmin-3.5.10
Noting that "n" is negated by "y" (my mistake), the result of this command was
+ print/cups-base
+ print/xdvik
+ print/cm-super
+ prin
On Fri, 17 Jul 2009 10:51:57 -0700 (PDT), Zohreh wrote:
> Dear Sir/Madam
>
> i have a question about free bsd and squid that was installed on it.
> i insatlled squid 2.6 stabled 20 on freebsd 7. and i enabled firewall
> on freebsd . now i brows http sites on internet but i can
On Fri, Jul 17, 2009 at 10:28:16PM +0300, Giorgos Keramidas wrote:
> On Fri, 17 Jul 2009 10:51:57 -0700 (PDT), Zohreh wrote:
> > Dear Sir/Madam
> > ?
> > i have a question about free bsd and squid that?was?installed on it.
> > i insatlled squid 2.6 stabled 20 on freebs
On Fri, 17 Jul 2009 10:51:57 -0700 (PDT)
Zohreh wrote:
> Dear Sir/Madam
>
> i have a question about free bsd and squid that was installed on it.
> i insatlled squid 2.6 stabled 20 on freebsd 7. and i enabled firewall
> on freebsd . now i brows http sites on internet but i can
I am sure this is something I am doing that is obviously wrong, but I
cannot figure it out.
I am reading a list of directories from a file, and then listing all
of the files in the directory to a file.
Here is the code.
#!/usr/local/bin/bash
cat ${FILELIST} | while read LINE
Good morning.
I have been asked by my co-workers and sales why I always create a A
record for new domains we host instead of a CNAME.
The issue I run into lately with some domains is that a client has a
website with a industry host such as frank.relator.com and he wants to
have DNS point www
ssiopeia# telnet 192.168.0.132 5900
Trying 192.168.0.132...
Connected to 192.168.0.132.
Escape character is '^]'.
RFB 003.008
^C
^CConnection closed by foreign host.
cassiopeia#
Question: what is wrong with this confing? What should I change if I
want to access LAN2 from
Hello, i have a question about licensing FreeBSD: i would be like install
freebsd in corporation on workstation (don't servers). Its free ? Or FreeBSD
free for individual using ?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebs
I'll try again to submit a question. Please see the attached.
Jerry
Attachment is a copy of the message.
--- Begin Message ---
Newbie question here.
I've followed the installation instructions in the book FreeBSD 6
Unleashed and (finally) gotten it install
Well,
maybe I spoke to soon. While looking at dmesg in prep for doing
a custom kernel for my new server, I noticed an oddity.
ad4 - DMA limited to UDMA33, device found non-ata66 cable.
ad4 -
Is this telling me the system recognized my
160GB 7.2K RPM Serial ATA 3Gbps 3.5-in Cabled Hard Drive as
it's a stupid little question really but I have an xterm filled with a
log file (telnetted into another machine) which is scrolled off the
screen. How do I select all the text in one go? I only seem to be able
to select the visible screenful, copy, paste into text file, scroll up,
selec
Chris Whitehouse writes:
> it's a stupid little question really but I have an xterm filled
> with a log file (telnetted into another machine) which is
> scrolled off the screen.
If you can telnet, can you ftp?
Greetings,
I am looking to install a CMS system (something like postnuke) and want to
have a blog component.
Anybody have any recommendations ? If it is in the ports, it would be even
better.
thanks,
Darryl
___
freebsd-questions@freebsd.org mailing lis
Hi
Can you suggest us, what kind of servers are supported to run if Free Free BSD
6.2?
HP? Dell? ]IBM?
Could you suggest a model of this servers and processors please?
Thanks
Odeth Verónica Solano P.
Clientes Estratégicos
Diveo Internet de México
Tel.: 5093-8058
Cel.: 04455-5506-3474
E-mail: [
Hello,
I am building the DNS Server,But I can't find the script
"/etc/namedb/make-localhost" used in the document, So I can't go on now? Please
tell me how to find the script,Thank you very much!
Best Regards!
Freebsd Lover:Erik
___
freebsd-questi
I am in the process of moving my phone system DHCP from my Mitel 3300 to a
FreeBSD so I can parse the DHCP file. In order to make Mitel's option 125
work correctly, I have to specify some vendor specific options. I believe
this is option 124 if I understand the Mitel documentation correctly.
I h
Hello, how can we have a pop mail with domain FreeBSD.org ?
cheers
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Hi,
I recently did a binary upgrade from 6.2-RELEASE to 6.3-RELEASE and
everything went smoothly. For good measure I decided to do an upgrade of
all of my installed ports with the following command:
sudo portmaster -Rfda
It quit out when failing to build the ImageMagick port which is fine,
Hello list,
I have 3 external USB hard disks hooked to my server, serving media
files via NFS, SSHFS and samba to my local network, laptops and
Playstation 2, the sizes of these hard disks are 160Gb, 500Gb and
750Gb, the 160Gb has no space left, my archive of Movies is on it, the
500Gb will soon r
Hi all;
Quick newbie question.
I've been out of the bsd loop for a bit, i'm trying to setup nagios which is
fine
There are a couple of settings that I either don't remember or never
remembered and forgot that I never knew it.
Ok so nagios is asking me for an rc.d p
I'm trying to keep all FreeBSD servers in my net as I have since the
late 90s. I have a requirement to get a quickbooks enterprise server
running so I was going to attempt to use compat_linux.
It struck me that if I knew the following list of supported linux
implementations, I should be able to f
Usually I'm asking questions for work related things. This one is more
personal.
My father has this tendency to end up wrecking his computer if he uses
the Internet
much. Computers are basically magic boxes to him, so education is of
limited usefulness
here.
I'm thinking I might be best of t
how can i delete, say, lines 8,9,and 10 from 200 files
using sed? Is it
sed '8,10d'< file> newfile
or is there a better way?
tia,
gary
--
Gary Kline kl...@thought.org http://www.thought.org Public Service Unix
http://jottings.thoug
Hello. When I open my mutt email client, the cursor (highlighting mail)
is always located in the middle of the screen. What option do I need to
include in my muttrc so that when I open mutt, the cursor highlights the
topmost email?
-- --
Best,
David Karapetyan
http://davidkarapetyan.homeunix.co
I am running the following against an Active Directory server.
ldapsearch -D "cn=admin_user,cn=users,dc=xx,dc=com" -x -w "password" -
h 10.129.10.42 -p 3268 -b 'dc=abc,dc=com' -s sub '(!
(objectclass=computer))' '(!(mail=*))' dn mail
I am trying to return only objects for which the mail attri
Hello community,
I have a "special" question.
If a client sends an email through my server how can i stop the mail for
being delivered so
i can process the mail and change some things and afterward deliver it.
I have postfix + dovecot installed. Some suggestions ...
Hi all:
I was doing "portupgrade -fa -y" remotely via ssh (desktop xp), it worked fine
and was still running almost two days (7.1). But suddenly i lost power on my xp
station, lost ssh connection to the freebsd7.1 box.
What shall i do so that i don't have to start over again?
Thanks in advance
This week I started seeing this in my syslog:
kernel: Approaching the limit on PV entries, consider increasing either
the vm.pmap.shpgperproc or the vm.pmap.pv_entry_max sysctl.
I changed the shpgperproc to 800 from 200, but I am still getting the
message. These are my current settings:
vm.
Hi,
Silly question... when I use portupgrade on gnome installs, it interrupts
itself a lot to prompt for config options. I normally take all the defaults.
Is there a way to use portupgrade without all the stopping for config
questions? I'd like to leave my laptop alone over-night do
I used to use csup and in my /root/ports-supfile I changed the default
host line to a server near me.
*default host=cvsup.se.FreeBSD.org
Now I've been using portsnap for a while and when installing a new
system I got to question if portsnap look in this file for an update
server or
Hello,
I am interested in using something like ZFS for its distributed nature. I run a
file server
with samba acting as a PDC. I also run a second server as a BDC. What I would
like is a method for keeping both servers "shared data" drives in sync when
both the
PDC and BDC are running.
I am
Len Conrad wrote:
>
> We need to print a line when the 3rd field (with trailing ";"
> delimiter) is, eg, exactly 5 lower case characters
>
> awk ' $3 ~ /^[a-z]{5,5};$/ {print $0} ' file
>
> ... doesn't work.
If ";" is the delimiter character, you need to tell awk
about it (i.e. use t
but can't find a definitive answer.
Thanks and I know this is not strictly a Freebsd question.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd
Hello!
When I boot, it takes about 5 mins before being up and running. Since it's
my first FreeBSD, I didn't thought there was an issue, but I think there's
one ;)
I have a P4 2.8 HT which is too bad computer and I really think the issue is
in freeBSD and the Giant Locked and stuff like that. The
Hi All!
Still reading through the FreeBSD handbook. I'm at section 5.5.3; it
discusses how to edit the /usr/local/etc/fonts/local.conf file to
adjust how X11 handles the anti-aliasing of fonts. It ends (about)
with this sentence: "Anti-aliasing should be enabled the next time the
X server is sta
l/bin/php /home/gs/bin/script.php >>/home/gs/log/
script.log
But that has no effect.
So, the question is, how can a script that runs perfectly when
executed by user gs from the command line, not work at all when run
as user gs's crontab? Not even generate an error message or log
ent
Hi all,
What is the proper method to pass configure arguments when installing a
port?
example, I am trying to build exim with mysql and spf support
make -D "WITH_SPF=YES" -D "WITH_MYSQL=YES"
Please help,
been struggling with this for what seems like forever.
-Grant
_
Hello, i'm korea FreeBSD user
i have problem
i can't install port programs and portsnaps
i can do wget this program
but can't do fetch
FreeBSD STABLE FreeBSD 7.0-STABLE
what is problem?
---
[EMAIL PROTECTED] /usr/ports/net-p2p/rtorrent]# fetch -p
http://libtorrent.rakshasa.no
I installed openoffice 2.4.0 from ports with:
make -DWITHOUT_MOZILLA install clean
Now, when I do a portupgrade it tries to install mozilla:
To build OOo, you should have a lot
of free diskspace (~ 11GB) and memory (~ 2GB).
If you want SDK and/or solver, please type make sdk and/or make solver
=
I installed openoffice 2.4.0 from ports with:
make -DWITHOUT_MOZILLA install clean
Now, when I do a portupgrade it tries to install mozilla:
To build OOo, you should have a lot
of free diskspace (~ 11GB) and memory (~ 2GB).
If you want SDK and/or solver, please type make sdk and/or make solver
=
Hi all
I am using ipf associated with ippool. When I need to change
/etc/ipf/ippool.conf, say add a new member in a group, ippool -F and ippool -f
/etc/ipf/ippool.conf doesn't seem to work. I also tried reloading the ipfilter
rule by 'ipf -Fa -f /etc/ipf/ipf.conf', but ipf doesn't seem to re
Hi
I'm experiencing "The system has no more ptys. Ask your system administrator
to create more.". Well, I'm the system administrator, don't know what to do :)
I want to understand more about ptys in FreeBSD. I have following questions.
ls -l /dev/ | grep pty
crw-rw-rw- 1 root wheel 0,
Hi there.
I'm stuck with splitting input and output traffic. I can't use
srcaddr/dstaddr as the machine generating traffic gets dynamic ip's. I'm
thinking of using input/output for that purpose, but it's not clearly
stated how this parameters are populated. I.e. for outbound connection
we got
I've configured my Apache process to send the ErrorLog to the
syslog:local5 facility.
In my syslog.conf file, I have:
!httpd
*.* /usr/local/apache/logs/error_log
to catch these log messages. This works great, but these messages are
also going into my /
Hi,
This isn't really a FreeBSD question. But I figure most people on this list
would know the answer and so I'm asking. I've tried to get the answer out of
Google, but I guess I am not asking it the right question and so not
getting much hits.
I understand that the defau
Rakhesh Sasidharan writes:
> I understand that the default value of the IFS variable in bash
> is "space, tab, newline".
I believe this to be correct.
> For a script I am playing around with, I want to change IFS to be
> just newline. I tried the obvious like
>
> IFS="\n"
> -or
Hey,
What I'm trying to do involves FreeBSD and IP aliases. Hopefully someone has
some ideas. Here's the general idea of what I'm trying to do:
I've got vr0, which is assigned to some IP address... let's say: 192.168.1.90
with a subnet mask of 255.255.255.0. This is all fine, and everything wor
Hi again--
I'm stumped on this problem, and I'm sure lots of people have
encountered the same thing:
I would like more space in /usr. I've installed another drive and set
it to mount to /mnt. I would like to make FreeBSD(5.2.1) think that
/usr also includes this new drive.
Is there a way to do
Andrew Musselman writes:
> I would like more space in /usr. I've installed another drive and set
> it to mount to /mnt. I would like to make FreeBSD(5.2.1) think that
> /usr also includes this new drive.
>
> Is there a way to do what I want to do?
man ccd.
Hello,
I'm not sure whether I should have posted this to questions or current (since
it's an issue with a recent current) or some other list, but hear me out and
perhaps point me in the right direction?
I recently upgraded a play about box from an older current to one .. a day
before the preempti
701 - 800 of 3827 matches
Mail list logo