Howard Goldstein wrote:
>
> ar device's RAID1 Using the awesome gmirror
> write 1gb: 13.275 13.7
> rd 12.9 13.8
I recently had an opportunity to repeat this test with the same exact
WD3200AAKS (7200RPM consum
On Thu, 26 Jul 2007, Oliver Fromme wrote:
> As an additional note: _If_ the ICH RAID was in hardware
> (which it isn't, as Scott pointed out), it might be
> preferable to use it instead of gmirror, even if it's 5%
> slower, but because it would save a lot of cpu.
>
> Of course, since both are in s
Howard Goldstein <[EMAIL PROTECTED]> wrote:
> [...]
You should fix your e-mail setup. I can't reach you:
>- Transcript of session follows -
> ... while talking to ns1.queue.to.:
> >>> RCPT To:<[EMAIL PROTECTED]>
> <<< 553 local-rblblacklist complain to your provider
> 550 5.1.1
Scott Long wrote:
> Howard Goldstein wrote:
> > Naive test: dd if=/dev/zero of=/fsundertest/tstfile bs=1m count=1000
> > *not including buffered stuff unwritten, the test simply reported dd's
> > idea of the transfer time*, and then the other way where it doesn't matter
> >
> > In firmware
Howard Goldstein wrote this message on Wed, Jul 25, 2007 at 17:24 -0400:
> Scott Long wrote:
> >
> > ICH5 only support SATA-1.
> Dang. Does anyone yield SATA-II speeds with the a PCI controller? I'm
> not sure if 25-30MB/s is even possible with regular PCI
You probably mean 250-300MB/s which is w
On Wed, Jul 25, 2007 at 07:02:58PM -0600, Scott Long wrote:
> You should be able to sustain at least 70MB/s on a single modern drive
> with SATA-1 or SATA-2. If you're not getting that then something in the
> driver or the application is getting in the way. Even with the, um,
> "problems" that Si
Scott Long wrote:
> Howard Goldstein wrote:
>
>> Scott Long wrote:
>>
>>> Howard Goldstein wrote:
>>>
Testbed: Pair of WDC3200AAKS 320gb SATA, freshly newfsd 10gb filesystem
mounted with softupdates, remounted after each test
P4 @ 3ghz on a P4P800 in 6.2-STABLE, sing
Howard Goldstein wrote:
> Scott Long wrote:
>> Howard Goldstein wrote:
>>> Testbed: Pair of WDC3200AAKS 320gb SATA, freshly newfsd 10gb filesystem
>>> mounted with softupdates, remounted after each test
>>> P4 @ 3ghz on a P4P800 in 6.2-STABLE, single user mode, ICH5R controller
>>> detects these SA
Scott Long wrote:
> Howard Goldstein wrote:
>> Testbed: Pair of WDC3200AAKS 320gb SATA, freshly newfsd 10gb filesystem
>> mounted with softupdates, remounted after each test
>> P4 @ 3ghz on a P4P800 in 6.2-STABLE, single user mode, ICH5R controller
>> detects these SATA-II drives inexplicably as S
Howard Goldstein wrote:
> Howard Goldstein wrote:
>> Has anyone done any benchmarks in desktop or server environment
>> comparing geom with an ICH controller through the ar device in RAID1
>> service? Teh google, it seems to pick up grammar school math
>> assignments lots of what may be relevant h
Howard Goldstein wrote:
> Has anyone done any benchmarks in desktop or server environment
> comparing geom with an ICH controller through the ar device in RAID1
> service? Teh google, it seems to pick up grammar school math
> assignments lots of what may be relevant hits for fortunate speakers of
11 matches
Mail list logo