Howard Goldstein wrote:
>
> ar device's RAID1 Using the awesome gmirror
> write 1gb: 13.275 13.7
> rd 12.9 13.8
I recently had an opportunity to repeat this test with the same exact
WD3200AAKS (7200RPM consum
On Thu, 26 Jul 2007, Oliver Fromme wrote:
> As an additional note: _If_ the ICH RAID was in hardware
> (which it isn't, as Scott pointed out), it might be
> preferable to use it instead of gmirror, even if it's 5%
> slower, but because it would save a lot of cpu.
>
> Of course, since both are in s
Howard Goldstein <[EMAIL PROTECTED]> wrote:
> [...]
You should fix your e-mail setup. I can't reach you:
>- Transcript of session follows -
> ... while talking to ns1.queue.to.:
> >>> RCPT To:<[EMAIL PROTECTED]>
> <<< 553 local-rblblacklist complain to your provider
> 550 5.1.1
Scott Long wrote:
> Howard Goldstein wrote:
> > Naive test: dd if=/dev/zero of=/fsundertest/tstfile bs=1m count=1000
> > *not including buffered stuff unwritten, the test simply reported dd's
> > idea of the transfer time*, and then the other way where it doesn't matter
> >
> > In firmware
Howard Goldstein wrote this message on Wed, Jul 25, 2007 at 17:24 -0400:
> Scott Long wrote:
> >
> > ICH5 only support SATA-1.
> Dang. Does anyone yield SATA-II speeds with the a PCI controller? I'm
> not sure if 25-30MB/s is even possible with regular PCI
You probably mean 250-300MB/s which is w
On Wed, Jul 25, 2007 at 07:02:58PM -0600, Scott Long wrote:
> You should be able to sustain at least 70MB/s on a single modern drive
> with SATA-1 or SATA-2. If you're not getting that then something in the
> driver or the application is getting in the way. Even with the, um,
> "problems" that Si
Scott Long wrote:
> Howard Goldstein wrote:
>
>> Scott Long wrote:
>>
>>> Howard Goldstein wrote:
>>>
Testbed: Pair of WDC3200AAKS 320gb SATA, freshly newfsd 10gb filesystem
mounted with softupdates, remounted after each test
P4 @ 3ghz on a P4P800 in 6.2-STABLE, sing
Howard Goldstein wrote:
> Scott Long wrote:
>> Howard Goldstein wrote:
>>> Testbed: Pair of WDC3200AAKS 320gb SATA, freshly newfsd 10gb filesystem
>>> mounted with softupdates, remounted after each test
>>> P4 @ 3ghz on a P4P800 in 6.2-STABLE, single user mode, ICH5R controller
>>> detects these SA
Scott Long wrote:
> Howard Goldstein wrote:
>> Testbed: Pair of WDC3200AAKS 320gb SATA, freshly newfsd 10gb filesystem
>> mounted with softupdates, remounted after each test
>> P4 @ 3ghz on a P4P800 in 6.2-STABLE, single user mode, ICH5R controller
>> detects these SATA-II drives inexplicably as S
Howard Goldstein wrote:
> Howard Goldstein wrote:
>> Has anyone done any benchmarks in desktop or server environment
>> comparing geom with an ICH controller through the ar device in RAID1
>> service? Teh google, it seems to pick up grammar school math
>> assignments lots of what may be relevant h
Howard Goldstein wrote:
> Has anyone done any benchmarks in desktop or server environment
> comparing geom with an ICH controller through the ar device in RAID1
> service? Teh google, it seems to pick up grammar school math
> assignments lots of what may be relevant hits for fortunate speakers of
Has anyone done any benchmarks in desktop or server environment
comparing geom with an ICH controller through the ar device in RAID1
service? Teh google, it seems to pick up grammar school math
assignments lots of what may be relevant hits for fortunate speakers of
German :(
_
12 matches
Mail list logo