Peter Grehan wrote:
Hi Roman,
When I was seing this 'Failed to emulate instruction at
0x80594f3a', it happened right after boot loader menu (the one
with the ascii-art). At that time I had 'hw.physmem=0x18000' in my
host's loader.conf. Also the problem wasn't 100%
Peter Grehan wrote:
Hi Roman,
I start a VM like that:
sudo /usr/sbin/bhyveload -m 256 -M 0 -h /var/run/bhyve/test1/vm1 test1
sudo /usr/bin/cpuset -l 0-3 /usr/sbin/bhyve -m 256 -M 0 -s
1,virtio-net,tap0 test1
The last commands give me:
Failed to emulate instruction at
Hi Roman,
When I was seing this 'Failed to emulate instruction at
0x80594f3a', it happened right after boot loader menu (the one
with the ascii-art). At that time I had 'hw.physmem=0x18000' in my
host's loader.conf. Also the problem wasn't 100% reproducible, it
started to show up
Hi Roman,
I start a VM like that:
sudo /usr/sbin/bhyveload -m 256 -M 0 -h /var/run/bhyve/test1/vm1 test1
sudo /usr/bin/cpuset -l 0-3 /usr/sbin/bhyve -m 256 -M 0 -s 1,virtio-net,tap0
test1
The last commands give me:
Failed to emulate instruction at 0x80594f3a
What could be wrong
Andreas Nilsson wrote:
On Sun, Sep 2, 2012 at 6:56 PM, Roman Bogorodskiy no...@freebsd.org wrote:
Roman Bogorodskiy wrote:
Peter Grehan wrote:
Hi Roman,
Yeah, but I'd like to leave more memory for the host system, so I
specified 6GB. I have 8GB at all, so 2GB
Peter Grehan wrote:
Hi Roman,
Yeah, but I'd like to leave more memory for the host system, so I
specified 6GB. I have 8GB at all, so 2GB left for VMs.
Should it cause any problems?
No, that should be fine.
BTW, I encountered a problem with the tap0 device. I create a tap
On Sun, Sep 2, 2012 at 6:56 PM, Roman Bogorodskiy no...@freebsd.org wrote:
Roman Bogorodskiy wrote:
Peter Grehan wrote:
Hi Roman,
Yeah, but I'd like to leave more memory for the host system, so I
specified 6GB. I have 8GB at all, so 2GB left for VMs.
Should it cause
Hi Roman,
Yeah, but I'd like to leave more memory for the host system, so I
specified 6GB. I have 8GB at all, so 2GB left for VMs.
Should it cause any problems?
No, that should be fine.
BTW, I encountered a problem with the tap0 device. I create a tap device
and assign an address to it,
Hi,
I'm running into a problem. I did a fresh checkout of 'bhyve' branch
from svn and followed the instruction here:
http://people.freebsd.org/~neel/bhyve/bhyve_instructions.txt
In my /boot/loader.conf I have:
debug.witness.watch=0
hw.physmem=0x18000
and dmesg says:
real memory =
