Hi,
Just a little bit of non-expert info from me here,
On Tue, Jun 5, 2012 at 5:10 PM, Joe(theWordy)Philbrook wrote:
>
> It would appear that on Jun 3, Eric Auer did say:
>
>> > 3) you wouldn't happen to know if using clonezilla's expert mode
>> > to de-select cloning the "hidden data betw
Hi,
On Wed, Jun 6, 2012 at 11:27 AM, Bret Johnson wrote:
>
> Unfortunately, no. The drivers are still in the early (beta) stages, so a
> lot of the information
> is still fairly technical. Also, USB is EXTREMELY complicated, so it's hard
> to come up with
> a short summary that will work all
Hi,
As mentioned, sadly, most "classic" (old) DOS software knows
nothing about cards outside of a limited range like SB16 and GUS.
Everything newer (e.g. AC97 or HDA) is almost always incompatible. So
it's unlikely you can just "plug in" a driver to make it work.
If you can recompile some apps
Hi,
On Wed, Jun 6, 2012 at 6:15 AM, Eric Auer wrote:
>
>> Two apps do not run using the first boot option JEMMEX:
>>
>> - Borland Pascal 7
>> runtime exception 000E, which made me first think about the
>> fast-CPU-problem, but this installation was patched already.
>> during web research I found
Hello,
I have successfuly installed MS Client. I can access shared folder on another
machine (WinXP) however I have read-only access :(.
Im pretty much sure that folder is full access for everyone (i tried from
another windows and linux machine).
Any thing I forgot to do by DOS side ?
Best regar
Op 6-6-2012 17:08, cordat...@aol.com schreef:
> On most OHCI drivers (including DOSUSB), the driver will load but then
> the keyboard starts acting erratically. (I'm using PS2 keyboard not
> USB) Effectively the computer is not usable at this point - I suppose I
> could write a batch file to test
Here's some more info on my sound card (I got it from running the command
"mpxplay.exe /sct"):
VIA VT8233, port: EC00, irq: 255, chiprev: 50, model: 9012
--- A FreeDOS User
--
Live Security Virtual
> I tried Bret J.'s USB driver. USBUHCI loads, but complains about
> legacy USB mode. Do I have to switch off legacy in BIOS?
You shouldn't have to, but that's certainly an option. You can use the
/DisableLegacy option (either on the command-line or in the USBUHCIL
environment variable) to bypa
Short answer: you can't
DOS programs where made to be compatible with specific hardware.
The success of your program was to have a broad hardware compatibility.
In the case of sound, every program was SoundBlaster compatible
because almost everybody have one, games for instance.
I have to buy a
Hey,
I need to know how to find, figure out, configure or whatever my sound
driver. I need a driver for my sound card, but I don't know how to do it.
If this helps at all, somehow Mpxplay magically got the sound to play
through my PC speakers, while all my other programs and games (mostly the
ga
Hi Eric,
My MB has EHCI/USB 2.0 and OHCI/USB 1.1. My understanding was Bret's drivers
are strictly UHCI.
On most OHCI drivers (including DOSUSB), the driver will load but then the
keyboard starts acting erratically. (I'm using PS2 keyboard not USB)
Effectively the computer is not usable at
Hi!
> Didn't bother trying Bret's drivers because I have EHCI /
> OHCI. Georg's DOSUSB is the only one that works for me to
> some degree.
EHCI = USB 2.0, OHCI = similar to UHCI, both USB 1.x...
(you have no XHCI = USB 3.0 I guess) In what ways do the
DOSUSB drivers work, in which ways do they n
I've tried the Panasonic driver, it hangs on my PC. Also tried DUSE, Iomega
and whatever else was on a
boot disk which someone put together. Didn't bother trying Bret's drivers
because I have EHCI / OHCI. Georg's DOSUSB is the only one that works for me to
some degree.
Just curious if there
Hi!
> Two apps do not run using the first boot option JEMMEX:
>
> - Borland Pascal 7
> runtime exception 000E, which made me first think about the
> fast-CPU-problem, but this installation was patched already.
> during web research I found something mentioning XMS memory size.
> The PC has got 3
Hi,
Since I switch HIDs between two PCs using an USB switch, I would be
happy if the USB mouse worked.
I tried Bret J.'s USB driver. USBUHCI loads, but complains about legacy
USB mode. Do I have to switch off legacy in BIOS?
after the driver is loaded, the keyboard does not work any more.
loading
Hi,
let's continue where I stopped a year ago. ;)
I tried fdupdate to update my 1.1 installation.
But, the DOS PC is still offline. I don't have a spare network cable. Is
there any way to tell fdupdate/fdpkg where to find the files locally?
I believe there are a lot of packages that are not yet
Hi,
some of you may remember: I tried 1.0 a long time ago, and failed.
Now I successfuly installed 1.1 and it runs fine. Thanks ;)
Hardware is P3 on i440 BX
nb. If you answer only on a single topic, you might change the subject.
I did not want to write 10 separate emails.
Two apps do not run usi
17 matches
Mail list logo
