On Tue, 7 May 2002, Peter Shin wrote:
I've encountered that the maximum number of sql sockets that can only be
used is 25. Any bigger than 25 will not work at all.
The symptom is that although radiusd is listening on port 1812/1813, it will
not respond at all. There won't be any log message,
Hello dear all,
I want to use free radius along with MySQL. When I
config /etc/raddb/radius.conf to use MySQL, radiusd no
more runs. It messages that can't instantiate sql
module. I further investigated the problem, until I
found that the rlm for MySQL doesn't compile well.
While compiling,
I compiled the pam_radius_auth on HP-UX 11 (PA-RISC 1.1 processor), but the
password doesn't get encrypted correctly. When I decrypt the password on
the server using the secret it just shows random characters. Could this be
due to the md5 module ??
Thanks,
Walter.
-
List
Antigen for Exchange found valentin.scr infected with VIRUS= Win32.Yaha
(CA(Vet),Sophos,CA(InoculateIT)) virus.
The file is currently Removed. The message, Melt the Heart of your Valentine with
this beautiful Screen saver, was
sent from Screen Saver and was discovered in SMTP Messages\Inbound
Incident Information:-
Originator:[EMAIL PROTECTED]
Recipients:[EMAIL PROTECTED]
Subject: Melt the Heart of your Valentine with this beautiful Screen saver
WARNING: The file valentin.scr you received was infected with the
W32/Yaha@MM virus. The file attachment was not successfully
The message from [EMAIL PROTECTED] to
[EMAIL PROTECTED] was infected.
For this reason, the message was not delivered to the destination.
If you are the sender of the message, please disinfect your computer then send it
again.
If you are the destination of the message, ask the sender to
On Mon, 6 May 2002, Ben Casado wrote:
We fixed an issue that we had with accounting and the daemon ran ok for a
bit, but then it crashed with a segmentation fault.
The only way that we were able to bring it up was by cleaning all the .db
files but we are sure that this is not the right way
On Mon, 6 May 2002, Ben Casado wrote:
Acct-Status-Type = Stop
NAS-Identifier = Arecibo
Attr-172818435 = 01002D41D706939B
Service-Type = Framed-User
NAS-Port = 16387
NAS-Port-Type = Async
Class = 0x653934
This e-mail is never sent unsolicited. If you need to unsubscribe,
follow the instructions at the bottom of the message.
***
Melt the Heart of your loved ones with this beautiful Screen saver from
www.screensaverin.com
* To
On Mon, 6 May 2002, Ben Casado wrote:
WOW!!!
I also get an address outside our ippool range I understand that is
within the subnetmask range, but is NOT within my
specific range!!!
===
ippool arecibo {
session-db =
Hello,
This is the mail system at twisp.olympus.net. A message was just sent
from your email address:
Screen Saver [EMAIL PROTECTED]
to one of our customers at:
[EMAIL PROTECTED]
We were unable to deliver it because it contains an attachment
named:
valentin.scr
which appears to be
I have the core..
It is 139mb which is what I had left of memory, what can we do now?
- Original Message -
From: Kostas Kalevras [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, May 07, 2002 6:23 AM
Subject: Re: IPPOOL
On Mon, 6 May 2002, Ben Casado wrote:
We fixed an
Hi all,
freeradius failed after the log rotation. But when i restarted it
manually after, there was any problem.
What could have caused it ?
Here below the errors :
Sat May 4 06:30:51 2002 : Info: Reloading configuration files.
Sat May 4 06:30:51 2002 : Info: rlm_sql: Driver rlm_sql_mysql
here is some of the usual crash output. I would like to help
as much as i can to get this resolved.
Ben
stat
system name:SunOS
release:5.8
node name: radius
version:Generic_108528-13
machine name: sun4u
time of crash: Tue May 7 10:38:39 2002
age of
On Tue, 7 May 2002, Do-Risika RAFIEFERANTSIARONJY wrote:
Hi all,
freeradius failed after the log rotation. But when i restarted it
manually after, there was any problem.
What could have caused it ?
Here below the errors :
Sat May 4 06:30:51 2002 : Info: Reloading configuration files.
On Mon, 6 May 2002, al wrote:
setup:
freeradius post .5 (cvs from May 6 2002)
using sql in accounting (and loving it)
rlm_sqlcounter
I have gotten the latest cvs in hopes to use rlm_sqlcounter, (as rlm_counter
crashes on me, something about threads)
Could you provide more info on the
Nope guys the real output from the core could not be read. The earlier
results were NOT from the core, we get:
# crash core
dumpfile = core, namelist = /dev/ksyms, outfile = stdout
crash: core is not a kernel core file (bad magic number 7f454c46)
crash: cannot open kvm - dump file core
# act -d
On Tue, 7 May 2002, Ben Casado wrote:
Nope guys the real output from the core could not be read. The earlier
results were NOT from the core, we get:
# crash core
dumpfile = core, namelist = /dev/ksyms, outfile = stdout
crash: core is not a kernel core file (bad magic number 7f454c46)
On Tue, 7 May 2002, Ben Casado wrote:
#0 0xfef706a0 in exit () from /usr/platform/SUNW,Ultra-60/lib/libc_psr.so.1
#1 0x397f4 in ippool_authorize (instance=0x12e748, request=0x821bfb8) at
rlm_ippool.c:495
#2 0x1fb54 in call_modsingle (component=4, sp=0x12e4a0, request=0x821bfb8,
Hi Al,
There is a README.txt file in the src/modules/rlm_sqlcounter that contains
a more complete example of what to put in your radiusd.conf file.
You don't need to put anything in the authenticate block. To activate it,
just add an instance of the rlm_sqlcounter module to your authorize
Peter Shin [EMAIL PROTECTED] wrote:
I've encountered that the maximum number of sql sockets that can only be
used is 25. Any bigger than 25 will not work at all.
The symptom is that although radiusd is listening on port 1812/1813, it will
not respond at all. There won't be any log message,
Hi !
It seems there is a bug in proxy implementation in freeradius-0.5.
Accounting packets never sent to xxx.xxx.xxx.xxx if I specify in proxy.conf
following construction:
realm NULL {
type= radius
authhost= LOCAL
accthost=
al [EMAIL PROTECTED] wrote:
i would get :radclient:Unknown attribute User-Password
i edit /usr/local/bin/radtest and it works
46c46
echo User-Password = \$2\
---
echo Password = \$2\
is this right??
should someone maybe fix in the sources or am i doing it wrong or have
Simon Allard [EMAIL PROTECTED] wrote:
Are there any plans to have a post authentication module section?
That would be a good idea.
What about a post-proxy (Just before you send the radius packet back to
the NAS)?
Yes, too.
Ideally, you could control the flow of packet
Alireza Farmad [EMAIL PROTECTED] wrote:
I want to use free radius along with MySQL. When I
config /etc/raddb/radius.conf to use MySQL, radiusd no
more runs. It messages that can't instantiate sql
module. I further investigated the problem, until I
found that the rlm for MySQL doesn't
Andrey Lakhno [EMAIL PROTECTED] wrote:
Is it safe to use cvs version of freeradius ?
How is it stable compared to releases ? (e.g. 0.5)
It's as stable as we know how to make it, and it has a number of
other bug fixes over 0.5
Alan DeKok.
-
List info/subscribe/unsubscribe? See
I'm not sure if you can define your check item in the users file because
there is an initialization order problem. Your new check item attribute
will not be defined before your users file is parsed resulting in an
error. If anyone knows a work around here, please let me know.
My workaround
At 06:47 PM 5/7/2002 +0300, Andrey Lakhno wrote:
Hi Alan!
On Tue, 07 May 2002, Alan DeKok wrote:
Andrey Lakhno [EMAIL PROTECTED] wrote:
It seems there is a bug in proxy implementation in freeradius-0.5.
Accounting packets never sent to xxx.xxx.xxx.xxx if I specify in
proxy.conf
Lecossois, Walter [EMAIL PROTECTED] wrote:
I compiled the pam_radius_auth on HP-UX 11 (PA-RISC 1.1 processor), but the
password doesn't get encrypted correctly. When I decrypt the password on
the server using the secret it just shows random characters. Could this be
due to the md5 module ??
On Mon, 6 May 2002 11:04:36 -0300, Rodrigo Gonzalez wrote:
Means that the server is restarting all the time, isnt it? And thats explained
why its taking all your cpu time... Its not a single process, but several restarts
of radius server... Does it make sense for you?
What´s the error when in
Try reading radiusd.conf
--Original Message Text---
From: Nick Linden
Date: Mon, 6 May 2002 16:20:41 -0500
Hello,
I'd imagine this question has already been asked in the past, but, is there a way to limit the times an account can login. Say you only want the account active between 9am -
31 matches
Mail list logo
