my problem, I need to stop the radiusd service then delete
the db.ippool and db.ipindex files then restart the radiusd.
Any help please to solve my problem...
ippool hangar {
range-start = 172.16.10.50
range-stop = 172.16.10.60
Hi all, Guru..
I am configuring FreeRadius Server 07 and Portslave
2001-01-19 for internet prepaid in my campuss
My problem is difficult disconnect users while their
login to RADIUS. I have Idea to count for each
session
time use Session Time Out While user Logging on, But
I
am not
Gumilar Satriawan [EMAIL PROTECTED] wrote:
Alternatifely use Rlm_sqlcounter, But It intend not
for each user account balance but For Each Group
Defined in daily, weekly, etc.., 9 ( I have to
modified in long time ). I need For each users
can have Account Balance (Time Duration) and then
On Mon, 29 Jul 2002, Ador Dauz wrote:
To all,
Please need your help or other solutions.
I using freeradius 0.6 and I used the rlm_ippool module.
this is what I observed, Using my setup which it pool 10
IP Address range, so I try to login 10 times and It gave
me the right IP address range
modem
if User account expired..
Please Help Me.. GURUs, mainly for Mr.Alan and Mr.
Chris ...
Thank In Advanced
Gumilar Satriawan
__
Do You Yahoo!?
Yahoo! Health - Feel better, live better
http://health.yahoo.com
-
List info/subscribe
To all,
Please need your help or other solutions.
I using freeradius 0.6 and I used the rlm_ippool module.
this is what I observed, Using my setup which it pool 10
IP Address range, so I try to login 10 times and It gave
me the right IP address range which in my configuration.
After that, In my
Bertrand TACHAGO [EMAIL PROTECTED] wrote:
No, i don't have duplicates ports listed for the service radius.
1645 is listed in the /etc/services file for datametrics (old radius entry)
Then why did you say it was listed along with 1812 and 1813, for
RADIUS? That just confused the issue.
: no response from server.
I would like to add that ports 1645, 1812 and 1813 are there in /etc/services
file.
Is the freeradius 0.6's configuration different freeradius 0.5's configuration?
Because I really don't understand what's happen.
Thanks for your help
Cheers,
Aaron T. Weiker wrote:
When you run
Bertrand TACHAGO wrote:
I launch radtest : radtest my_user_name my_password radius_server_ip_address 10
client_secret (client_secret is the same as in the /etc/raddb/clients file).
Instead of radius_server_ip_address, try localhost or 127.0.0.1
(and the appropriate client_secret for that IP
Bertrand TACHAGO [EMAIL PROTECTED] wrote:
I've been trying to run the radius server in debug mode ( radiusd
-xxyz -l stdout ); it isn't showing errors and when i try to
connect, the server isn't seeing the request.
It's obvious you haven't read the FAQ, and you haven't closely read
the
No, i don't have duplicates ports listed for the service radius.
1645 is listed in the /etc/services file for datametrics (old radius entry)
1812 is lited for radius and 1813 for radius-acct (radius accounting).
I didn't add anything there, that's how this file was when I was running freeradius
udp -i eth0 -j ACCEPT
- A input -s 0/0 1813 -d radius_server_ip_address 1813 -p udp -i eth0 -j ACCEPT
Please, can anyone help me to solve this crucial probleme?
Thanks a lot in advance
Ador Dauz wrote:
I hope all your ports is open, specially for the radius.
Because you might forgot the port
radius_server_ip_address 1645 -p udp -i eth0 -j ACCEPT
- A input -s 0/0 1812 -d radius_server_ip_address 1812 -p udp -i eth0 -j ACCEPT
- A input -s 0/0 1813 -d radius_server_ip_address 1813 -p udp -i eth0 -j ACCEPT
Please, can anyone help me to solve this crucial probleme?
Thanks a lot in advance
Ador
When you run it in debug mode are there any errors? Can you verify that
the radius server is seeing the request.
Aaron Weiker
-Original Message-
From: Bertrand TACHAGO [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 23, 2002 12:38 PM
To: [EMAIL PROTECTED]
Subject: Re: Need help
Run radiusd in debug mode with the -x flag. Then let us know what
errors or stange things are appearing.
Aaron Weiker
-Original Message-
From: Bertrand TACHAGO [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 22, 2002 11:14 AM
To: [EMAIL PROTECTED]
Subject: Need help please
Hello,
I was using freeradius version 0.5 with Redhat Linux 7.1 and everythings
were working properly. But since i upgraded the system to Redhat Linux
7.2, nothing is working: anyone is unable to connect. Please can someone
help me solve this problem?
Thanks in advance
--
Bertrand TACHAGO
Hello,
I was using freeradius version 0.5 with Redhat Linux 7.1 and everythings
were working properly. But since I upgraded the system to Redhat Linux
7.2, nothing is working now: anyone is unable to connect. Please can
someone
help me solve this problem?
Thanks in advance
--
Bertrand TACHAGO
Hello,
I was using freeradius version 0.5 with Redhat Linux 7.1 and everythings
were working properly. But since i upgraded the system to Redhat Linux
7.2, nothing is working: anyone is unable to connect. Please can someone
help me solve this problem?
Thanks in advance
--
Bertrand TACHAGO
Bertrand TACHAGO [EMAIL PROTECTED] wrote:
...
Posting 4 copies of the same message to the list without reading any
replies isn't nice.
Read the FAQ.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Sorry, there was a problem with my mail server.
Alan DeKok wrote:
Bertrand TACHAGO [EMAIL PROTECTED] wrote:
...
Posting 4 copies of the same message to the list without reading any
replies isn't nice.
Read the FAQ.
Alan DeKok.
--
Bertrand TACHAGO
Computer specialist, Network
:
try recompiling the program
- Original Message -
From: Bertrand TACHAGO
To: [EMAIL PROTECTED]
Sent: Monday, July 22, 2002 10:28 AM
Subject: Need help please
Hello,
I was using freeradius version 0.5 with Redhat Linux 7.1 and everythings
were working properly. But since I
]] On Behalf Of
Bertrand TACHAGO
Sent: Monday, July 22, 2002 1:17 PM
To: Enesha Fairluck
Cc: [EMAIL PROTECTED]
Subject: Re: Need help please
I had recompiled the program as you adviced me but at now,
when I'm trying to start the program, I have the following
error: Starting Freeradius
and everythings
were working properly. But since i upgraded the system to Redhat Linux
7.2, nothing is working: anyone is unable to connect. Please can someone
help me solve this problem?
Thanks in advance
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi all,
I need some hints for a configuration.
I've read trough the docs but maybe for my stupidity I' m unable to
realize a particular configuration.
What I need to realize is an authentication scheme based on username for
access and particular value pair attribute,and on a group for other
Pierluigi Frullani [EMAIL PROTECTED] wrote:
What I need to realize is an authentication scheme based on username for
access and particular value pair attribute,and on a group for other
attribute.
I don't think that should be too hard.
So i need to use some mangle that could be in the user
Thursday, July 11, 2002, 1:48:17 AM, Brad Crotchett wrote:
BC *in* the modules section.
BC Ok, then what parameters would it be looking for? I have told it the path
BC to the dbm file, what else would it need?
Only usersfile parameter is expected in this version. In general way
the section
use_dbm;
./src/main/radiusd.c:int use_dbm = FALSE;
I was unable to determine whether this flag needs to be set for dbm to
work or if it's simply unused.
It's unused. It should be deleted.
Alan DeKok.
Ok, I will try that and see what happens.
Thanks a lot for the help,
Brad
-
List
BC *in* the modules section.
BC Ok, then what parameters would it be looking for? I have told it the
path
BC to the dbm file, what else would it need?
Only usersfile parameter is expected in this version. In general way
the section of dbm configuration look like:
dbm {
usersfile =
use_dbm;
./src/main/radiusd.c:int use_dbm = FALSE;
I was unable to determine whether this flag needs to be set for dbm to
work or if it's simply unused.
It's unused. It should be deleted.
Alan DeKok.
Ok, I will try that and see what happens.
Thanks a lot for the help,
Brad
I
BC Ok, then what configuration do you think is missing? When I start radius I
BC keep getting this error:
BC Error: ERROR: Cannot find a configuration entry for module dbm.
BC Thanks,
BC Brad
Please send a fragment of your configuration file with all dbm
related lines. Also specify
{
dbm
}
These are the only three instances of dbm in my radiusd.conf file. Thanks
again for the help!
Brad
-
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Dear Brad Crotchett,
--Thursday, July 11, 2002, 8:19:37 PM, you wrote to [EMAIL PROTECTED]:
BC authenticate {
BC dbm
BC }
rlm_dbm doesn't authenticates user. It only stores user's info. Remove
dbm from authenticate section.
--
~/ZARAZA
rlm_dbm doesn't authenticates user. It only stores user's info. Remove
dbm from authenticate section.
Ok, that took away my error about dbm, but now I have the following error:
ERROR: Cannot find a configuration entry for module pap.
Right now pap is the only thing uncommented in
Brad Crotchett [EMAIL PROTECTED] wrote:
Ok, that took away my error about dbm, but now I have the following error:
ERROR: Cannot find a configuration entry for module pap.
It sounds like something is really wrong with your local
installation.
Try deleting ALL of the FreeRADIUS
It sounds like something is really wrong with your local
installation.
Try deleting ALL of the FreeRADIUS related files, and installing
the snapshot from last night.
Ok thanks, that got the dbm module to load without any errors. I think I am
really close now, but when I run radtest I get
Brad Crotchett [EMAIL PROTECTED] wrote:
Ok thanks, that got the dbm module to load without any errors. I think I am
really close now, but when I run radtest I get the following: rad_recv:
Access-Reject packet from host 208.142.64.112:1645, id=43, length=20
and when I tail the radiusd.log
Hello.
I not often read this list, so can't answer question related to dbm
module in proper time.
Here new version of rlm_dbm module documentation written by Bjorn
Nordbo. Please apply this version.
Now I can answer subject questions.
Wednesday, July 10, 2002, 12:07:15 AM, Alan DeKok wrote:
Andrei Koulik [EMAIL PROTECTED] wrote:
Here new version of rlm_dbm module documentation written by Bjorn
Nordbo. Please apply this version.
Added, thanks.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
ndrei Koulik [EMAIL PROTECTED] wrote:
Here new version of rlm_dbm module documentation written by Bjorn
Nordbo. Please apply this version.
Added, thanks.
Alan DeKok.
Yeah, thanks a lot...that is helpful. I have added the following lines to
radiusd.conf:
dbm {
Brad Crotchett [EMAIL PROTECTED] wrote:
Yeah, thanks a lot...that is helpful. I have added the following lines to
radiusd.conf:
...
under the modules section.
*in* the modules section.
Now when I start radius I get the following error:
ERROR: Cannot find a configuration entry
*in* the modules section.
Ok, then what parameters would it be looking for? I have told it the path
to the dbm file, what else would it need?
should be it.
Alan DeKok.
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-
List
Brad Crotchett [EMAIL PROTECTED] wrote:
Ok, then what parameters would it be looking for? I have told it the path
to the dbm file, what else would it need?
I don't know, sorry. All I know about it is what I've read in the
module documentation.
Alan DeKok.
-
List
Ok, then what parameters would it be looking for? I have told it the path
to the dbm file, what else would it need?
I don't know, sorry. All I know about it is what I've read in the
module documentation.
A few months ago I looked into dbm support too. I wasn't sure it was
working, so
J.J.Bailey [EMAIL PROTECTED] wrote:
A few months ago I looked into dbm support too. I wasn't sure it was
working, so I started reading the code. This is from today's
snapshot, unchanged since earlier:
muttley# find . -print | xargs fgrep use_dbm
./src/include/radiusd.h:extern int
Johnno wrote:
I have just install freeradius 0.6 and I get this when I ran
check-radiusd-config
HASH: Reinitializing hash structures and lists for caching...
rlm_unix: You MUST specify a shadow password file!
HASH: unable to create user hash table. disable caching and run debugs
How do I test to see if the radius server is working right...
I can see that is running fine
Johnno
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Thanks for the help! I am using freeradius 0.6 and my radius.conf does not
have anything about DBM in it. In the Module Configuration section I have
PAM, UNIX, EAP, MS-CHAP, PAP, LDAP, passwd, realm, and pre-processing, but
nothing about DBM. I read somewhere that you can run ./configure
At 05:15 PM 7/9/2002 +1200, Johnno wrote:
I have just install freeradius 0.6 and I get this when I ran
check-radiusd-config
HASH: Reinitializing hash structures and lists for caching...
rlm_unix: You MUST specify a shadow password file!
HASH: unable to create user hash table. disable caching
At 10:23 AM 7/9/2002 +0300, Nikodim Nikodimov wrote:
Hi again,
I post one e-mail yesterday about pptpradius$mysql but no one answer me :(((
I manage to make something by myself but now when I tried to established a
connection and authentication I receive the following response
and this is
At 11:31 PM 7/9/2002 +1200, Johnno wrote:
How do I test to see if the radius server is working right...
I can see that is running fine
Use the 'radtest' utility that comes with the server to send it sample
requests. Read all the documents in ~/doc, as they contain lots of
helpful examples.
I found the problem. I was trying to assign one same the same IP address.
Thanks
- Original Message -
From: Chris Parker [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, July 09, 2002 5:36 PM
Subject: Re: help with radius authentication
At 10:23 AM 7/9/2002 +0300, Nikodim
Title: RE: FreeRADIUS 0.6.0 Module HELP!
To all,
I have no idea why, but when I run radiusd -X it loads fine, and is listening on the proper ports, but does load ANY modules. I have sql, preprocess, files, pap, etc. configured properly in radiusd.conf and I have the library path pointing
Brad Crotchett [EMAIL PROTECTED] wrote:
I read somewhere that you can run ./configure with the --with-dbm
flag, and I have tried that with identical results.
So you didn't try looking at 'configure --help', which outputs the
flags it *does* accept.
There is no '--with-dbm'
I am using
radtest
- Original Message -
From: Johnno [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, July 09, 2002 5:31 AM
Subject: How to test help please
How do I test to see if the radius server is working right...
I can see that is running fine
Johnno
-
List info/subscribe
Title: Someone please help???
To all,
I've posted 3 times regarding this matter, and I'm not getting any response. I realize this seems like a very newbie question, if it is then I am sorry to waste your time but I would love a response at least.
I cannot get any rlm_ modules to load when
Brad Crotchett [EMAIL PROTECTED] wrote;
I don't think the fastuser module will support exactly what we need. You
said that freeradius should refer to a module in radius.conf if it detected
dbm libraries upon install.
No, I didn't. I said that the module would be built automatically
if
Configure the server to use the DBM module. Configure the DBM
module with the values it needs. These configurations do NOT come
with the server by default.
Never mind...
I've added them to the server.
Look in the CVS snapshot from tonight:
doc/rlm_dbm
On Tue, 09 Jul 2002 21:28:04 +0200, [EMAIL PROTECTED] wrote:
If you have a windows machine around there, you cant test it with ntradping.
http://www.mastersoft-group.com/download
How do I test to see if the radius server is working right...
I can see that is running fine
-
List
We are trying to use a berkeley style dbm hash file for authentication with
freeradius 0.6. I have compiled freeradius with DBM support, but now I am
not sure how to tell radius to use my DBM file instead of the users file.
Any help is greatly appreciated.
Brad
-
List info/subscribe
of telling FreeRADIUS to build
with DBM.
but now I am not sure how to tell radius to use my DBM file instead
of the users file. Any help is greatly appreciated.
See 'radiusd.conf'
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
12:32 PM
To: [EMAIL PROTECTED]
Subject: SP/ROUTING: Re: HELP!.Using Berkeley DBM
Brad Crotchett [EMAIL PROTECTED] wrote:
We are trying to use a berkeley style dbm hash file for authentication
with
freeradius 0.6. I have compiled freeradius with DBM support,
I'm not sure how you did
Brad Crotchett [EMAIL PROTECTED] wrote:
Yeah, I guess the compilation was actually from cistron-radiusmy bad.
So in radiusd.conf I would specify the path to my dbm file under what
section?
If you're using Cistron, it doesn't *have* a 'radiusd.conf'.
Ask on the Cistron list.
Alan
No, I am using freeradius...I was just confused earlier because I was trying
cistron first.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Alan DeKok
Sent: Monday, July 08, 2002 1:00 PM
To: [EMAIL PROTECTED]
Subject: Re: SP/ROUTING: Re: HELP!.Using
Brad Crotchett [EMAIL PROTECTED] wrote:
No, I am using freeradius...I was just confused earlier because I was trying
cistron first.
OK, then you edit the relevant section in 'radiusd.conf' for the
module you're using. Look for 'dbm', it's not hard.
Note that the Cistron dbm files CANNOT
Thanks for the help! I am using freeradius 0.6 and my radius.conf does not
have anything about DBM in it. In the Module Configuration section I have
PAM, UNIX, EAP, MS-CHAP, PAP, LDAP, passwd, realm, and pre-processing, but
nothing about DBM. I read somewhere that you can run ./configure
in
windows which help me a lot
to find out problems and it works without any
problem.
3.- The problem ocurrs when I trying to make a real
dialup with the accounts I
created in my database radius (mysql). To be clear
with account that are
authentificated with another radius server it says
thanks a lot, goem
I found out that my problems is in the NAS(MAX6000) that I have, I added my ip
in the menu
ethernetMod ConfigRADIUS SERVER
Actually before I started to do accounting and to proxy to another radius I
did not had this problem but now if I don't put my ip in this menu my
At 06:48 PM 7/8/2002 -0400, Gonzalo Ivan Lozano Hoyos wrote:
thanks a lot, goem
I found out that my problems is in the NAS(MAX6000) that I have, I added
my ip
in the menu
ethernetMod ConfigRADIUS SERVER
Mon Jul 8 11:45:38 2002 : Error: rlm_sql: Stop packet with zero session
length.
I have just install freeradius 0.6 and I get this when I ran
check-radiusd-config
HASH: Reinitializing hash structures and lists for caching...
rlm_unix: You MUST specify a shadow password file!
HASH: unable to create user hash table. disable caching and run debugs
radiusd.conf[462]: unix:
thanks
On Sunday 07 July 2002 07:38 am, Alan DeKok wrote:
Ron Ripley [EMAIL PROTECTED] wrote:
I am trying to find some information on some dictionary items.
specifically the dictionary.tunnel
each attribute has this has_tag keyword, what does that do?
It says that the attributes
I have 2 numbers and 2 realms i'm trying to proxy. what i want to happen is i want
it to proxy by
realm first and if they don't have a realm then proxy by the number they dialed. and
as i understand
it the user file processed until a match is found..
with just this listed it will
Hi folks,
I have the problem with th freeradius
1.- I have already configured everything including the proxy.conf and my
freeradius is forwarding ok without any problem.
2.- Besides that I using the NTRadPing software in windows which help me a lot
to find out problems and it works without
Hi Again,
This is the only I could read from the radius.log file, maybe it may help to
depure my problem
Thu Jul 4 13:20:26 2002 : Error: rlm_sql: Stop packet with zero session
length. (user '', nas '166.114.22.13')
Thu Jul 4 13:20:31 2002 : Proxy: marking accounting server 200.62.4.23
When I make double entry with login test
in radius.log:
..
Auth: Login OK: [test/test] (from nas cisco port 71)
Auth: Login OK: [test/test] (from nas cisco port 70)
Error: Accounting-Request packet sent to a non-accounting port from client
cisco:1645 - ID 0 : IGNORED
Auth: Login OK:
Everything works.
Edit checkrad:
#! /usr/bin/perl
exit (1);
Radiusd reads radutmp and run checkrad, if double entry and it always
receive 1.
After that find, why don't work snmp-request to NAS (from SNMP_Session.pm)
-
List info/subscribe/unsubscribe? See
Cisco3640 IOS 12.2(8)T2
freeradius0.5 configure with support snmp
Perl 5.00503
BER.pm v0.88 SNMP_Session.pm v0.92 from www.switch.ch/misc/leinen
I made double entry with login test
Then make: checkrad -d cisco nas_ip nas_port login session_id
Returning 0 (login ok)
nas_port and
BORCHERS,JASON (HP-Roseville,ex1) [EMAIL PROTECTED] wrote:
I'm really at a loss here, and since I'm so new to RADIUS I have no idea
what to do next. I suspect I've missed an important step in setting up the
server. Does anyone have any ideas?
Read the FAQ?
Alan DeKok.
-
List
7.1 with radiusd-cistron-1.6.6.
Thanks a lot for your help.
--
Bertrand
TACHAGO
Computer specialist, Network
Information Specialist
SDNP SchoolNet Cameroon (237)221 25
53
Yaounde Cameroon
My
website: http://www.sdnp.cm/tachago/
running RH 7.1 with radiusd-cistron-1.6.6.
Thanks a lot for your help.
Wrong list. This is the freeradius list not the cistron radius list.
But perhaps you should switch to freeradius cause it's more stable and better than
cistron.
P.S.: could you please stop using HTML in your mails to a mailinglist
this problem?
I'm running RH 7.1 with radiusd-cistron-1.6.6.
Thanks a lot for your help.
Wrong list. This is the freeradius list not the cistron radius list.
But perhaps you should switch to freeradius cause it's more stable and better than
cistron.
P.S.: could you please stop using HTML
Hi everyone,
I need to set up a Freeradius server to act as an authenticator for network
switches. I'm very new to Linux and RADIUS, and am having trouble.
I've downloaded and installed version 0.5. I added a switch to the
clients.conf file, and then configured the switch to use the
On Sun, 23 Jun 2002 06:26:08 +0200, [EMAIL PROTECTED] wrote:
Subject: PLease help me with my freeradius and my MYSQL
Date: Sat, 22 Jun 2002 05:35:34 -0400
Reply-To: [EMAIL PROTECTED]
already have a table usergroup as you can see:
mysql select * from usergroup;
++--+---+
| id
hello freeradius users;
thanks a lot rust, but please forgive me because I forgot to mention that I
already have a table usergroup as you can see:
mysql select * from usergroup;
++--+---+
| id | UserName | GroupName |
++--+---+
| 1 | paulin | dynamic
Dear Simon,
I, was following all the mailing list with the subject (Problems with MySQL
Auth-Type), but I get a problem which I can't figure it out what's the cause,
I'm sure you can help me.
To help you understend what I have configured I'm putting the most relevant
parts of my
Hello Gonzalo,
You must add user 'paulin' into usergroup table
insert into usergroup (UserName,GroupName) values ('paulin','dynamic');
Also better use crypted passwords for PAP
in radiusd.conf change
pap {
encryption_scheme = crypt
}
and insert user into
Edit etc/raddb/radiusd.conf to suit your needs.
i have installed 7.1 red hat linux in my system and i am not able to find
etc/raddb/radiusd.conf since /raddb directory is not found in my installation. what
may the problem for this. Any one can help me out in this .
Thanks in Advance
Regards
i have installed 7.1 red hat linux in my system and i am not able to find
etc/raddb/radiusd.conf since /raddb directory is not found in my installation. what
may the problem for this. Any one can help me out in this .
peep in /usr/local/*
Thanks in Advance
Regards
Venkata Krishnan
s.venkata krishnan [EMAIL PROTECTED] wrote:
i have installed 7.1 red hat linux in my system and i am not able to
find etc/raddb/radiusd.conf since /raddb directory is not found in my
installation. what may the problem for this. Any one can help me out
in this .
Read the messages produced
alienoid [EMAIL PROTECTED] wrote:
I set up auth with freeradius0.5 + Oracle8.1.7 RH7.2. It works
well. But when I issue a command: echo User-Name = test,
Acct-Status-Type = Start | radclient -x 192.168.1.1:1646 acct DDD
I get Segmentation fault in freeradius.
See 'doc/BUGS'
Alan DeKok.
who need it ?
PLEASE HELP.
Regards,
Michael Fuller
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi folks,
I'm trying to define radius default groups, based on an LDAP directory.
The group information used to determine the profile of the user should be
checked against a LDAP attribute, called profilad.
But things are always more complicated than they seem :-))) So any help will
be highly
than they seem :-))) So any help will
be highly appreciated :-)))
Here is the main LDAP organisation :
O=Myorg
|_ OU=region
|_ CN=User Name
|_ cn=userid (attribute used for authentication)
|_ ...
|_ profilad=value (attribute that should be used for group
Sorry for previous letter!
We have USR NETServer/16.
I have compiled and installed FreeRadius-0.5 under RH 7.2
user entry:
test Auth-Type := Local, User-Password := test
Service-Type = Administrative-User
radius.conf:
port = 1645
When I telnet to netserver I saw these
Ruslan Spivak [EMAIL PROTECTED] wrote:
I have compiled and installed FreeRadius-0.5 under RH 7.2
user entry:
test Auth-Type := Local, User-Password := test
Service-Type = Administrative-User
radius.conf:
port = 1645
When I telnet to netserver I saw these multiple
I have just downloaded FreeRadius 0.5. and am trying to compile it on
Solaris 8 for Sparc with the following option
changes --localstatedir=/var --sysconfdir=/etc. I can run the configure
command and everything is ok but when I run make I
get the following errors
gcc -g -O2 -D_REENTRANT
At 10:52 AM 5/28/2002 -0400, Russell Premont wrote:
I have just downloaded FreeRadius 0.5. and am trying to compile it on
Solaris 8 for Sparc with the following option
changes --localstatedir=/var --sysconfdir=/etc. I can run the configure
command and everything is ok but when I run make I
get
I am running FreeRADIUS 0.4 with PostgreSQL backend, it's been running
great. I am now required to add Ascend-Data-Filter (s). After reading
the documentation I came up with the following:
The following in /usr/local/freeradius/etc/raddb/attrs
DEFAULT
Service-Type == Framed-User,
Lists [EMAIL PROTECTED] wrote:
I am running FreeRADIUS 0.4 with PostgreSQL backend, it's been running
great. I am now required to add Ascend-Data-Filter (s). After reading
the documentation I came up with the following:
The following in /usr/local/freeradius/etc/raddb/attrs
DEFAULT
At 02:16 PM 5/28/2002 -0700, Lists wrote:
I am running FreeRADIUS 0.4 with PostgreSQL backend, it's been running
great. I am now required to add Ascend-Data-Filter (s). After reading
the documentation I came up with the following:
The following in /usr/local/freeradius/etc/raddb/attrs
8 snip
Chris Parker [EMAIL PROTECTED] wrote:
This is not 'users'. This is 'attrs'. The operators specified were
correct for that usage, apart from the Data-Filter ones, which should
have been := ( Set Operator ). :)
Whoops, sorry. I skimmed the message too quickly, I think.
Alan DeKok.
-
401 - 500 of 617 matches
Mail list logo