Charlie B wrote:
Actually for Fedora/Redhat and yes it would contain radtest and now
upgraded to radmin but I'm looking for the package, I looked to build
the rpm from freeradius-server-2.1.1.tar.gz but was unable to for the
utils, so thought I would ask to see were I could grab them
Fedora has
Hi All,
Please don't forget that radius is UDP, and telnet TCP - firewall
might be protocol specific and the fact that you can't telnet to port
1812 doesn't mean you can't use radius.
kind regards
Pshem
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Then try to telnet (port 1812) from access point to server. If you can't
- problem is firewall. If you can - you haven't configured radius on AP
properly.
Ivan Kalik
Kalik Informatika ISP
Dana 25/9/2008, "Martin Silvero" <[EMAIL PROTECTED]> piše:
>Yes, tried to ping and responds quickly and wit
maybe its a hotspot issue , i had one with some Mikrotik Hotspot and
had to do an IP - Hotspot - IP Binding.
theorically its a NAT issue
2008/9/25 <[EMAIL PROTECTED]>:
> Can you ping the radius server from the access point. This is a
> networking issue - nothing to do with radius.
>
> Ivan Kalik
the patch that rgreiner supplied worked , so i dont have that
installation anymore and cannot test for the -x.
2008/9/25 <[EMAIL PROTECTED]>:
> Hi,
>> i`ve tried in a test environment with root uid/gid and no probs with
>> read/write conf/log files.
>> so it works ok in debug mode ( tested from
Yes, tried to ping and responds quickly and without losses. Also I did from
the server and also responds.
What could be the problem?
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Have you uncommented sql anywhere (authorize etc)?
Ivan Kalik
Kalik Informatika ISP
Dana 25/9/2008, "Ing. Alfonso Reyes"
<[EMAIL PROTECTED]> piše:
>
>Message: 3
>Date: Thu, 25 Sep 2008 19:56:36 +0100
>From: [EMAIL PROTECTED]
>Subject: Re: ..::Errors initializing modules::..
>To: FreeRadius user
Can you ping the radius server from the access point. This is a
networking issue - nothing to do with radius.
Ivan Kalik
Kalik Informatika ISP
Dana 25/9/2008, "Martin Silvero" <[EMAIL PROTECTED]> piše:
>in fact this IP (10.0.42.250) is another network which is connected to the
>notebook, which
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Venkat,
Sorry for the response lag; I just noticed your post when searching for
the same issue before realizing the problem.
Was your server.key really created with the password "whatever"? (Check
your .../raddb/certs/server.cnf file for the "input_p
Ok,
that made it work here.
Tks.
Roberto
Alexandre Chapellon wrote:
> Sorry i made a mistake with my patch:
>
> --- 01-radiusd-to-freeradius.dpatch2008-09-24 22:41:26.0 -1000
> +++ 01-radiusd-to-freeradius.dpatch.new2008-09-25
> 09:41:05.0 -1000
> @@ -35,7 +35,7 @@
> -#
Hi,
> i`ve tried in a test environment with root uid/gid and no probs with
> read/write conf/log files.
> so it works ok in debug mode ( tested from another pc with ntradping ) .
yes, i dont care about successful test with root in a test
environment - what fails in the real environment? eg what
Hi,
> Thanks for your help Alan, but the radius server was built with the
> --with-mysql variable with no luck.
err, it builds by default with MySQL - no need for
that configure flag.
once again, I will ask you, read the output when you
run the ./configure - dump it to a file if you cannot
sc
Message: 3
Date: Thu, 25 Sep 2008 19:56:36 +0100
From: [EMAIL PROTECTED]
Subject: Re: ..::Errors initializing modules::..
To: FreeRadius users mailing list
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset=us-ascii
Hi,
> But I can't see that on the radiusd -X output, I'
Sorry i made a mistake with my patch:
--- 01-radiusd-to-freeradius.dpatch2008-09-24 22:41:26.0 -1000
+++ 01-radiusd-to-freeradius.dpatch.new2008-09-25 09:41:05.0
-1000
@@ -35,7 +35,7 @@
-# e.g.: kill -HUP `cat /var/run/radiusd/radiusd.pid`
+# e.g.: kill -HUP `cat /var
You don't have to delete the debian patch.
Changing the user seems to have been corrected and so it's now
unnecessary, but a new "bug" appeared in the patch as radiusd.conf
seems to have been modified.
here is a little diff showing what to change in the patch so it works
(well works for me anywa
Alan DeKok a écrit :
> Alexandre Chapellon wrote:
>
>> Is it possible to use the same sqlippool database for different
>> freeradius servers that belong to a "cluster?
>>
>
> Yes. Just create an SQL cluster, and point the servers at the cluster.
>
>
>> Is there drawback, doing this?
i`ve tried in a test environment with root uid/gid and no probs with
read/write conf/log files.
so it works ok in debug mode ( tested from another pc with ntradping ) .
2008/9/25 <[EMAIL PROTECTED]>:
> Hi,
>> i deleted the patch 01 line from the 00 file. but freeradius doesnt
>> starts in norma
Hi,
> i deleted the patch 01 line from the 00 file. but freeradius doesnt
> starts in normal mode.no errors,no open UDP,TCP port
> ( netstat -ntlp and netstat -nulp dont show nothing like 1812 ,1813 )
> , but in debug mode it`s ok.
its unable to read config files or unable to write to the
logfil
Hi,
> But I can't see that on the radiusd -X output, I've double checked
> everything with no luck. Even if I'm trying the radtest with a user that is
> on mysql the radius send a reject packet.
> I can see on the output that the password doesn't match but I tried with a
> new one getting the same
i deleted the patch 01 line from the 00 file. but freeradius doesnt
starts in normal mode.no errors,no open UDP,TCP port
( netstat -ntlp and netstat -nulp dont show nothing like 1812 ,1813 )
, but in debug mode it`s ok.
2008/9/25 Alan DeKok <[EMAIL PROTECTED]>:
> orion wrote:
>> and then fakero
Hi,
> Actually for Fedora/Redhat and yes it would contain radtest and now upgraded
> to radmin but I'm looking for the package, I looked to build the rpm from
> freeradius-server-2.1.1.tar.gz but was unable to for the utils, so thought I
> would ask to see were I could grab them
FreeRADIUS has onl
Hi Alan and list,
First of all I want to apologize for that mistake, now everything is working
if I use the text file.
The thing is that I'm trying to use mysql and according to the web page
(http://wiki.freeradius.org/SQL_HOWTO) I should see the sql module loading:
Module: Loaded SQL
rlm_sql (
Actually for Fedora/Redhat and yes it would contain radtest and now upgraded
to radmin but I'm looking for the package, I looked to build the rpm from
freeradius-server-2.1.1.tar.gz but was unable to for the utils, so thought I
would ask to see were I could grab them
>
> I'm guessing that the debi
Hi,
> Charlie B wrote:
> > Awesome, can you tell where to find the freeradius-utils-2.1.1?
I'm guessing that the debian folk have split FreeRADIUS
up into 3 packages or somesuch - so the utils would contain
radtest etc ? in this case, 2.1.1 utils would probably
contain radmin. its very sick.
al
in fact this IP (10.0.42.250) is another network which is connected to the
notebook, which I have done now is to disconnect from the network and try to
connect to the radius of the outcome this time is that in the radius server
does not There is movement and the tool NTRadPing I get: "no response f
Charlie B wrote:
> Awesome, can you tell where to find the freeradius-utils-2.1.1?
What's that?
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Martin Silvero wrote:
> Thu Sep 25 12:49:16 2008 : Debug: Ignoring request to authentication
> address * port 1812 from unknown client 10.0.42.250
Well... did you add that IP as a client in raddb/clients.conf?
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/
Awesome, can you tell where to find the freeradius-utils-2.1.1?
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
The firewall is disabled, and probe with the tool NTRadPing and the result
in the radius is as follows:
Thu Sep 25 12:49:16 2008 : Debug: Ignoring request to authentication address
* port 1812 from unknown client 10.0.42.250 port 1083
Thu Sep 25 12:49:16 2008 : Debug: Ready to process request
any firewall ?
try with ntradping ( free tool to test radius )
2008/9/25 Martin Silvero <[EMAIL PROTECTED]>:
> Good morning!
>
> I am with a new problem, I feel like I'm close.
>
> My problem now is that set in a notebook the connection to authenticate with
> tls but not connecting, I am not showi
Good morning!
I am with a new problem, I feel like I'm close.
My problem now is that set in a notebook the connection to authenticate with
tls but not connecting, I am not showing any error, just does not connect,
you run into the radius with "-x" and is waiting for requests.
Why is this wrong?
Alan DeKok schrieb:
Norbert Wegener wrote:
Building Suse rpms on 10.3 I get the following error:
Err... the spec file is re-building the "configure" script? Why?
+ autoreconf
okay, after commenting autoreconf out in the specfile everything builds
as expected.
Thanks
Nor
orion wrote:
> isnt there a way to fix it ? :)
Find someone who understands debian && supply a patch.
I run a debian system locally, but I've never managed to create a .deb
file for the server. There's always some magic dependency that makes
me walk away from it.
Alan DeKok.
-
List info/
Hi,
> How can I able to revert back to my earlier FreeRadius Version 2.0.5 to
> come out of this backtrace problem ?
download 2.0.5 tarball from freeradius.org, extract it,
build it, then install it.
alan
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
about the official debian release they are far behind ( security ,
testing proccess )
2008/9/25 orion <[EMAIL PROTECTED]>:
> isnt there a way to fix it ? :)
>
> 2008/9/25 Alan DeKok <[EMAIL PROTECTED]>:
>> orion wrote:
>>> and then fakeroot dpkg-buildpackage -b -uc
>>> but still the error occur
>
isnt there a way to fix it ? :)
2008/9/25 Alan DeKok <[EMAIL PROTECTED]>:
> orion wrote:
>> and then fakeroot dpkg-buildpackage -b -uc
>> but still the error occur
>
> Then delete the patch. Or, wait for an official debian release.
>
> Alan DeKok.
> -
> List info/subscribe/unsubscribe? See htt
orion wrote:
> and then fakeroot dpkg-buildpackage -b -uc
> but still the error occur
Then delete the patch. Or, wait for an official debian release.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Thanks Alan, I will delete all files and Install 2.1.1.
SYED
On Thu, Sep 25, 2008 at 3:01 PM, Alan DeKok <[EMAIL PROTECTED]>wrote:
> Syed Anwarul Hasan wrote:
> > Yes Alan I have done a big mistake, I have updated to 2.0.6 with the
> > same binaries of 2.0.5. And now again I am getting
> > bac
tried to install the 2.1.1 on debian etch changing/without changing
the debian/patches/01-radiusd-to-freeradius.dpatch
-#user = nobody
-#group = nobody
to
-#user = radius
-#group = radius
and then fakeroot dpkg-buildpackage -b -uc
but still the error occur
Error
"applying patch 01-radiusd-to
Syed Anwarul Hasan wrote:
> Yes Alan I have done a big mistake, I have updated to 2.0.6 with the
> same binaries of 2.0.5. And now again I am getting
> backtraces. Anow in /etc/raddb dir I have another module radiusd which
> was not present in 2.0.5. and version file shows 2.0.6
There is no ve
Norbert Wegener wrote:
> Building Suse rpms on 10.3 I get the following error:
Err... the spec file is re-building the "configure" script? Why?
> + autoreconf
...
> configure.in:547: error: possibly undefined macro: AC_LIB_READLINE
> If this token and others are legitimate, please use m4
You can build a new version of freeradius under cygwin if you know how
to. Or wait until people from freeradius.net do that for you.
Ivan Kalik
Kalik Informatika ISP
Dana 25/9/2008, "Jelena Žagar" <[EMAIL PROTECTED]> piše:
>Yes, all parameters except allow_codechange and allow_idchange are
>rec
Yes Alan I have done a big mistake, I have updated to 2.0.6 with the same
binaries of 2.0.5. And now again I am getting backtraces. Anow in
/etc/raddb dir I have another module radiusd which was not present in
2.0.5.and version file shows 2.0.6
using CVS , I have done source checkout radiusd modu
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Building Suse rpms on 10.3 I get the following error:
rpmbuild -ba freeradius.spec
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.73764
+ umask 022
+ cd /usr/src/packages/BUILD
+ cd /usr/src/packages/BUILD
+ rm -rf freeradius-server-2.1.1
+ tar -xf -
+
Yes, all parameters except allow_codechange and allow_idchange are
recognised.
What to do?
Sincerelly,
Žagar Jelena
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
On Behalf Of [EMAIL PROTECTED]
Sent: Thursday, September 25, 2008 1:59 PM
To: FreeRadius users mailing l
It's not very likely that allow_codechange was supported in that
freeradius version then. If you change number of connections - that does
change?
Ivan Kalik
Kalik Informatika ISP
Dana 25/9/2008, "Jelena Žagar" <[EMAIL PROTECTED]> piše:
>I add the allow_codechange in jradius module in radiusd.co
Dario Palmisano wrote:
> I downloaded the 2.1.1 just released and after few (name) changes to the
> package, I tried to produce the corresponding rpm on a system running Red Hat
> Enterprise Linux Server v., but the compilation stopped with the following
> lines.
You're building it on a syste
Hello,
I downloaded the 2.1.1 just released and after few (name) changes to the
package, I tried to produce the corresponding rpm on a system running Red Hat
Enterprise Linux Server v., but the compilation stopped with the following
lines.
Thanks for any help
Regards
Dario
/usr/bin/libtool
>I installed FreeRadius on the Windows machine.
Is freeradius.net up again? This looks like 1.1.x debug of seriously
edited radiusd.conf. I would try adding jradius to the default
configuration without deleting everything else.
Ivan Kalik
Kalik Informatika ISP
-
List info/subscribe/unsubscribe?
A workaround for the Makefile would be to add:
CA_DEF_DAYS = `grep default_days ca.cnf | sed 's/.*=//;s/^ *//'
to the Makefile and change line 55:
ca.key ca.pem: ca.cnf
openssl req -new -x509 -keyout ca.key -out ca.pem -days
$(CA_DEF_DAYS) -config ./ca.cnf
This has worked for me. I've
Version 2.1.1 has been put on the web && ftp sites. The focus of this
release is stability.
That being said, "radmin" has a whole raft of new features. It's
approaching a complete administration interface for the server.
We've also added more WiMAX support. It has been tested to be
inter
I add the allow_codechange in jradius module in radiusd.conf file as you can
see:
# configure the rlm_jradius module
jradius {
name = "example" # The "Requester" name (a single
# JRadius server can have
52 matches
Mail list logo
