disconected after one second

2013-04-04 Thread Łukasz Kopiszka
Hi, I have strange problem host can't receive IP becouse he get Acct-Status-Type = Stop Acct-Update-Reason = AAA_LOAD_ACCT_SESSION_DOWN after one second before: Acct-Status-Type = Start Acct-Update-Reason = AAA_LOAD_ACCT_SESSION_UP short log: Sending Access-Accept of id 126 to

disconected after one second

2013-04-04 Thread Łukasz Kopiszka
Hi, I have strange problem host can't receive IP becouse he get Acct-Status-Type = Stop Acct-Update-Reason = AAA_LOAD_ACCT_SESSION_DOWN after one second before: Acct-Status-Type = Start Acct-Update-Reason = AAA_LOAD_ACCT_SESSION_UP short log: Sending Access-Accept of id 126 to

Re: disconected after one second

2013-04-04 Thread Phil Mayers
On 04/04/13 14:17, Łukasz Kopiszka wrote: Everything was working great until I change something but I don't remember what was it :) That's unfortunate. I suggest you look into using version control for your configs. Anyway, the NAS is the one doing the disconnect - you should debug this

Re: MAC Address Auth

2013-04-04 Thread Mulindwa
Hi All, Have been trying to authenticate my ADSL users using Mac Address Auth, however i have failed even after going through the documentation. I want to authenticate with the highlighted, anyone done this and can help? Thanx This is how the accounting file looks; User-Name = user2000@ut3   

Re: MAC Address Auth

2013-04-04 Thread Alan DeKok
Mulindwa wrote: Hi All, Have been trying to authenticate my ADSL users using Mac Address Auth, however i have failed even after going through the documentation. I want to authenticate with the highlighted, anyone done this and can help? It's been done. This is how the accounting file

Re: MAC Address Auth

2013-04-04 Thread Mulindwa
Thanks Alan, Let me do so.   Eric M From: Alan DeKok al...@deployingradius.com To: Mulindwa meri...@yahoo.com; FreeRadius users mailing list freeradius-users@lists.freeradius.org Sent: Thursday, April 4, 2013 4:47 PM Subject: Re: MAC Address Auth Mulindwa

Re: MAC Address Auth

2013-04-04 Thread Mulindwa
Great, i have run the debug and i did get the attribute required. If i want to full fill the two conditions i.e username/passwd and Mac Address = Attr-2352-145 How would i need to twick my radiusd.conf file to achieve this? User-Name = user2000@ut3    CHAP-Password = cccddd'    

SV: disconected after one second

2013-04-04 Thread Alexander Silveröhrt
Hard to know what you missconfigured but...i can give you some usual suspects maybe.. Also can you post a show subscribers active all while trying to auth. Also debug with Term mon debug aaa rad-attr debug rad-packet Your forward policy looks wicked Forward-Policy == in:CLIPS-DEFAULT are you

Re: MAC Address Auth

2013-04-04 Thread Matthias Nagel
Hello, add the correct check item to your user database. In the case below (User-Name = user2000@ut3) you should have the check item Attr-2352-145 == 5c-7d-5e-3f-d0-f7 for this speicifc user in your user database. Then you repeat this for every user/mac-address pair you want. Best regards,

Re: disconected after one second

2013-04-04 Thread Łukasz Kopiszka
Moore debug show log fac aaa: Apr 4 17:43:26: %AAA-7-RADIUS: rad_mgr, Process radius requests in db request queue Apr 4 17:43:26: [0258]: [2/1:511:63:31/7/2/855]: %AAA-7-RADIUS: aaa_idx 5358: rad_process_aaad_req: Receive request (Authentication) Apr 4 17:43:26: [0258]:

Re: disconected after one second

2013-04-04 Thread Łukasz Kopiszka
Moore debug show log fac aaa: Apr 4 17:43:26: %AAA-7-RADIUS: rad_mgr, Process radius requests in db request queue Apr 4 17:43:26: [0258]: [2/1:511:63:31/7/2/855]: %AAA-7-RADIUS: aaa_idx 5358: rad_process_aaad_req: Receive request (Authentication) Apr 4 17:43:26: [0258]:

Re: disconected after one second

2013-04-04 Thread Phil Mayers
On 04/04/13 16:57, Łukasz Kopiszka wrote: Moore debug show log fac aaa: Please take the Cisco debugging somewhere else, like a Cisco list (or to private emails). - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

Groupname is not written in the table radacct

2013-04-04 Thread Geovanny Varela
Hi. I need the groupname field radacct table is informed. Configured in Section Accounting_stat_query in File dialup.conf the groupname field and value '% {SQL-Group}' according to information obtained on the internet but got no success. I can appreciate a solution because of the success of my

Re: Groupname is not written in the table radacct

2013-04-04 Thread Phil Mayers
That's not how it works. Sql-group is a virtual attribute that only exists when you're checking it, and is multi-valued. You can't record it in accounting packets - that doesn't make sense. What you *can* do is copy a matching group to an attribute that is recorded in accounting, such as

Radwho doesn't show full name

2013-04-04 Thread mkeram
Hello, I have installed Debian Squeeze 6.0 with freeradius 2.1.10 + accel-ppp (PPPoE). Everything is working fine, but radwho and radwho -s doesn't return full username fetched from /etc/passwd. All users have real linux account and proper entry in /etc/freeradius/users. All details login and