Re: Howto rlm_sqlippool ?

Nobody has some hints for my issues (see below) ? Some hints would be really great Regards Michael Original-Nachricht Datum: Tue, 18 Jul 2006 11:43:23 +0200 Von: Michael Kopp [EMAIL PROTECTED] An: freeradius-users@lists.freeradius.org Betreff: Howto rlm_sqlippool ? Hi

Howto rlm_sqlippool ?

Hi together, I configured freeradius 1.1.2 with ip-pools. Everything works fine so far. But now I want to use rlm_sqlippool module to change from flat files to mysql database for my ip pools (to achive greater performance, hopefully) So far I have compiled the rlm_sqlippool and the module

returning variable as HEX in Access-Accept

Hi all, I have maybe a strange request OK I receive some Attributes in Access-Request and I have to return the HEX values of the received Attribute back to the NAS within the Access-Accept message. For example I receive for instance Framed-MTU = 1500 in Access-Request and now I have to put

rlm_attr_rewrite and rlm_ippool issue

Hi all, we are facing a issue with rewriting NAS-Port AVP before passing it to the rlm_ippool module. As our NAS system is a little bit dump and always sets NAS-Port to 0. (we won`t get a fix from the NAS vendor in a timly manner) we have to rewrite the NAS-Port on the Freeradius server, before

Dynamic IP Pools on Freeradius

Hi all, sorry to bother you, I searched all on google but didn`t find a solution, either it is not designed as I think or I misunderstand something So here the story : I have to assign IP addresses via dynamic pools on Freeradius and via some local pool on NAS. (requirement) So I added in

Re: Dynamic IP Pools on Freeradius

on Freeradius Reply-To: freeradius-users@lists.freeradius.org rlm_ippool requires that the packet contain NAS-IP-Address and NAS-Port. Are you sending those attributes? If not, you may need to modify rlm_ippool to uniquely identify a user by something else. On Wed, 2 Feb 2005, Michael Kopp wrote

Accounting without storing the data

Hi all, maybe somewhat unusal request : How could I setup freeradius in order to answer accouting radius packets but don`t record them anywhere Currently when i comment out all entries in the accounting section, then the radius server is not answering accounting packets at all. (and I think it is

Re: Authorization via LDAP and Files, Authentication via LDAP

From: Alan DeKok [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Re: Authorization via LDAP and Files, Authentication via LDAP Date: Sat, 16 Oct 2004 12:40:53 -0400 Reply-To: [EMAIL PROTECTED] Michael Kopp [EMAIL PROTECTED] wrote: I installed Freeradius 0.9.3 on the same box, and did

Re: Authorization via LDAP and Files, Authentication via LDAP

Alan DeKok aland[AT]ox.org wrote: Michael Kopp michael.kopp[AT]gmx.net wrote: radiusd.conf[1559] Unknown configuration directive ldap in authorize section. ... ldap{ Try putting a space in between ldap and { Alan DeKok. hmm, same error as before

Re: Authorization via LDAP and Files, Authentication via LDAP

have to look in order to fix it (I`m not very expirienced in programming ) Regards Michael Alan DeKok aland[AT]ox.org wrote: Michael Kopp michael.kopp[AT]gmx.net wrote: radiusd.conf[1559] Unknown configuration directive ldap in authorize section. ... ldap{ Try

Re: Authorization via LDAP and Files, Authentication via LDAP

Hi Kostas, hi list, I did what you suggested, but I still got a error, please see : gaia:/usr/local/etc/raddb# radiusd -X Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /usr/local/etc/raddb/proxy.conf Config: including file:

Authorization via LDAP and Files, Authentication via LDAP

Hi all, I have some problems getting Freeradius to work with following configuration : Freeradius should check if user exists in LDAP and also should authenticate user via LDAP. As we are not planning to integrate the the RADIUS-LDAPv3.schema and therefore want to add Return-Attributes via users

different LDAP attribute mappings

Hi all, I searched archives and most of doc directoy of freeradius, but couldn`t find the answer. Wat I want to achive - I want to have user authentication LDAP server with ntpassord/lmpassword for PEAP-MSCHAPv2 and have MD5 userpassword attribute in LDAP for all the other authentication