for failing: : un recognized value specified in *
/usr/share/freeradius/dictionary.chillihotspot*
Thanks / Regards
RM --
On Tue, Oct 8, 2013 at 3:38 PM, Arran Cudbard-Bell
a.cudba...@freeradius.org wrote:
On 8 Oct 2013, at 15:40, Russell Mike radius@gmail.com wrote:
Dear Arran C. Bell
on frequent
basis. base on the output from the counter module (ok,noop,etc..), i
understand how to update the reply from un-lang to log off user.
Thanks / Regards
RM--
On Wed, Oct 9, 2013 at 1:12 PM, Alan DeKok al...@deployingradius.comwrote:
Russell Mike wrote:
All-In-MB counter works. Please note
Thanks Alan D
understood. I will use unlang in accounting.
Thanks
On Wednesday, October 9, 2013, Alan DeKok wrote:
Russell Mike wrote:
So if you want to do something when the users traffic is over the quota,
you have to do it in the accounting section.
Could you please kindly indicate
Hi List Members
i have been reading archives and tying to understand for some days now, but
unsuccessful. i am currently working to extend data volume control up to
10GB, which is requirement for the organization. Is anyone able to manage
more then 4GB using CoovaChilli Freeradius? Since there
Dear Arran C. Bell,
Thank you very much, i am extremely grateful for your advise and guidelines
for troubleshoot also. i am currently experimenting a different
rlm_sqlcounter using CoovaChilli dictionary All-In-MB. In result, i can
store short number in db. This counter would reset at 2TB with
Hi,
I am willing to help, What kind of NAS do you use? Does your NAS support
accounting ?
Thanks
RM --
On Mon, Aug 12, 2013 at 9:50 PM, lucia j.esko...@gmx.de wrote:
Thanks for quick reply,
well I guess not. Can you give me a hint how I can figure it out how I can
configure this ?
I'm I
Hi List
is anyone able to implement top up for hotspot vouchers ? Top up means, if
a hotspot user is browsing and his 3600 seconds are getting finish. he wish
to top up another 1800 seconds to avoid disconnection.
Thanks / Regards
-
List info/subscribe/unsubscribe? See
Yes, i have come across this error once. there is little mistake in your
unlang code. understand form following working code.
## Authorization Area Starts Here
# If user not present allow them free access
# Between 10:00 and 12:59PM ('Any1000-1259')
# Whole Day ('Any-2359')
Hi, It is not default virtual server). Following error occurs, when user
attempt to login with invalid password, otherwise not. is it normal? or
should be troubleshooted.
Info: WARNING: Unknown value specified for Post-Auth-Type. Cannot
perform requested action
My postauth section
post-auth
. is it even posible to control that (Max-All-Session) using unlang
code ?
Thanks / Regards
--RM
On Wed, Jun 5, 2013 at 4:17 PM, Alan DeKok al...@deployingradius.comwrote:
Russell Mike wrote:
Hi John Alan, Kindly clarify
This isn't a private list. Messages should NOT be addressed
Hi,
On Wed, Jun 5, 2013 at 7:43 AM, Miha m...@softnet.si wrote:
Hi,
how does freeradius calculate duration time?
MySQL query grabs the information from radacct
i.e.
sqlcounter forevertimecounter {
counter-name = Max-All-Session-Time
check-name =
Dear Alan DeKok John Dennis
Thanks for your input, words and clarification. Explanation was very good.
Moreover, good to have people like you on the list.
Regards
Prabhpal Singh
On Wed, Jun 5, 2013 at 1:34 PM, Alan DeKok al...@deployingradius.comwrote:
John Dennis wrote:
You're both right,
Hi John Alan, Kindly clarify
Does this means, it is posible to use only authorize function of FR and
process all authentication requests with following virtual server?
1.
server accept_all_requests {
authorize {
update control {
On Wed, Jun 5, 2013 at 4:17 PM, Alan DeKok al...@deployingradius.comwrote:
Russell Mike wrote:
Hi John Alan, Kindly clarify
This isn't a private list. Messages should NOT be addressed to
individual people.
Apologies Everyone. Well noted for future
Just reply to a message. It's
* | | := | *Accept * |
| 67 | *41.157.61.30* | | := | *Reject*|
Thanks Everyone
Regards
--RM
On Tue, May 28, 2013 at 4:12 PM, Alan DeKok al...@deployingradius.comwrote:
Russell Mike wrote:
Dear Mulindawa / Marinal Alan Dekok
Thanks you very much for your advice, very
Dear FreeRadius Gurus Greetings,
I work with an ISP, i have been asked to research about service
provisioning using AAA. I am NOT very new to FreeRadius. Have implemented
and managing central CoovaChilli hotspot solution where we run more than 35
hotspots across the city using CoovaChilli +
:
Russell Mike wrote:
Currently, We do manually connection / disconnection. If a customer did
not pay until 31st, somebody manually disconnect the link. And manually
connect when customer comes to pay.
That's what Session-Timeout is for. Set it to 1 day (86400 seconds).
That way they have
On Sun, May 5, 2013 at 6:51 PM, ch2...@arcor.de wrote:
Von: Russell Mike radius@gmail.com
You said same setup is working with Coovachilli, same groups / profiles?
Else cross chech your reply check items, if in place. If FR groups are
same check NAS side.
Thanks
I'll check
You said same setup is working with Coovachilli, same groups / profiles?
Else cross chech your reply check items, if in place. If FR groups are
same check NAS side.
Thanks
On Friday, May 3, 2013, wrote:
Hi,
Von: Russell Mike radius@gmail.com javascript:;
FR should be able to know
FR should be able to know if the allowed time used / consumed before it can
deny request. have you setup rlm_sqlcounter ?
Thanks RM --
On Fri, May 3, 2013 at 7:49 AM, ch2...@arcor.de wrote:
All,
I'm a newbie in radius.
I've setup freeradius with mySQL and max-daily-session. When I set
generating the DIGEST is an ACME SBC it supports a number of
DIGEST RFC's
Sorry for being a pain
Regards
Mike
-Original Message-
From: freeradius-users-bounces+mbrennan=thrupoint@lists.freeradius.org
[mailto:freeradius-users-bounces+mbrennan=thrupoint.com@lists.freeradius.o
rg] On Behalf
where you can use the
passsword_attribute
Or am I totally off track?
Thx
Mike
Note: The information contained in this message may be privileged and
confidential
and protected from disclosure. If the reader of this message is not the
intended
recipient
Hi Alan
Yes the password is in clear text.
Thx - I will let you know if I am successful
Regards
Mike
-Original Message-
From: freeradius-users-bounces+mbrennan=thrupoint@lists.freeradius.org
[mailto:freeradius-users-bounces+mbrennan=thrupoint.com@lists.freeradius.o
rg] On Behalf
-tunnel file I commented out the sql in the authorize section.
It seemed to work - see attached small snippet from my debug. In the
attached file there is still a rlm_sql_mysql: MYSQL check_error: 1146
received message
I have missed something else?
Thx again
Mike
-Original Message-
From
this and the error disappeared.
Thx for your help
Mike
-Original Message-
From: freeradius-users-bounces+mbrennan=thrupoint@lists.freeradius.org
[mailto:freeradius-users-bounces+mbrennan=thrupoint.com@lists.freeradius.o
rg] On Behalf Of Alan DeKok
Sent: 25 April 2013 16:20
To: FreeRadius
/ Regards
On Tue, Apr 16, 2013 at 5:42 PM, Alan DeKok al...@deployingradius.comwrote:
Russell Mike wrote:
Dear Alan D.
I may create a new rule. People who address mail to me personally get
unsubscribed.
Alan DeKok.
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org
Hi,
Can you please revise your question and put it in better way, i am not
clear, do some more typing. if captive portal (NAS) is CoovaChilli, this
works for me.
HS_RAD_PROTO=pap
Thanks / Regards
On Wed, Apr 17, 2013 at 11:51 AM, Chitrang Srivastava
chitrang.srivast...@gmail.com wrote:
I
Dear Arrran,
Thanks you very(32) much. Thats what i wanted to know if it is not FR
limitation.
Regards / RM --
On Wed, Apr 17, 2013 at 2:13 PM, Arran Cudbard-Bell
a.cudba...@freeradius.org wrote:
On 17 Apr 2013, at 05:27, Russell Mike radius@gmail.com wrote:
Hi Aran, thanks
Dear Alan D.
What Freeraidus is using currently as to keep track. Is it 64bit or 32bit.
Thanks / Regards
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Do you mean simultaneous session? If you using MySQL, Please check if
enabled under session section. Thanks
RM --
On Friday, April 5, 2013, Mehdi Ravanbakhsh wrote:
Hi All
my Session Section in site enable in not woking ! i do not have any log
about that section in my radius.log file .
Do
settings in Plan.
Regards,
Muhammad Nuzaihan Bin Kamal Luddin
On Mon, 2013-04-01 at 17:12 +, Russell Mike wrote:
Hi List,
i need to expire the prepaid card after three months of first login.
after reading mail achieves, i was able to figured out that i need to
use Expire-After
Because you have disable the valid check item Query using #
sqlcounter forevertimecounter {
counter-name = Max-All-Session-Time
check-name = Max-All-Session
count-attribute = Acct-Session-Time
reply-name = Session-Timeout
I've been running FR for a while w/ out issue. Windows 8, however fails, when using auto-config (selecting the network and letting Windows figure out supplicant settings). I believe it's failing b/c of: "[mschap] FAILED: MS-CHAP2-Response is incorrect"This only happens on Windows 8
Hi List,
i need to expire the prepaid card after three months of first login. after
reading mail achieves, i was able to figured out that i need to use
Expire-After FR attribute and value in seconds. i was bit of unclear how
to bring the module in to the action because i am unable to locate
Trying post again (hopefully html email turned off this time). If someone knows
how to delete a previous/duplicate post let me know.:
I've been running FR for a while w/ out issue. Windows 8, however fails, when
using auto-config (selecting the network and letting Windows figure out
supplicant
Debian, Ubuntu: freeradius -XXX
Redhat CentOS: radiusd -XXX
Thank / RM --
On Sat, Mar 30, 2013 at 9:12 AM, Mehdi Ravanbakhsh baba...@gmail.comwrote:
Hi All
if password in request is not correct wich module handele this and reject
the client?
where i can check if password is not correct
checkval can helpful when you need to apply NAS-identifier
Calling-Station-Id - FR attributes.
checkval calledstationid {
item-name = Called-Station-Id
check-name = Called-Station-Id
data-type = string
notfound-reject = no
}
checkval nasidentifier {
- Wed Mar 13 17:47:09 2013
I check the ldap.attrmap and its correctly mapped to the LDAP attribute.
So how to make sure that Radius reject the request when the MAC address is
not listed.. thats what i want to achieve
Thanks
Danny
On Wed, Mar 13, 2013 at 4:51 PM, Russell Mike radius
Hi Freeradius List,
Why someone will use Unix-Time-Based-Login why not Login-Time FR
attribute? Does it offer more flexibility or control over each other.
Actually, we want to implement login based on time. i am reading mail
archives since yesterday to understand basic functionality of the
Hi, Please mind my mistake
1.) Unix-Time-Based-Login using unlang rather than Login-Time FR
attribute.
On Tue, Mar 12, 2013 at 11:06 AM, Russell Mike radius@gmail.com wrote:
Hi Freeradius List,
Why someone will use Unix-Time-Based-Login why not Login-Time FR
attribute? Does it offer
Thanks Dear Arran. your input is very much appreciated. I will check on NAS
side.
Thanks
On Fri, Mar 8, 2013 at 4:30 PM, Arran Cudbard-Bell
a.cudba...@freeradius.org wrote:
On 8 Mar 2013, at 11:22, Russell Mike radius@gmail.com wrote:
Thanks Dear Alan D.
Good answer
Hi, note for ever. FR will simply ignore the request if NAS (client) in not
configured. As Mohammed has explained by giving full example earlier. when
your NAS will change in future and may need additional NAS support. You
need to define second client entry in the same file or in MySQL DB, only if
Hi FreeRadius List Members,
Thanks for all the support ever. i am having difficulty to understand
something, i need help. i am able to configure mac authentication base on
the following logic. it Works !!
username=mac address;attribute=Auth-Type;op=:=;value=Accept
username=mac
...@deployingradius.comwrote:
Russell Mike wrote:
*Question:* Redirecting Reject Request To Webpage
For example, a customer would get reject from FR due to non payment. but
at this stage customer do not know, what is happening. Why internet in
down. We want the request to redirected to a web page
Hi Arran,
Thanks for the answer to my question. Nothing wrong to say thanks but
perhaps to see it from that angle.
Regards / RM --
On Thu, Mar 7, 2013 at 3:12 PM, Arran Cudbard-Bell
a.cudba...@freeradius.org wrote:
On 7 Mar 2013, at 09:50, Russell Mike radius@gmail.com wrote:
Dear
On Sunday, February 24, 2013, Alan DeKok wrote:
Russell Mike wrote:
i also
came across where guys are discussing EAP and MAC authentication. i
could not conclude, if it is a better way of doing
MAC authentication using EAP.
To be clear: you don't. EAP is authentication. MAC
On Sun, Feb 24, 2013 at 2:20 PM, Alan DeKok al...@deployingradius.comwrote:
Russell Mike wrote:
Thanks for guidelines. exactly, as you stated I simple want to store MAC
address somewhere compair against the request. Can they be in
radcheck?
I wouldn't do that. Just create your own
On Sun, Feb 24, 2013 at 1:55 PM, David Peterson
dav...@wirelessconnections.net wrote:
I know of one person doing something similar to what you are looking to
do. If your NAS sends the MAC of the device with the EAP request, you can
extract the MAC from the request using unlang and check that
scheduling 500 home visits
was a worse option than writing some code to authorize the CPE.
** **
David
** **
*From:* Russell Mike [mailto:radius@gmail.com]
*Sent:* Sunday, February 24, 2013 10:00 AM
*To:* David Peterson-WirelessConnections; FreeRadius users mailing list
Greetings Dear Alan D. List Members,
First of all, thank you very much for developing such application. I need
help, i have functional Freeradius server with MySQL backend. i have been
asked to add MAC address authentication support for the servers. i googled
the topic and got many many mail
On Tue, Feb 19, 2013 at 11:08 AM, Phil Mayers p.may...@imperial.ac.ukwrote:
On 19/02/13 06:53, Russell Mike wrote:
Hi Phil Moby,
I am also interested in this solution since experiencing the same
problem. I liked the solution no1.
But I have no idea where I can get that script but I can
On Tue, Feb 19, 2013 at 11:23 AM, Mobin Yazarlou yazarlo...@gmail.comwrote:
On Tue, Feb 19, 2013 at 10:23 AM, Russell Mike radius@gmail.comwrote:
On Monday, February 18, 2013, Mobin Yazarlou wrote:
On Mon, Feb 18, 2013 at 9:50 PM, Phil Mayers p.may...@imperial.ac.ukwrote:
On 18/02
On Tue, Feb 19, 2013 at 5:28 PM, Phil Mayers p.may...@imperial.ac.ukwrote:
On 19/02/13 16:09, Russell Mike wrote:
*A.) *Enable interim accounting
Yes
*B.)* Enable
post-auth {
update reply {
Acct-Interim-Interval = 900
}
}
Yes
C.) *You Said:* You also need
On Monday, February 18, 2013, Phil Mayers wrote:
On 18/02/13 18:02, Mobin Yazarlou wrote:
Hi,
I am using freeradius v2.1.12 with MySQL support and noticed if a user
disconnect when radius server is down, NAS can not inform radius about
user being disconnected and radius assume user is
On Monday, February 18, 2013, Mobin Yazarlou wrote:
On Mon, Feb 18, 2013 at 9:50 PM, Phil Mayers
p.may...@imperial.ac.ukjavascript:_e({}, 'cvml',
'p.may...@imperial.ac.uk');
wrote:
On 18/02/13 18:02, Mobin Yazarlou wrote:
Hi,
I am using freeradius v2.1.12 with MySQL support and
On Fri, Feb 15, 2013 at 3:50 PM, a.l.m.bu...@lboro.ac.uk wrote:
Hi,
I am new to radius. I have installed the freeradius to my linux and
after
starting radiusd -X
I executed radtest tool for testing as below but it could not get
authenticated and Access-Reject returned.
There are many different things you are talking at the same time.
You want increase the response time of auth. Is your database indexed?
Thanks
On Tuesday, February 12, 2013, Muhammad Nadeem wrote:
thanks alan
Actually I am using load balancing for rapid authentication of users. let
suppose
Is there any layer 3 device between client and dhcp server? Then you need
dhcp relay agent, if that is not the case chk firewall.
Thanks
On Tuesday, February 12, 2013, Michele Pinassi wrote:
Hi all,
i've just installed a FreeRadius server 2.2.0 with DHCP support because
i need a dhcp server
what is output attributes ?
On Wed, Feb 6, 2013 at 10:19 AM, Lakshmi Narayana Baliah
lb0074...@techmahindra.com wrote:
Hi All,
How can configure output attributes in free-radius?
How do i do that ??? please help
Thanks
Lakshmi
On Wed, Jan 23, 2013 at 2:47 PM, Miha m...@softnet.si wrote:
Hi,
my radius client is sending with user-name and password aslo realm. I can
not disable sending realm, is it possible to configure radius that will not
user realm with user-name (user-name@realm)?
i only know that it is
1. I need to limit the user monthly usage, for example bandwidth 2Mbps with
5GB monthly usage.
1a.) You would not need script, you need RLM SQLCOUNTER to limit
daily/weekly/monthly traffic quota
1b.) you need to control the bandwidth using radius and radius client
attributes, such as
On Tue, Jan 22, 2013 at 10:17 AM, Sokphak TOUCH touch.sokp...@gmail.comwrote:
Thanks Russell for your respond. It would more appreciate if you can share
some document. At the mean time I will doing research about it.
Regards,
Sokphak
Understand the concept here, it is very easy with
Dear Alan D. List Users,
I am reposting this message only because it bounced last due to size error.
I tried to reduce the size but less information to see. Apologies if it was
sent but i received bounce and no response from any member.
---: Orignal Message : ---
I tried to
On Tue, Jan 8, 2013 at 12:05 AM, Alan DeKok al...@deployingradius.com
wrote:
Alan DeKok Wrote:
The sqlcounter module should be pretty simple. Configure accounting data
to go into SQL, and ensure that the server is receiving accounting packets.
Then, configure the sqlcounter module.
-9]+)+)$/) -
FALSE
++? if (User-Name =~ /^([^@]*)@([-A-Z0-9]+(\\.[-A-Z0-9]+)+)$/) - FALSE
++- entering else else {...}
+++[reply] returns noop
+++[reject] returns reject
++- else else returns reject
-Mike
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
{
Proxy-To-Realm := DEFAULT
}
}
With this configuration, I guess I don't need realm's LOCAL or NULL?
-Mike
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
helped though. Perhaps I need to increase the controller timeout further.
Around 67% of eduroam sites in the UK use freeradius
I assumed it should work better than it is.
-Mike
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
On Wed, 5 Dec 2012, John Dennis wrote:
On 12/05/2012 12:02 PM, Mike Diggins wrote:
On Wed, 5 Dec 2012, Alan Buxey wrote:
In the first instance, upgrade. There is a major security problem
with 2.1.x release. Get 2.2.x onto your system asap.
This is the RedHat RPM which I believe
= fail-over
home_server = proxy1
home_server = proxy2
}
realm mydomain.ca {
strip
}
realm LOCAL {
nostrip
}
realm NULL {
nostrip
}
realm DEFAULT {
pool = EDUROAM-FTLR
nostrip
}
-Mike
On Wed, 5 Dec 2012
or
max_request_time without some advice first. Any suggestions? I have no
control over the Home Servers or how long a request takes to complete and
I don't know what's causing the sanity check failure!?
-Mike
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
On 13/10/2012 3:50 AM, Eero Volotinen wrote:
2012/10/12 Francois Gaudreault fgaudrea...@inverse.ca:
On 2012-10-12 1:22 PM, Mike Diggins wrote:
Unable to read consumer identity
Because your RHN stuff appears to be broken.
note that some of freeradius stull are located in rhn-optional
channel
I installed the RedHat 6.3 freeradius-2.1.12-4.el6_3.x86_64 rpm earlier,
not realizing it didn't include mysql. However, I don't see a mysql
version available. Is there one that is updated by RedHat?
-Mike
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
That's odd, why am I only seeing freeradius?
# yum info freeradius\* | grep Name
Unable to read consumer identity
Name: freeradius
-Mike
On 12/10/2012 12:22 PM, John Dennis wrote:
On 10/12/2012 11:37 AM, Mike Diggins wrote:
I installed the RedHat 6.3 freeradius-2.1.12-4.el6_3.x86_64
[3825]: Login incorrect: [] (from
client wlc-6 port 13 cli 48-60-bc-f4-1d-31)
-Mike
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Can you run lsof to see what process has the port open?
On May 28, 2012 5:35 PM, Michael Aldridge aldridge@gmail.com wrote:
I recently had to install debian 6.0 on one of my servers after a hard
drive crash, and while I had freeradius running before, I can't seem to get
it running now.
I
Hello,
Is it possible store and access an ldap attribute in pre-proxy?
1. Attribute defined in dictionary
2. Attribute mapped in ldap.attrmap
2. Trying to access using:
pre-proxy {
If (%{reply:attributename} == cookies {
update proxy-reply {
Whatever = cookies
}}
}
the problem is the attribute
+0100
From: Phil Mayers p.may...@imperial.ac.uk
To: freeradius-users@lists.freeradius.org
Subject: Re: Ldap attribute in pre-proxy possible?
Message-ID: 4fad475c.7090...@imperial.ac.uk
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
On 11/05/12 16:39, Mike wrote:
Hello
Can anyone provide an answer? I have spent much time trying to make this work,
trying different things so if its not possible please let me know.
On 2012-05-08, at 5:05 PM, Mike lonetravel...@gmail.com wrote:
Hi guys,
I am setting an attribute in the auth section of my config . I am
Hi guys,
I am setting an attribute in the auth section of my config . I am able to
access the attribute in the same section and preform unlang operations on
said attribute, however, i am unable to access the same from the pre-proxy
section of my config. The attribute just expands as
) = 2011
GROUP BY username
This assumes you are using mysql for accounting.
Mike
On 25/02/12 17:49, Fazal Ahmed Malik wrote:
Hi,
Is there any tool or script with help of which I can get to know how
much data downloaded by all user in last 30 days.
Please share the solution.
Best
would I go about returning more than 1 or am I stuck because of perl?
Mike-
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Mike
FreeRADIUS Version 2.1.10, for host i386-unknown-openbsd5.0, built on
Aug 16 2011 at 10:46:39
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies
I just tried
radiusd -s
and it is 30 minutes up so far. Will report back overnight.
I am reluctant to upgrade since I prefer OpenBSD packages, but if it
comes right down to it, then I will.
Mike
On 15/02/12 17:47, Fajar A. Nugraha wrote:
On Wed, Feb 15, 2012 at 11:33 AM, Mikemike
there are alternatives for packages too eg
http://openports.se/net/freeradius
Thanks for that. I'll make a note for a rainy day.
Mike
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
is the value of adding the roots/intermediates to the
certificate file i.e certificate_file = ${certdir}/certificate.crt? Does
it really allow a client without the Root already installed to verify this
certificate?
-Mike
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list
On Mon, 9 Jan 2012, Phil Mayers wrote:
On 09/01/12 17:42, Mike Diggins wrote:
I use a Thawte Premium Server CA for my WPA2 Enterprise freeradius
authentication certificate currently. My eap.conf 'certificate file'
contains the certificate only, not the root and/or intermediates. That
seems
On Fri, 14 Oct 2011, Alan DeKok wrote:
Mike Diggins wrote:
Accounting feature on the WLAN controllers (for now), I noticed that a
similar failure is a happening on the Authentication side. Some
authentication requests proxied to other radius servers (via Eduroam)
are either failing or taking
to load
/usr/local/freeradius/etc/raddb/sites-enabled/default[339]: Failed to find
module replicate.
/usr/local/freeradius/etc/raddb/sites-enabled/default[336]: Errors parsing
accounting section.
-Mike
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
On Tue, 4 Oct 2011, Mike Diggins wrote:
I'm running FreeRadius 2.1.3 on RedHat Enterprise Linux configured as an
Eduroam Radius proxy server. My Cisco Wireless Lan Controllers are constantly
failing over the Accounting Servers, due to lack of response from the Home
Servers, or so says
On Wed, 5 Oct 2011, Arran Cudbard-Bell wrote:
On 5 Oct 2011, at 02:20, Mike Diggins wrote:
I'm running FreeRadius 2.1.3 on RedHat Enterprise Linux configured as an
Eduroam Radius proxy server. My Cisco Wireless Lan Controllers are constantly
failing over the Accounting Servers, due
, before marking it dead (at
least).
-Mike
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
the NAS on to the network. Once on the
network it is free to make DHCP requests or whatever and then get
routed accordingly. Only then does it get default gateway information
that it can use to connect to the internet so to speak.
I think that is correct.
Mike
On Wed, May 18, 2011 at 2:16 PM
the command line just fine.
I thought it might be as simple as modifying the radiusd script file in /init.d
with the -x switch, but that causes errors. Does anyone have a working copy of
the init.d script I could look at?
Thank you in advance!
- Mike
-
List info/subscribe/unsubscribe? See http
.
Now we don't need the MS servers now!
Thanks a bunch You made me very happy!
Mike Cannady
**
HTC Disclaimer: The information contained in this message may be privileged
and confidential and protected from disclosure
+110
Cleaning up request 8 ID 52 with timestamp +110
Waking up in 1.0 seconds.
Cleaning up request 9 ID 53 with timestamp +110
Ready to process requests.
[r...@htcradius1 etc]#
Mike Cannady
Information Services
Horry Telephone Cooperative (HTC)
Phone: (843)369-8212
Fax..: (843)369-7195
Pager: (843
in serial.
One possibility, but there I didn't find anything at all, seems to be
using the perl module. Is it possible to run a perl script before
ntlm_auth will take place ?
Thanks for your answer.
Greetings from Switzerland.
Mike
-
List info/subscribe/unsubscribe? See http
is processing a request and where I can hook my
own logic into it.
Cheers Mike
-Ursprüngliche Nachricht-
Von: freeradius-users-bounces+mike.langen=ofwi...@lists.freeradius.org
[mailto:freeradius-users-bounces+mike.langen=ofwi...@lists.freeradius.org] Im
Auftrag von Phil Mayers
Gesendet
Hi Phil.
Thank you very much.
That would do for now!
Kind regards
Mike
-Ursprüngliche Nachricht-
Von: freeradius-users-bounces+mike.langen=ofwi...@lists.freeradius.org
[mailto:freeradius-users-bounces+mike.langen=ofwi...@lists.freeradius.org] Im
Auftrag von Phil Mayers
Gesendet
?
-Mike
On Wed, 15 Sep 2010, Alan Buxey wrote:
2.1.3 is very old now , 2.1.9 is current and has many fixes over that -
check its changelog .. this error message suggests that you've got a
slow backend somewhere - be that ldap, sql or even a bit of perl
- Reply message -
From: Mike
to unfinished request 35244
Sep 15 10:07:53 prad02 radiusd[10632]: Discarding duplicate request from
client FHSWLC-1 port 32768 - ID: 205 due to unfinished request 35245
-Mike
attachment: mike_diggins.vcf-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
1 - 100 of 436 matches
Mail list logo