Hi,
> what's wrong? Help!
>
> Tue Nov 29 17:14:00 2011 : Auth: Login incorrect: [host/dbu14/ Auth-Type = EAP>] (from client private-network port 123 cli
> 00-0E-A6-B4-43-99)
> Tue Nov 29 17:16:02 2011 : Error: --> verify error:num=10:certificate
> has expired
>
Victor Guk wrote:
> what's wrong? Help!
>
...
> Tue Nov 29 17:16:02 2011 : Error: TLS Alert write:fatal:certificate expired
What does that line say?
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
what's wrong? Help!
Tue Nov 29 17:14:00 2011 : Auth: Login incorrect: [host/dbu14/Auth-Type = EAP>] (from client private-network port 123 cli
00-0E-A6-B4-43-99)
Tue Nov 29 17:16:02 2011 : Error: --> verify error:num=10:certificate
has expired
Tue Nov 29 17:16:02 2011 : Error
suggestme wrote:
> I was successful to install Freeradius 2.1.10
Upgrade to 2.1.12.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
deployingradius.com site for basic testing. I can start the server in
debugging mode successfully using radiusd -X, which shows "Ready to process
requests". But while doing basic radtest for PAP authentication it gives
error:
radclient: Failed to send packet for ID 85: (unknown error)
rad
Hi,
> on server startup after reboot freeradius not start and show error
> Error: /etc/freeradius/proxy.conf[667]: Failed looking up hostname
> radius.easyzonecorp.net.
>
> but when i try to start by hand /etc/init.d/freeradius start, it 's OK.
>
> Why freeradius f
Dear all
I try to set freeradius proxy and put my server
my dns server and my isp dns is ok.
on server startup after reboot freeradius not start and show error
Error: /etc/freeradius/proxy.conf[667]: Failed looking up hostname
radius.easyzonecorp.net.
but when i try to start by hand /etc
Am 19.11.2011 19:37, schrieb Andreas Rudat:
> realy strange the machine where ubuntu AND xp is running both failes and
> windows is saying the zertificate is invalid/expired?? both are using
> the same one!
>
>
> Am 19.11.2011 19:17, schrieb Andreas Rudat:
>> Hi,
>>
realy strange the machine where ubuntu AND xp is running both failes and
windows is saying the zertificate is invalid/expired?? both are using
the same one!
Am 19.11.2011 19:17, schrieb Andreas Rudat:
> Hi,
> I get the error from time to time, I use one self signed cert for alle
> cl
Hi,
I get the error from time to time, I use one self signed cert for alle
clients and some times I get this error from one ubuntu client, do you
have any idea?
so self+signed cert + mschapv2
TLS Alert read:fatal:bad certificate
Sat Nov 19 18:52:30 2011 : Error: TLS_accept:failed in SSLv3
Harshavardhan Ch wrote:
> Hello,
> i am new to radius server,i made more changes in *user*s
> configuration file ("/usr/local/etc/raddb/:vi users") ,after configuring
> (radiusd -X) radius server was not configured ,output doesn't generate
> any *errors* or *warnings*, i attached the
Hello,
i am new to radius server,i made more changes in *user*s
configuration file ("/usr/local/etc/raddb/:vi users") ,after configuring
(radiusd -X) radius server was not configured ,output doesn't generate
any *errors* or *warnings*, i attached the output file .
please help me
o
Hi,
>I run� freeradius as root. e.g
>
>��� $sudo freeradius -X
>
>According to lsof, nothing is using port 1820. (netstat shows the same)
>
>��� $lsof -i :1820
..well, apart from the fact you are supposed to be looking for 18120 as er
the error message...
On 11/11/2011 10:51 PM, Paul Heil wrote:
Edit: Typo - Nothing is on port *18120*.
Maybe the server is haunted.
Seriously though, something else on the OS must be stopping the port
bind; either something is already bound (see below) or something is
denying permission.
Are you sure you don'
>
>
> $sudo freeradius -X
>
> According to lsof, nothing is using port 1820. (netstat shows the same)
>
> $lsof -i :1820
>
Well the port you should be checking is 18120 not 1820...
Arran Cudbard-Bell
a.cudba...@freeradius.org
Betelwiki, Betelwiki, Betelwiki http://wiki.freeradiu
On Sat, Nov 12, 2011 at 5:51 AM, Paul Heil wrote:
>> According to lsof, nothing is using port 1820. (netstat shows the same)
>>
>> $lsof -i :1820
(shrug)
Something in your setup is broken then. The default debian/ubuntu
package should work just fine.
You can either try to debug this further
On Fri, Nov 11, 2011 at 4:20 PM, Paul Heil wrote:
>
> I run freeradius as root. e.g
>
> $sudo freeradius -X
>
> According to lsof, nothing is using port 1820. (netstat shows the same)
>
> $lsof -i :1820
>
> Thanks,
> PaulH
>
>
Edit: Typo - Nothing is on port *18120*.
-
List info/subscrib
On Fri, Nov 11, 2011 at 3:51 PM, Fajar A. Nugraha wrote:
> (1) run it as root
> (2) make sure nothing else is running on that port (e.g. another
> freeradius instance)
> (3) if you don't know what (1) and (2) means, spend some time to learn
> some linux/unix basics. Especially the commands su/sud
On Sat, Nov 12, 2011 at 2:55 AM, Paul Heil wrote:
> Fri Nov 11 18:31:49 2011 : Error: /etc/freeradius/sites-enabled/
> inner-tunnel[32]: Error binding to port for 127.0.0.1 port 18120
>
> Can anybody suggest how to fix this issue?
(1) run it as root
(2) make sure nothing else i
I have a GuruPlug Server 003-GP0001 running Debian Linux 6.0.3 with
FreeRadius 2.1.10 installed.
I have followed the Basic Configuration
HOWTO<http://wiki.freeradius.org/Basic-configuration-HOWTO>,
but when I get to the point of starting the server for the first time, I
get this error:
Darren Shaw wrote:
> The FreeRadius server is a VM machine and the ESX host failed,
> everything came back and is now working apart from the following
This isn't a FreeRADIUS question. Your VM failed and destroyed the disk.
> The Radius Service, when the service starts this i
Hello,
The FreeRadius server is a VM machine and the ESX host failed, everything came
back and is now working apart from the following
The Radius Service, when the service starts this is the error we receive
/usr/local/etc/raddb/sites-enabled/default[219]: ERROR: Unknown value
Administrative
Hi,
>OS: Mac OSX 10.6.8
>FreeRADIUS version:�2.1.12
>Steps taken:
okay. so you downloaded the software, extracted it, then built it...
great. did you note what happened when you 'make install' ?
>Starting�-�reading�configuration�files�...�
>including�configuration�file�/usr
Stephen Kwok wrote:
> I am a newbie to FreeRADIUS and I have run into a problem during the
> setup. I have spent some time on researching for an answer online, but
> I got no luck. I have described the problem as below. Could anyone
> please let me know what went wrong? Thank you so much in adva
0*
--
rad_recv: Access-Request packet from host 127.0.0.1 port 64417,
id=253, length=77
User-Name = "testing"
User-Password = "password"
NAS-IP-Address = 172.16.142.1
NAS-Port = 0
Message-Authenticator = 0xac50d12cd
On 21/10/2011 22:31, Eric Geier wrote:
Thanks for the reply!
Yes, the clients are set with correct time/date.
That command didn't work. Did you mean openssl verify command? I
ran that and both the old cert (still valid for a few days) and
the new cert (already valid) shows correct domain but th
Thanks for the reply!
Yes, the clients are set with correct time/date.
That command didn't work. Did you mean openssl verify command? I
ran that and both the old cert (still valid for a few days) and
the new cert (already valid) shows correct domain but then says:
error 20 at 0
On 21/10/2011 20:44, Eric Geier wrote:
Hi, I’m trying to update my server’s cert, but getting errors
after applying it:
Fri Oct 21 12:26:45 2011 : Error: TLS Alert read:fatal:certificate
expired
Fri Oct 21 12:26:45 2011 : Error: TLS_accept:failed in SSLv3
read client certificate A
Fri Oct
Hi, Im trying to update my servers cert, but getting errors
after applying it:
Fri Oct 21 12:26:45 2011 : Error: TLS Alert read:fatal:certificate
expired
Fri Oct 21 12:26:45 2011 : Error: TLS_accept:failed in SSLv3
read client certificate A
Fri Oct 21 12:26:45 2011 : Error: rlm_eap: SSL
Hi andreapepa,
Thanks for your answer.
If I comment back this line I only see a white screen. This is very
very weird. I've installed thousands of web apps, and almost all php
based. There's no connection error anywhere.
I tried with the php CLI and I only see the same errors fr
yes i've passed the same "issue" after dialup admin installation.
but what you reporting is not an error it is only the debug info on top of
the pages that will remain there (and shows all the sql behind) until you
dont remove the sql debug in admin.conf:
# Uncomment to e
On Fri, Sep 9, 2011 at 9:50 AM, Det Det wrote:
> Hi,
> I have Activation attribute in radcheck table (which has a date VALUE) in
> old RADIUS server. I don't find this attribute in FreeRADIUS. I get this
> error. any idea?
What radius server is that?
If it's also a freera
Det Det wrote:
> I have Activation attribute in radcheck table (which has a date VALUE)
> in old RADIUS server. I don't find this attribute in FreeRADIUS. I get
> this error. any idea?
What is "Activation"?
It's not a standard RADIUS attribute. FreeRADIUS does
Hi,
I have Activation attribute in radcheck table (which has a date VALUE) in old
RADIUS server. I don't find this attribute in FreeRADIUS. I get this error. any
idea?
Failed to create the pair: Invalid octet string "Mar 09 2010 " for attribute
name "Activation"
Hi,
This is my first time using FreeRADIUS. It's running on Debian 6 and
yesterday I installed freeradius-dialupadmin package. Read HOWTO.gz
and README.Debian, and still not working. Home page looks fine but
when I go to Accounting or New User button it shows an error
DEBUG(SQL,MYSQL D
September 6, 2011 1:28 PM
Subject: Re: Expiration Module Not Returning the Error Message
On Tue, Sep 6, 2011 at 11:41 AM, Det Det wrote:
> Hi,
> The expiration module works but it is not returning the error message.
> Everytime I include the Expiration attribute and set date accordingly. The
On Tue, Sep 6, 2011 at 11:41 AM, Det Det wrote:
> Hi,
> The expiration module works but it is not returning the error message.
> Everytime I include the Expiration attribute and set date accordingly. The
> user is denied login. The reason is because the account expired and NOT
> b
Hi,
The expiration module works but it is not returning the error message.
Everytime I include the Expiration attribute and set date accordingly. The user
is denied login. The reason is because the account expired and NOT because
there is "no known good password found" as shown bel
Thanks, I ended up deleting all the recently created files in
/etc/raddb/certs and issuing the bootstrap command.
I did have to mkdir /var/run/radiusd after I saw an error about a file
radiusd was looking for there, but it works fine afterwards.
On Thu, Sep 1, 2011 at 11:53 PM, Alan DeKok wrote
Dom writes:
> That is why I am so confused. I do have this user in the users file
> and even tested authentication using NTradping and it works fine going
> directly from the Internet to the radius server. However when I try
> to authenticate via the LNS I see this error.
>
>
That is why I am so confused. I do have this user in the users file and
even tested authentication using NTradping and it works fine going
directly from the Internet to the radius server. However when I try to
authenticate via the LNS I see this error.
any idea's.
Message: 4
Date
Hi,
>I encountered this error when starting radiusd –X trying to make it work
>with peap. Can you help me fix this or give me an idea how to?
>
>
>
>Ignoring EAP-Type/tls because we do not have OpenSSL support.
>
>Ignoring EAP-Type/ttls becaus
Dom writes:
> [pap] WARNING! No "known good" password found for the user.
Looks good so far, but you need to tell freeradius the password for this
user...
E.g. by adding something like this to the "users" file:
aew...@domain.com Cleartext-Password := "password"
or configure some database bac
Hi guys,
I encountered this error when starting radiusd -X trying to make it work with
peap. Can you help me fix this or give me an idea how to?
Ignoring EAP-Type/tls because we do not have OpenSSL support.
Ignoring EAP-Type/ttls because we do not have OpenSSL support.
Ignoring EAP-Type/peap
Chad Rebuck wrote:
> Can someone point me in the right direction on figuring this out? I'm
> running Arch linux and I installed via "pacman -S freeradius". I
> didn't edit any config files yet.
It's supposed to build the various cert files the first time it's
booted. If that isn't happening p
private_key_password = "whatever"
dh_file = "/etc/raddb/certs/dh"
random_file = "/etc/raddb/certs/random"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
make_cert_co
I am trying to terminate vpdn sessions through our cisco 3825 using
freeradius. I am new to this whole process and I was hoping to get some
assistance with the missing configuration.
Below is the error message I am receiving when trying to authenticate
via the router.
rad_recv: Access
Thanks so much! I understand it now. And thanks for the suggestions and
additional inputs.
BRegards,
Det
Sent from my iPad
On Aug 29, 2011, at 10:56 PM, Rich Graves wrote:
>> When I shutdown one of the DB, it generates an error. How do I tell
>> freeradius to ignore that and p
an DeKok wrote:
> Det Det wrote:
>> Really?
>
>If you think I'm lying, why ask questions?
>
>> What is the failover feature for?
>
> Read the docs. It's explained.
>
>> I can specify multiple DBs but
>> if FreeRADIUS cannot connect to a
> When I shutdown one of the DB, it generates an error. How do I tell
> freeradius to ignore that and proceed if it can connect to at least one
> of the DB? /etc/freeradius/sql2.conf[22]: Instantiation failed for
> module "sql2"
Both databases must be up at the time of
Det Det wrote:
> Really?
If you think I'm lying, why ask questions?
> What is the failover feature for?
Read the docs. It's explained.
> I can specify multiple DBs but
> if FreeRADIUS cannot connect to at least one of the DBs it will have an
> error and will no
Really? What is the failover feature for? I can specify multiple DBs but if
FreeRADIUS cannot connect to at least one of the DBs it will have an error and
will not be able to start. There is no way to get around this? That is use
first DB if first DB is up. If second DB is down and first DB is
Det Det wrote:
> When I shutdown one of the DB, it generates an error. How do I tell
> freeradius to ignore that and proceed if it can connect to at least one
> of the DB?
You don't.
The only way to change this is via source code patches.
Alan DeKok.
-
List info/subscribe/un
When I shutdown one of the DB, it generates an error. How do I tell freeradius
to ignore that and proceed if it can connect to at least one of the DB?
/etc/freeradius/sql2.conf[22]: Instantiation failed for module "sql2"
/etc/freeradius/radiusd.conf[75]: Failed to find module &q
Hi there,
I can't get FreeRADIUS to ignore error and continue processing when 1 DB is
down even when it can connect to the other DB. Below is my config.
# radiusd.conf
instantiate {
...
redundant redundant_sql {
sql1
sql2
ha
say thanks to all of you again and give
an update if i ever succeed in the dynamic-client. I am sure its just some
silly mistakes that i overlooked.
Alex
--
View this message in context:
http://freeradius.1045715.n5.nabble.com/radmin-del-client-error-tp4725176p4745003.html
Sent from the FreeR
ocumented.
>
> The Mac OSX Server terminal output to radiusd -s -X ends with
>
> Failed binding to socket: Address already in use
> /private/etc/raddb/radiusd.conf[242]: Error binding to port for 0.0.0.0 port
> 1812
>
> Is this the problem and if so how might i fix it?
tohaikmeng wrote:
> My aim is to achieve the addition of client entries without any server
> reloading/restart, and AAA will permits for those newly added clients. My
> first thought was to use radmin -e "add client file " and it works for
> me but the deletion "del client ipaddr " failed on me.
-X ends with
Failed binding to socket: Address already in use
/private/etc/raddb/radiusd.conf[242]: Error binding to port for 0.0.0.0 port
1812
Is this the problem and if so how might i fix it?
Any help is greatly appreciated
David
server10:~ root# radiusd -s -X
FreeRADIUS Version 2.1.3,
n5.nabble.com/radmin-del-client-error-tp4725176p4744741.html
Sent from the FreeRadius - User mailing list archive at Nabble.com.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
.1045715.n5.nabble.com/radmin-del-client-error-tp4725176p4738057.html
Sent from the FreeRadius - User mailing list archive at Nabble.com.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
On 26 Aug 2011, at 12:38, Alan Buxey wrote:
> Hi,
>
>> I think he's saying he created a directory to put all the dynamic clients
>> files, and that he's symlinked the virtual server correctly.
>
> at which point I would ask, WHY bother with the dynamic-client
> VS at all?? if all that is happe
Hi,
> I think he's saying he created a directory to put all the dynamic clients
> files, and that he's symlinked the virtual server correctly.
at which point I would ask, WHY bother with the dynamic-client
VS at all?? if all that is happening is that standard client {}
entries are going into it,
= 0.0.0.0
netmask = 0
dynamic_clients = dynamic_client_server
directory = ${confdir}/dynamic-clients/
lifetime = 3600
}
Alex
--
View this message in context:
http://freeradius.1045715.n5.nabble.com/radmin-del-client-error-tp4725176p4737651.html
Sent from the FreeRad
On 26 Aug 2011, at 12:10, Alan Buxey wrote:
> Hi,
>
>> [root@server sites-enabled]# pwd
>> /usr/local/etc/raddb/sites-enabled
>> [root@server sites-enabled]# ls -al
>> total 0
>> lrwxrwxrwx 1 root root 33 2011-08-22 15:58 control-socket ->
>> ../sites-available/control-socket
>> lrwxrwxrwx 1 roo
Hi,
> [root@server sites-enabled]# pwd
> /usr/local/etc/raddb/sites-enabled
> [root@server sites-enabled]# ls -al
> total 0
> lrwxrwxrwx 1 root root 33 2011-08-22 15:58 control-socket ->
> ../sites-available/control-socket
> lrwxrwxrwx 1 root root 26 2011-08-22 15:58 default ->
> ../sites-availabl
5715.n5.nabble.com/radmin-del-client-error-tp4725176p4737604.html
Sent from the FreeRadius - User mailing list archive at Nabble.com.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
> I sent a packet to the server yet i still received the following error.
> Error: Ignoring request to authentication address * port 1812 from unknown
> client 192.168.169.74 port 56181
>
> Is there any mistakes i did in the above?
>
> In case, you are curious.. my file 192.1
received the following error.
Error: Ignoring request to authentication address * port 1812 from unknown
client 192.168.169.74 port 56181
Is there any mistakes i did in the above?
In case, you are curious.. my file 192.168.169.74 contains the following.
client 192.168.169.74 {
ipaddr
Hi,
> 1) secret is required in the client definition (file: 192.168.169.74)? How
> do i make sure the server validate the client secret upon receiving the
> radius packet? Is the logic lies with dynamic_client_server? I noticed
> FreeRADIUS-Client-Secret was dynamically hard-coded in the example
client 192.168.169.74 {
secret = secret123
}
--
View this message in context:
http://freeradius.1045715.n5.nabble.com/radmin-del-client-error-tp4725176p4733324.html
Sent from the FreeRadius - User mailing list archive at Nabble.com.
-
List info/subscribe
tohaikmeng wrote:
> I read site-available/dynamic-clients. But I can't find the link that
> trigger radius daemon to add the dynamic client definition file. I named the
> client ip as file name instructed and placed in the appointed client
> definition directory. Is there any steps that I missed ou
> Alex
>
> --
> View this message in context:
> http://freeradius.1045715.n5.nabble.com/radmin-del-client-error-tp4725176p4730201.html
> Sent from the FreeRadius - User mailing list archive at Nabble.com.
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/lis
d placed in the appointed client
definition directory. Is there any steps that I missed out?
Alex
--
View this message in context:
http://freeradius.1045715.n5.nabble.com/radmin-del-client-error-tp4725176p4730201.html
Sent from the FreeRadius - User mailing list archive at Nabble.com.
-
List
Hello Bjorn & Arran,
Sorry, I don't quite following u guys were saying. :( is there any
differences in the source that I downloaded?
Alex
--
View this message in context:
http://freeradius.1045715.n5.nabble.com/radmin-del-client-error-tp4725176p4730190.html
Sent from the FreeRadi
admin -e "del client ipaddr 192.168.169.74"
> ERROR: Must specify
>
> [root@FC-O ~]# radmin
> radmin 3.0.0 - FreeRADIUS Server administration tool.
> Copyright (C) 2008 The FreeRADIUS server project and contributors.
> There is NO warranty; not even for MERCHANTABILITY
On 24 Aug 2011, at 12:50, Bjørn Mork wrote:
> tohaikmeng writes:
>
>> [root@FC-O ~]# radmin -e "del client ipaddr"
>> ERROR: Must specify
>> [root@FC-O ~]# radmin -e "del client ipaddr 192.168.169.74"
>> ERROR: Client 192.168.169.74 was not d
Hello Arran,
Yes. I did. Is there anything i did wrongly?
[root@FC-O ~]# radmin -e "del client ipaddr 192.168.169.74"
ERROR: Must specify
[root@FC-O ~]# radmin
radmin 3.0.0 - FreeRADIUS Server administration tool.
Copyright (C) 2008 The FreeRADIUS server project and contributors.
T
tohaikmeng writes:
> [root@FC-O ~]# radmin -e "del client ipaddr"
> ERROR: Must specify
> [root@FC-O ~]# radmin -e "del client ipaddr 192.168.169.74"
> ERROR: Client 192.168.169.74 was not dynamically defined.
Yes, that looks true even with yesterday's pa
Arran Cudbard-Bell writes:
> Hi Alex,
>
> I just built from master myself
>
> And it seems to be working fine for me...
>
> radmin> del client ipaddr 192.168.1.1
> ERROR: No such client
> radmin> del client
> del client ipaddr - Delete a dynamically create
> For more information about these matters, see the file named COPYRIGHT.
> [root@FC-O ~]# radmin -e "show client list"
>127.0.0.1
> [root@FC-O ~]# radmin -e "add client file /usr/local/etc/raddb/alex.conf"
> [root@FC-O ~]# radmin -e "show client list&q
168.169.74
[root@FC-O ~]# radmin -e "del client ipaddr"
ERROR: Must specify
[root@FC-O ~]# radmin -e "del client ipaddr 192.168.169.74"
ERROR: Client 192.168.169.74 was not dynamically defined.
[root@FC-O ~]#
Regards,
Alex
--
View this message in context:
http://f
Hi Alex,
I just built from master myself
And it seems to be working fine for me...
radmin> del client ipaddr 192.168.1.1
ERROR: No such client
radmin> del client
del client ipaddr - Delete a dynamically created client
radmin> del client ipaddr 192.168.1.1.1.1
ERROR: Failed parsing I
Hello Arran,
I have built the master copy from git and tested. The result still the same.
Not fixed. :)
Alex
--
View this message in context:
http://freeradius.1045715.n5.nabble.com/radmin-del-client-error-tp4725176p4729575.html
Sent from the FreeRadius - User mailing list archive at
Arran Cudbard-Bell writes:
> On 23 Aug 2011, at 09:52, tohaikmeng wrote:
>>
>> What do you mean by parameter parsing?
>
> This:
>
> radmin> del client ipaddr 192.168.168.111
> ERROR: Must specify
> radmin> del client ipaddr 192.168.168.111
>
> Obvi
Wow, awesome. You guys are really great. I am going to try that now! Keep you
guys informed. thanks again!
:-)
Alex
--
View this message in context:
http://freeradius.1045715.n5.nabble.com/radmin-del-client-error-tp4725176p4726165.html
Sent from the FreeRadius - User mailing list archive at
of client
>> without restart of radius daemon seems the best solution.
>>
>>
>>
>> Alex
>>
>>
>>
>> --
>> View this message in context:
>> http://freeradius.1045715.n5.nabble.com/radmin-del-client-error-tp4725176p4725972.html
>
; without restart of radius daemon seems the best solution.
>
>
>
> Alex
>
>
>
> --
> View this message in context:
> http://freeradius.1045715.n5.nabble.com/radmin-del-client-error-tp4725176p4725972.html
> Sent from the FreeRadius - User mailing list archive at
On Tue, Aug 23, 2011 at 3:32 PM, tohaikmeng wrote:
> My design aims to achieve zero downtime, therefore deletion of client
> without restart of radius daemon seems the best solution.
"zero downtime" sounds nice, but most of the time the cost would be too high.
>
> Do you mean dynamically generat
-available/ ? thanks for this link. I will test if it works. :)
Alex
--
View this message in context:
http://freeradius.1045715.n5.nabble.com/radmin-del-client-error-tp4725176p4725972.html
Sent from the FreeRadius - User mailing list archive at Nabble.com.
-
List info/subscribe/unsubscribe? See
On 23 Aug 2011, at 09:52, tohaikmeng wrote:
> Hello Arran,
>
> What do you mean by parameter parsing?
This:
radmin> del client ipaddr 192.168.168.111
ERROR: Must specify
radmin> del client ipaddr 192.168.168.111
Obviously the first form you used is correct, the fact that it
Hello Arran,
What do you mean by parameter parsing?
I would like to achieve deletion of client without restarting of the radius
daemon, which is part of the design.
Alex
--
View this message in context:
http://freeradius.1045715.n5.nabble.com/radmin-del-client-error-tp4725176p4725861.html
ent.
>
> Is there a quick workaround for this? I really need yours and Allan help on
> this.
>
> Alex
>
> --
> View this message in context:
> http://freeradius.1045715.n5.nabble.com/radmin-del-client-error-tp4725176p4725813.html
> Sent from the FreeRadius - User m
Thanks Arran for your quick response and acknowledgement.
Is there a quick workaround for this? I really need yours and Allan help on
this.
Alex
--
View this message in context:
http://freeradius.1045715.n5.nabble.com/radmin-del-client-error-tp4725176p4725813.html
Sent from the FreeRadius
ically via "add
> client file alex.conf".
>
> alex.conf contains the following content.
> client 192.168.168.111 {
> secret = secret
> }
>
> however, i experience the following error. Can you show me the correct del
> command for this?
>
>
Hello,
I tried using radmin to delete a client that was added dynamically via "add
client file alex.conf".
alex.conf contains the following content.
client 192.168.168.111 {
secret = secret
}
however, i experience the following error. Can you show me the correct del
comman
Hi,
I had generated certificates for EAP-TLS authentication. It worked fine in a
linux setup but windows wouldn't play ball.
Somebody pointed out that the CA.* scripts in the ssl directory can generate
windows compatible certs. I did that but when I try to use that I get the
following
Hi,
I seem to have the same issue as described in this thread, I also have
XP/Novell legacy clients, and I want to move to AD from eDir.
Re: Error: User-Name is not the same as MS-CHAP
name<https://lists.freeradius.org/pipermail/freeradius-users/2011-June/msg00070.html>
The last mention
On 07/20/2011 09:22 AM, DENJEAN Didier wrote:
Hi,
I have some problems with Freeradius and EAP
I use freeradius version 2.1.11 on debian 5
When I start the radius server in debug mode (radiusd -xX), there are no error
(file debug1.txt)
When eduroam server enable connexion on your freeradius
Hi,
I have some problems with Freeradius and EAP
I use freeradius version 2.1.11 on debian 5
When I start the radius server in debug mode (radiusd -xX), there are no error
(file debug1.txt)
When eduroam server enable connexion on your freeradius server, I have some
errors (file debug2.txt
401 - 500 of 2904 matches
Mail list logo
