Ok!! I'm sorry, it was not a good idea introducing wireshark print screens.
Yeah its better to put here a log of my freeradius , which it is the issue
we talk about. I didn't though with that. Here is my log of freeradius. As
see, only some Aruba-VSA is sent not in the Access-Accept, but inside
aangles wrote:
Ok!! I'm sorry, it was not a good idea introducing wireshark print screens.
Yeah its better to put here a log of my freeradius , which it is the issue
we talk about. I didn't though with that. Here is my log of freeradius. As
see, only some Aruba-VSA is sent not in the
Ok. I set that parameter you comment: use_tunneled_reply = yes and it does
not sent the VSA in the access-accept which I think that if radius could
sent this VSA atributed inside an access-accept paquet then the NAS would
understand it.
That would work, if only you enabled it in the
thank you very much Kalik.
Now it works!! :)
Ivan Kalik wrote:
Ok. I set that parameter you comment: use_tunneled_reply = yes and it
does
not sent the VSA in the access-accept which I think that if radius could
sent this VSA atributed inside an access-accept paquet then the NAS would
aangles wrote:
once I do radiusd -X, I see only the first access-challenge with the
Aruba-User-Vlan Attirbute, and no more access-challenges have this
attribute.
In fact, Access-Challenges are not supposed to have VSAs.
So, it is not working , May be i am close to the solution but I don't
have freeradius 2.1, and the configuration of my users file is like the
following:
...
DEFAULT Auth-Type = LDAP
Aruba-User-Vlan = 20,
Fall-Through : = 1
once I do radiusd -X, I see only the first access-challenge with the
Aruba-User-Vlan Attirbute, and no more access-challenges have this
have freeradius 2.1, and the configuration of my users file is like the
following:
...
DEFAULT Auth-Type = LDAP
Aruba-User-Vlan = 20,
Fall-Through : = 1
once I do radiusd -X, I see only the first access-challenge with the
Aruba-User-Vlan Attirbute, and no more access-challenges
Ivan Kalik wrote:
have freeradius 2.1, and the configuration of my users file is like the
following:
...
DEFAULT Auth-Type = LDAP
Aruba-User-Vlan = 20,
Fall-Through : = 1
once I do radiusd -X, I see only the first access-challenge with the
Aruba-User-Vlan Attirbute, and no
have freeradius 2.1, and the configuration of my users file is like the
following:
...
DEFAULT Auth-Type = LDAP
Aruba-User-Vlan = 20,
Fall-Through : = 1
once I do radiusd -X, I see only the first access-challenge with the
Aruba-User-Vlan Attirbute, and no more access-challenges
9 matches
Mail list logo
