I was able to get this working, thanks for all your help everyone
On Mon, May 14, 2012 at 4:51 PM, alan buxey wrote:
> Hi,
>
>> Well I've been trying to follow the advice here and also what I've
>> found online and in the configs. I attempted to revert to the
>> 'default' config files for sites-e
Hi,
> Well I've been trying to follow the advice here and also what I've
> found online and in the configs. I attempted to revert to the
> 'default' config files for sites-enabled, as this project was dropped
> in my lap after months of another guy working on it and being
> frustrated, and I wasn'
Well I've been trying to follow the advice here and also what I've
found online and in the configs. I attempted to revert to the
'default' config files for sites-enabled, as this project was dropped
in my lap after months of another guy working on it and being
frustrated, and I wasn't sure what kin
On 14/05/12 15:58, Steve Hopps wrote:
I'll post the full log. It should be pulling from OpenLDAP. I had to
It's not. You haven't configured it to do that.
Module: Instantiating module "ldap" from file /etc/freeradius/radiusd.conf
ldap {
server = "localhost"
port = 389
O
Hi,
> We are using the correct password. There must be something broken
> causing the passwords not to match. That is what I'm looking for help
> to determine.
WHERE are you using the correct password? if the client is being given the
correct
password, then where are the usernames and paswords
Steve Hopps wrote:
> I'll post the full log. It should be pulling from OpenLDAP. I had to
> censor the log in a few places, including the IP of the system I'm
> using to test, which I changed to 6.6.6.6
And please check Phil's comment. It is *still* showing this:
[pap] Using CRYPT password "*"
I'll post the full log. It should be pulling from OpenLDAP. I had to
censor the log in a few places, including the IP of the system I'm
using to test, which I changed to 6.6.6.6
Thanks for helping me with this.
FreeRADIUS Version 2.1.10, for host x86_64-pc-linux-gnu, built on Nov
14 2010 at 21:12
Steve Hopps wrote:
> We are using the correct password.
You can believe what the server sees. Or you can believe a fantasy.
It's that simple.
> There must be something broken
> causing the passwords not to match. That is what I'm looking for help
> to determine.
As Phil said, post the FU
On 14/05/12 15:07, Steve Hopps wrote:
We are using the correct password. There must be something broken
causing the passwords not to match. That is what I'm looking for help
to determine.
Send a full debug "radiusd -X". The trimmed debug doesn't show enough info.
However, at a guess, this line
We are using the correct password. There must be something broken
causing the passwords not to match. That is what I'm looking for help
to determine.
On Fri, May 11, 2012 at 3:02 PM, Alan DeKok wrote:
> Steve Hopps wrote:
>> I'm trying to use FreeRadius with OpenLDAP for authentication of some
>>
Steve Hopps wrote:
> I'm trying to use FreeRadius with OpenLDAP for authentication of some
> Nanostation M2 access points, but have had no luck getting it to work.
> When using rad_eap_test to experiment, I logged the following:
...
> [pap] Passwords don't match
> ++[pap] returns reject
> Failed to
I'm trying to use FreeRadius with OpenLDAP for authentication of some
Nanostation M2 access points, but have had no luck getting it to work.
When using rad_eap_test to experiment, I logged the following:
Found Auth-Type = PAP
# Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
+
On 24/04/12 15:48, Ali Majdzadeh wrote:
Yes I did. I also read rlm_mschap sources and dependent libraries.
May lead me which section explain this function?
I'm sorry, I don't understand you.
This discussion has become off-topic for this list. I'm afraid you are
going to have to work this out
Ali Majdzadeh wrote:
> Yes I did. I also read rlm_mschap sources and dependent libraries.
>
> May lead me which section explain this function?
We did.
The RFC's are clear. The source code in rlm_mschap is clear.
This list is about FreeRADIUS. It is *not* the place to learn how
MS-CHAP w
متأسفانه فرستادم...
2012/4/24 Ali Majdzadeh
> Yes I did. I also read rlm_mschap sources and dependent libraries.
>
>
> May lead me which section explain this function?
>
>
> 2012/4/24 Phil Mayers
>
>> On 24/04/12 13:44, Ali Majdzadeh wrote:
>>
>>> Hi
>>>
>>> I checked that rlm_mschap converts t
Yes I did. I also read rlm_mschap sources and dependent libraries.
May lead me which section explain this function?
2012/4/24 Phil Mayers
> On 24/04/12 13:44, Ali Majdzadeh wrote:
>
>> Hi
>>
>> I checked that rlm_mschap converts the CHAP_CHALLENGE from radius packet
>> into other format that
On 24/04/12 13:44, Ali Majdzadeh wrote:
Hi
I checked that rlm_mschap converts the CHAP_CHALLENGE from radius packet
into other format that used in ntlm_auth.
Radius Packet: MS-CHAP-Challenge = 0x7e95c31b02cd054fd1dcacea7c2fb358
Radius –X output for Ntlm_auth: expand:
--challenge=%{%{mschap:Cha
Hi
I checked that rlm_mschap converts the CHAP_CHALLENGE from radius packet
into other format that used in ntlm_auth.
Radius Packet: MS-CHAP-Challenge = 0x7e95c31b02cd054fd1dcacea7c2fb358
Radius –X output for Ntlm_auth: expand:
--challenge=%{%{mschap:Challenge}:-00} -> --challenge=4487f1f
Am 16.04.2012 22:40, schrieb Matthew Newton:
> On Mon, Apr 16, 2012 at 10:00:03PM +0200, Gerald Krause wrote:
>>> Please use 2.1.12. It's better.
>>
>> I'll check that suggestion. In the moment this is a plain "apt-get
>> install/update/upgrade" Debian box that comes with 2.1.10 (don't blame
>>
On Mon, Apr 16, 2012 at 10:00:03PM +0200, Gerald Krause wrote:
> > Please use 2.1.12. It's better.
>
> I'll check that suggestion. In the moment this is a plain "apt-get
> install/update/upgrade" Debian box that comes with 2.1.10 (don't blame
> me...) but maybe I'am going to install freeradius
Am 16.04.2012 21:22, schrieb Alan DeKok:
> Gerald Krause wrote:
>> after upgrading our server from 2.0.4 to 2.1.10
>
> Please use 2.1.12. It's better.
I'll check that suggestion. In the moment this is a plain "apt-get
install/update/upgrade" Debian box that comes with 2.1.10 (don't blame
me...
Gerald Krause wrote:
> after upgrading our server from 2.0.4 to 2.1.10
Please use 2.1.12. It's better.
> we see a change in the
> auth logic - e.g. when processing proxied requests to a home server and
> their replies. We need this feature to append some special attributes to
> the accept-pack
Hi,
after upgrading our server from 2.0.4 to 2.1.10 we see a change in the
auth logic - e.g. when processing proxied requests to a home server and
their replies. We need this feature to append some special attributes to
the accept-packet from the home server before sending it to the NAS.
1) Our
On 04/15/2012 09:51 PM, Ali Majdzadeh wrote:
Hi
Tnx for Ur fast reply.
As I explained, I know that the format is differ from the original
attributes. I want to know that:
If I want to run it from commandline, how can I convert the challenge and
response attributes to which they can be used in
Ali Majdzadeh wrote:
> As I explained, I know that the format is differ from the original
> attributes. I want to know that:
>
> If I want to run it from commandline, how can I convert the challenge and
> response attributes to which they can be used in command line?
You read the MS-CHAP RFCs,
Hi
Tnx for Ur fast reply.
As I explained, I know that the format is differ from the original
attributes. I want to know that:
If I want to run it from commandline, how can I convert the challenge and
response attributes to which they can be used in command line?
In other word, I want to use ntl
>
>
>with radius –X , I saw that the challenge and response is differ from
>that
>I got in auth_log in same session. So if I run ntlm_auth with new
>values,
>it’s OK! what’s wrong?
Freeradius processes the mschapv2 challenge into a different format required by
samba. There's nothing "wrong". Thi
Hi
I’m using FreeRadius 2.1.12 wih mschap and ntlm_auth external execution
module as follows:
ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key
--username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}}
--challenge=%{%{mschap:Challenge}:-00}
--nt-response=%{%{mschap:NT-Response}:-00}"
[mailto:freeradius-users-bounces+fam=solacetel@lists.freeradius.org] On
Behalf Of Alan DeKok
Sent: Friday, February 03, 2012 9:17 PM
To: FreeRadius users mailing list
Subject: Re: Auth Problem
Fazal Ahmed Malik wrote:
> I have been using Freeradius for couple of years. Freeradius is
> instal
Fazal Ahmed Malik wrote:
> I have been using Freeradius for couple of years. Freeradius is
> installed on FreeBSD with mpd. All is working fine with Mac based
> Calling-station. I have problem with one username. With that particular
> user nothing works I mean he can bypass password, expiration and
Dear List,
I have been using Freeradius for couple of years. Freeradius is installed on
FreeBSD with mpd. All is working fine with Mac based Calling-station. I have
problem with one username. With that particular user nothing works I mean he
can bypass password, expiration and calling-station.
Nelson Vale wrote:
> The user's DN is OK now (no extra characters), but the ldap
> authentication still doesn't work. I think the problem is that double
> quotes must be escaped before sent to AD.
OK.
> In my fix in rlm_ldap (test purpose only), I did just that before
> assigning the vp_user_dn
2010/6/9 Alan DeKok
> Nelson Vale wrote:
> > Sorry, the problem occurs only with the " (double quotes) character and
> > not to the other two characters.
>
> Try re-building from git.freeradius.org, branch v2.1.x. There's a fix
> which should help.
>
> The user's DN is OK now (no extra charact
Nelson Vale wrote:
> Sorry, the problem occurs only with the " (double quotes) character and
> not to the other two characters.
Try re-building from git.freeradius.org, branch v2.1.x. There's a fix
which should help.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.or
Sorry, the problem occurs only with the " (double quotes) character and not
to the other two characters.
2010/6/7 Nelson Vale
> Hi all,
>
>
> I've recently found a problem authenticating some users in AD (2003) when
> the user's Distinguish Names have one or more of the following characters:
>
Hi all,
I've recently found a problem authenticating some users in AD (2003) when
the user's Distinguish Names have one or more of the following characters:
" ' ` (double quotes, apostrophe or grave accent), using freeradius 2.0.2
and 2.1.9 versions:
"...
[ldap] login attempt by "johndoe" with
i had the same problem when i wanted to authenticate the hotspot`s user with
freeradius.
the solution was to make a static mapping on IP - HOTSPOT - IP BINDINGS
MAC address : THE MAC OF THE SERVER
ADDRESS : THE IP ADDRESS OF THE SERVER
TO ADDRESS : THE SAME AS ABOVE
SERVER : ALL
TYP
2009/3/19 Lazar Cherveniakov :
> Everything looks fine in IP addresses, but the problem is still the same.
Looks like you got exactly the problem I described. See here :
> Mikrotik debug log
> 01:33:40 radius,debug sending 53:02 to 192.168.200.2:1812
Mikrotik thinks radius IP is 192.168.200.2
>
>The machines are connected to cable and on 2 meters,
>in this case where to find the problem?
>What and how to get to see where the real problem?
Wireshark. If you see packets on the wire - Mikrotik is stopping it. If
you don't see them on the wire - radius machine is stopping them.
Ivan Kalik
K
The machines are connected to cable and on 2 meters,
in this case where to find the problem?
What and how to get to see where the real problem?
--
Lazar Cherveniakov
Micro computers system - Lazkom
LIVE FREE OR DIE
-
Powered by Mail.BG - http://mail.bg
-
List
>Everything looks fine in IP addresses, but the problem is still the same.
No, it's not looking fine.
>Mikrotik debug log
. has no trace of Access-Accept packet - it didn't arrive.
>Here again the log of Mikrotik and freeradius:
>
Stop looking at the logs and start looking at the network.
Iva
Everything looks fine in IP addresses, but the problem is still the same.
Here again the log of Mikrotik and freeradius:
Mikrotik debug log
01:33:40 pppoe,info PPPoE connection established from 00:15:AF:1F:23:1A
01:33:40 pppoe,ppp,info : waiting for call...
01:33:40 radius,debug new request 53:0
>I don`t have firewall
>How i solve the problem ?
Yes, you do. Things like iptables are also firewalls. Use wireshark to
find where are packets stopped. And then fix it.
Ivan Kalik
Kalik Informatika ISP
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
ping NAS from radius server
ping radius server from nas
Also, check mtik logs... you can turn on radius debugging in mtik and you
will see what is the problem...
On Thu, Mar 19, 2009 at 9:42 AM, Fajar A. Nugraha wrote:
> 2009/3/19 Lazar Cherveniakov :
> > I don`t have firewall
> > How i solve t
2009/3/19 Lazar Cherveniakov :
> I don`t have firewall
> How i solve the problem ?
Does your radius server have more than one IP address?
If yes, then probably you tell mikrotik that radius IP is the
secondary address while freeradius sends replies from primary IP
address. There are some ways to f
I don`t have firewall
How i solve the problem ?
Tanks advanced
--
Lazar Cherveniakov
Micro computers system - Lazkom
LIVE FREE OR DIE
-
Powered by Mail.BG - http://mail.bg
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>Sending Access-Accept of id 2 to 192.168.200.4 port 32768
..
>rad_recv: Access-Request packet from host 192.168.200.4:32768, id=2,
>length=144
>Sending duplicate reply to client TEST-RADIUS:32768 - ID: 2
>Re-sending Access-Accept of id 2 to 192.168.200.4 port 32768
..
>rad_recv: Acces
Sorry i`m new mail-list user
While tracking installed following instructions
http://abills.net.ua/wiki/doku.php?id=abills:docs_03:install:en[1]
the all debug log is
# radiusd -X
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /etc/raddb/p
>I`m new radius user and i`m beginner.
>I have problem with connect mikrotik with radius server.
>My clients using pppoe server but i have connect to radius server but
>after configuration from internet documentation my server don`t work
>and i receive errors in radius.log and pppoe server show
Hello,
I`m new radius user and i`m beginner.
I have problem with connect mikrotik with radius server.
My clients using pppoe server but i have connect to radius server but
after configuration from internet documentation my server don`t work
and i receive errors in radius.log and pppoe server
>I have quite a interesting problem. And I don't think it's
>freeRADIUS-related
You are correct. It's an AD problem. Something is wrong with the schema
for those imported accounts. SAM-Account-Name should be of the type
ADSTYPE_OCTET_STRING (case insensitive unicode string).
Ivan Kalik
Kalik Info
Hi List,
I have quite a interesting problem. And I don't think it's
freeRADIUS-related, but I hope somebody else already had the same issue and
can give me a hint. Also a hint where to dig / ask would be very nice...
Okay, the setup:
I'm using freeRADIUS aus 802.1x/PEAP authenticator for our WLA
Hi,
First sorry for my english...
So we have a freeradius server and we have a problem of authentification.
Sometimes we received in the log this kind of password if the user try to
relog 2 or 3 times the log was successful but sometimes it don't work at
all.
For exemple :
Auth: Login incorrec
[EMAIL PROTECTED] wrote:
> we use nagios to monitor our freeradius install. this is using
> the adv_radius_check plugin to check from the nagios servers a
> user on the freeradius server (in the users file), the following
> are the succinct details
...
> okay. so the user authentication tests fine
hi,
we use nagios to monitor our freeradius install. this is using
the adv_radius_check plugin to check from the nagios servers a
user on the freeradius server (in the users file), the following
are the succinct details
users file entry
nagios-user Huntgroup-Name == "nagios", Cleartext-Password
Emerson,
change log_auth to yes in radiusd.conf
Best regards, Leandro
Brasil! =D
Emerson escreveu:
Hi,
i have a freeradius 1.1.1 running in slack-10.1
My radius client is a Access Point wl-5460AP, auth with WPA working
with Enterprise (Radius), in ports 1812/1813 with correct secret, but
Hi,
i have a freeradius 1.1.1 running in slack-10.1
My radius client is a Access Point wl-5460AP, auth with WPA working
with Enterprise (Radius), in ports 1812/1813 with correct secret, but
when i try to authenticate in this AP, i configure my PC with this
configuration and it auth. But in m
"ByoungJu Jeon" <[EMAIL PROTECTED]> wrote:
When authorization, RADIUS set Auth-Type as CHAP. (In the log, you can see
"rlm_chap: Setting 'Auth-Type := CHAP'".) But when authentication, RADIUS
set Auth-Type as Reject. (In the log, you can see "rad_check_password:
Found Auth-Type Reject".) I don
Hi,
I am now in using FreeRADIUS 1.0.5 with ATA 188 v3.1.2 and GunGK 2.2.2_4 on
FreeBSD 6.0.
When GnuGK send Access Request for ATA, RADIUS reject it.
You can check the log from FreeRADIUS as below.
When authorization, RADIUS set Auth-Type as CHAP. (In the log, you can see
"rlm_chap: Settin
"ByoungJu Jeon" <[EMAIL PROTECTED]> wrote:
> When authorization, RADIUS set Auth-Type as CHAP. (In the log, you can see
> "rlm_chap: Setting 'Auth-Type := CHAP'".) But when authentication, RADIUS
> set Auth-Type as Reject. (In the log, you can see "rad_check_password:
> Found Auth-Type Reject".
Hi,
I am now in using FreeRADIUS 1.0.5 with ATA 188 v3.1.2 and GunGK 2.2.2_4 on
FreeBSD 6.0.
When GnuGK send Access Request for ATA, RADIUS reject it.
You can check the log from FreeRADIUS as below.
When authorization, RADIUS set Auth-Type as CHAP. (In the log, you can see
"rlm_chap: Settin
Gandalf the Gray <[EMAIL PROTECTED]> wrote:
> I would like to submit user and password to my LDAP
> server, and this one have to check the right
> relationship!
LDAP is a database, not an authentication server.
FreeRADIUS is an authentication server.
> Now: is it possible to tell MSCHAP to u
thanks for the help until now!
I have another problem on freeradius, related to PEAP.
The MSCHAP module needs a couple user-pw to perform
authentication... and in the radiusd log I can read
that is not possible to retrieve a NT-password or
NL-password.
But I don't want to use such thing (I read
Gandalf the Gray <[EMAIL PROTECTED]> wrote:
> I checked and set a single IP address on my freeradius
> server.
> But it seems always the same result...
> this is my log by radiusd -X:
...
Which shows that the client is sending a duplicate request to the
server. i.e. the client is probably never
I changed the settings of the AP, allowing Aironet
Extensions and the result is a little different, now
TLS is performed, but it still doesn't work fine...
rad_recv: Access-Request packet from host
192.168.127.36:21646, id=158, length=145
User-Name = "fresh"
Framed-MTU = 1400
--- Alan DeKok <[EMAIL PROTECTED]> wrote:
> Gandalf the Gray <[EMAIL PROTECTED]> wrote:
> > It seems no EAP-challenge is really going on.
> > this is the output from tre radius server after a
> try
> > made by AEGIS client under windows XP, with PEAP
> > MSCHAPv2.
>
> The AEGIS client works w
Gandalf the Gray <[EMAIL PROTECTED]> wrote:
> It seems no EAP-challenge is really going on.
> this is the output from tre radius server after a try
> made by AEGIS client under windows XP, with PEAP
> MSCHAPv2.
The AEGIS client works with FreeRADIUS.
What the debug log shows Is that the clien
I forgot to explain the real problem!
I cannot authenticate any user, try to connect to my
network through a supplicant, both from Windows and
from WPA-supplicant under Linux.
It seems no EAP-challenge is really going on.
this is the output from tre radius server after a try
made by AEGIS client
I forgot to explain the real problem!
I cannot authenticate any user, try to connect to my
network through a supplicant, both from Windows and
from WPA-supplicant under Linux.
It seems no EAP-challenge is really going on.
this is the output from tre radius server after a try
made by AEGIS client
Hi, I'm new on this mailing list, please help me
clearly.
I need to build a Wireless-net based on Freeradius as
authentication server, a Cisco aironet 1200 AP, and
WPA with TKIP encryption.
I need to use TTLS or PEAP, for they allow users to
don't user their own certificates, to make connection
a
Abdul Lateef <[EMAIL PROTECTED]> wrote:
> xpgk-sip-auth4=b493b44cd7875041c11b92e638f74b2d
>
> But the Radius is not responding for this request and
> the log apearing
> SecurityDenial <>
Posting the same message multiple times, and ignoring a previous
answer is rude.
Go ask your NAS vendor
Hello,
I am trying to register Cisco SIP nas using MySql db.
But i could not. the cisco log is syaing :
SecurityDenial
Here is the format our cisco AccessRequest format:
Cisco VSA( 1):
xpgk-sip-auth4=b493b44cd7875041c11b92e638f74b2d
But the Radius is not responding for this request and
the lo
I have that problem...
Now I set MACAUTH feature in chillispot and auth my clients using MAC
but I dont know what about WPA sequrity in this feature... I just
haven't test it yet.
Dnia 12-04-2005, wto o godzinie 03:26 -0700, silvia troselj napisał(a):
> Hi,
>
> I have set up hotspot with radius a
Hi,
I have set up hotspot with radius authentication (AP
connected to freeradius server) and everything works
fine with clients that connect with wlan cards (PCI od
PCMCIA).
Problem is when client connecting with AP in client
mode. How can such user be authenticated with
freeradius?
Thanks,
Troky
?
... Miles Mawyer -=- Webmaster . Centralva.net ...
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brian Gao
Sent: Friday, April 01, 2005 11:31 AM
To: 'freeradius-users@lists.freeradius.org'
Subject: Auth problem (freeradius+mysql)
H
Title: Auth problem (freeradius+mysql)
Hi,
I have freeradius and mysql installed on my debian box, both of them are working fine.
But when I run command: radtest testing password localhost 17 radius
I got the messages like:
Sending Access-Request of id 129 to 127.0.0.1:1812
User
Mathias =?ISO-8859-1?Q?R=F6hl?= <[EMAIL PROTECTED]> wrote:
> > Since you are sending EAP, you should uncomment eap in both the
> > authorization and authentication section. See what that does for you.
> >
> I did this, but now there's no output and of course, no authentication
> or authorization.
Hi
DD, thx for the fast reply
> Since you are sending EAP, you should uncomment eap in both the
> authorization and authentication section. See what that does for you.
>
I did this, but now there's no output and of course, no authentication
or authorization.
May be I must edit the users
> Hi
>
> I tried to run fr with LDAP and MYSQL. It works with EAP/TLS fine, but
> with local Auth in the users file.
> Now I added into radiusd.conf
>
> --
> authorize {
> #
> #preprocess
> #chap
> #mschap
> #auth_log
>
Hi
I tried to run fr with LDAP and MYSQL. It works with EAP/TLS fine, but
with local Auth in the users file.
Now I added into radiusd.conf
--
authorize {
#
#preprocess
#chap
#mschap
#auth_log
ldap
#eap
Uh Silly Mistake.
I didnt take my tea today morning.
Thanks vipul / Alan Dekok
Regards,
On Mon, 2004-11-01 at 18:56, Vipul Ramani wrote:
> HI joe
>
> Well can u check out with u 1st table
> mysql> select * from radcheck;
> ++++---
"Joel n.solanki" <[EMAIL PROTECTED]> wrote:
> mysql> select * from radcheck;
> ++--+---+++
> | id | UserName | Attribute | op | Value |
> ++--+---+++
> | 1 | d2v | d2v123| == | d2vdy |
> | 2 | joel | jo
HI joe
Well can u check out with u 1st table
mysql> select * from radcheck;
++++--+--+
| id | UserName | Attribute | Value| Op |
++++--+
Dear all,
I have configured pppoe+ mysql with free-radius.
Now i have used the sql file camed along with free-radius source.
this is the file
freeradius-0.9.2/src/modules/rlm_sql/drivers/rlm_sql_mysql/db_mysql.sql
Now i made the database according to told by this document
http://www.frontios.com
Bartek Boczkaja <[EMAIL PROTECTED]> wrote:
> I have Freeradius 1.0 running on Linux. Users file contains only "Default
> Auth-Type = PAM", Clients file contains my whole subnet. I'd like to use it
> for 802.1x authentication with Cisco 2950 switch.
It's impossible.
PAM needs a clear-text pass
Hi all,
I have Freeradius 1.0 running on Linux. Users file contains only "Default
Auth-Type = PAM", Clients file contains my whole subnet. I'd like to use it
for 802.1x authentication with Cisco 2950 switch.
Radius config is OK - radtest launched from a server, using Cisco switch's
secret key wor
At 23.44 22/07/2004, you wrote:
Andrea Gabellini <[EMAIL PROTECTED]> wrote:
> But If I reject the request via the rlm_perl module (returning
> RLM_MODULE_REJECT) I can't see anything.
>
> In debug mode the server doesn't execute the post-auth module in such
> situation.
Try using the "Post-Auth-T
Andrea Gabellini <[EMAIL PROTECTED]> wrote:
> But If I reject the request via the rlm_perl module (returning
> RLM_MODULE_REJECT) I can't see anything.
>
> In debug mode the server doesn't execute the post-auth module in such
> situation.
Try using the "Post-Auth-Type Reject" block in 1.0.0.
Hi,
I have a little problem with the post-auth module.
If I reject the user from the user file or the sql module setting Auth-Type
= Reject, I can see the post-auth module writes to the sql.
But If I reject the request via the rlm_perl module (returning
RLM_MODULE_REJECT) I can't see anything.
Hi,
I have a little problem with the post-auth module.
If I reject the user from the user file or the sql module setting Auth-Type
= Reject, I can see the the post-auth module writes to the sql.
But If I reject the request via the Exec-Program-Wait (with an exit value
of 1) or via the rlm_perl m
"Markus Ebel" <[EMAIL PROTECTED]> wrote:
> users: Matched DEFAULT at 5
> modcall[authorize]: module "files" returns ok
So... what's that DEFAULT?
> rlm_chap: Could not find clear text password for user testuser
Yup. It couldn't find a password.
> It seems that the freeradius can't
.
- Original Message -
From: "Markus Ebel" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, June 17, 2004 2:52 PM
Subject: Solution for Auth-Problem
Hi,
i tried but i can´t find a solution of my auth-problem.
i try to connect to our Ascend Max2000 by
Hi,
i tried but i can´t find a solution of my auth-problem.
i try to connect to our Ascend Max2000 by a Windows-Client
with username and password and i´cant get it working
Here is the debug.
-- freeradius Debug --
rad_recv: Access-Request packet from host
ay 17, 2004 5:59 AM
To: [EMAIL PROTECTED]
Subject: Auth-Problem
Hi,
i´v e got a authentication-problem with a MAX2000 and freeradius.
Connetions-profiles configured on freeradius with CLID a working very
well.
Only those with username and passwort are making trouble:
(snip)
-
List info/subs
Hi,
i´v e got a authentication-problem with a MAX2000 and freeradius.
Connetions-profiles configured on freeradius with CLID a working very
well.
Only those with username and passwort are making trouble:
-- freeradius Debug --
rad_recv: Access-Request packet fro
Hi,
i´v e got a authentication-problem with a MAX2000 and freeradius.
Connetions-profiles configured on freeradius with CLID a working very
well.
Only those with username and passwort are making trouble:
-- freeradius Debug --
rad_recv: Access-Request packet from
96 matches
Mail list logo
