"matt morris" <[EMAIL PROTECTED]> wrote:
> Hmm, about the ip settings, Alan, I'm a bit confused. Last time I was told
> not to set a static ip in windows if I'm to give the supplicant a framed ip
Yes. I don't understand why you would set a static IP in the
Windows box, and then try to have th
e
"without TLV" issue. So there's no way to get around it if I want to use
PEAP-MSCHAPv2 in WinXP, except recoding?
TIA
From: "Alan DeKok" <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: PEAP - Unknown RADIUS packet Date: Tue, 13
matt morris" <[EMAIL PROTECTED]> wrote:
> Unfortunately, I ran into the ip problem again. If I'm using PEAP, the
> supplicant could not get an ip address (the ip is 169.254.1.34, subnet mask
> 255.255.0.0).
If you're using Framed-Netmask, you're using the wrong attribute.
See the FAQ.
> Also,
;re only auth_log, detail
and reply_log in the radacct subdir which I enabled in the conf file. What
are supposed to be written to the radius.log file?
TIA
From: "Alan DeKok" <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: PEAP - Unknown RADIUS pa
"matt morris" <[EMAIL PROTECTED]> wrote:
> Hi, I've been trying the PEAP authentication method (with mschapv2) using
> snapshot20040111, a Dlink DWL-900AP+ Access Point, and WinXP
> Supplicant(actually I'm using the driver software of Linksys WirelessG
> PCMCIA card to connect). The TLS portion
server got the tunnel reply there are these errors:
PEAP: Got tunnel reply RADIUS code 0
PEAP: Unknown RADIUS packet type 0: rejecting tunneled user
rlm_eap: Handler failed in EAP/PEAP
rlm_eap: Failed in EAP select
In the user file I created a user with Auth-Type := EAP, User-Password
="what
6 matches
Mail list logo
