Aziz YÜCELEN wrote:
I am setup freeradius again and not edit default configuration, I am
trying configure inner-tunnel but result didn't change. How to configure
inner-tunnel file for ttls thanks.
You don't configure it. The default installation of the server
configures it.
The debug log
Aziz YÜCELEN wrote:
I am setup freeradius again and not edit default configuration, I am
trying configure inner-tunnel but result didn't change. How to configure
inner-tunnel file for ttls thanks.
You don't configure it. The default installation of the server
configures it.
Aziz YÜCELEN wrote:
I am setup again and dont configure defaullts.Run radiusd -X and
receive user reject, output is below. Thanks for all.
...
Sending tunneled request
EAP-Message = 0x0211000b0164656e656d65
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = deneme
server
You need to delete *everything* from the current installation.
Binaries, libraries, configuration files, the whole raddb/ directory.
Then re-install, and don't mangle the configuration again.
Alan DeKok.
hi
radtest is ok and output below but pc is not ; maybe pc 8021x configration
Aziz YÜCELEN wrote:
radtest is ok and output below but pc is not ; maybe pc 8021x
configration is incorrect. How do I configure correctly it Thanks
If you are not going to follow the instructions on this list, there is
no point in asking questions.
You have been told multiple times what
Aziz YÜCELEN wrote:
I am using freeradius version 2.1.4 and I want to set up config to eap
TTLS using users and clients file but didnt work.Please help me.Thanks.
The FAQ says to post the debug output, *not* a heavily edited version.
The FAQ does *not* say to post the configuration.
Hi
Sorry for my carelessness. Debug output is here and I am using eap TTLS but
login not success.Please help me thanks.
rad_recv: Access-Request packet from host 10.1.1.252 port 1206, id=20,
length=183 User-Name = denemeNAS-IP-Address = 10.1.1.252
NAS-Port = 0
Aziz YÜCELEN wrote:
Hi
Sorry for my carelessness. Debug output is here and I am using eap TTLS
but login not success.Please help me thanks.
...
server inner-tunnel {
No authenticate method (Auth-Type) configuration found for the request:
Rejecting the user
Failed to authenticate the
server inner-tunnel {
No authenticate method (Auth-Type) configuration found for the request:
Rejecting the user
Failed to authenticate the user.
} # server inner-tunnel
You have edited the default configuration and broken it. Don't do that.
You need the inner-tunnel virtual
9 matches
Mail list logo