Hi, Ivan.
Yes, my output now is showing:
Sending Access-Accept of id 128 to 200.133.204.64 port 21645
Service-Type := NAS-Prompt-User
And how should I debug ip ssh. I've used the tcpdump to catch the
traffic through eth0. Did you mean that? If it's affirmative, see the
tcpdump output
Yes, my output now is showing:
Sending Access-Accept of id 128 to 200.133.204.64 port 21645
Service-Type := NAS-Prompt-User
Then freeradius works.
And how should I debug ip ssh.
Oh dear, let me guess: you don't know much about Cisco admin? Well start
with this:
Hi, guys.
Please, could someone read this output from freeradius' debugging mode to help
me? Thanks in advance.
(I just omitted some informations such as IP, User-Password etc)
My scenario is:
- Server: Debian GNU/Linux lenny x86_64 kernel 2.6.26-2-amd64
- Freeradius 2.0.4
- MySQL 5.0.51a
-
Wagner Pereira wrote:
I think this output is more complete and useful. Thank you one more time.
You haven't said what is going wrong, or what you want it to do.
The debug log shows an Access-Accept. What's wrong with that?
Alan DeKok.
-
List info/subscribe/unsubscribe? See
Alan,
I've tried to authenticate an user (myself!) in a Cisco6500 router.
Then, in this router, I configured the necessary lines to authenticate
myself in other server, where the freeradius is. I set this freeradius
up to "talk" with my mysql database.
--
Wagner Pereira
PoP-SP/RNP - Ponto
I think this picture can help YOU to help ME : )
This represents how my radgroupreply table, on my MySQL database, was
set up.
Mensagem original
Assunto:
Re: [Fwd: I need some help with freeradius 2.0.4]
Data:
Wed, 11 Nov 2009 12
On 11/11/2009 12:12 PM, Wagner Pereira wrote:
I think this picture can help YOU to help ME : )
Please do not send images to the list. Please use text instead.
--
John Dennis jden...@redhat.com
Looking to carve out IT costs?
www.redhat.com/carveoutcosts/
-
List info/subscribe/unsubscribe?
11/11/2009 08:12 PM, Wagner Pereira::
I think this picture
Uh???
Your computer doesnt let you copy/paste as text MySQL output???
--
Architecte Informatique chez Blueline/Gulfsat:
Administration Systeme, Recherche Developpement
+261 33 11 207 36
-
Ok, John. It's understood.
--
Wagner Pereira
PoP-SP/RNP - Ponto de Presença da RNP em São Paulo
CCE/USP - Centro de Computação Eletrônica da Universidade de São Paulo
http://www.pop-sp.rnp.br
(11) 3091-8902
John Dennis escreveu:
On 11/11/2009 12:12 PM, Wagner Pereira wrote:
I think this
Hi, Rakotomandimby.
What you meant with text MySQL output? How should I do that?
--
Wagner Pereira
PoP-SP/RNP - Ponto de Presença da RNP em São Paulo
CCE/USP - Centro de Computação Eletrônica da Universidade de São Paulo
http://www.pop-sp.rnp.br
(11) 3091-8902
Rakotomandimby Mihamina
Please, could someone read this output from freeradius' debugging mode to
help me? Thanks in advance.
My scenario is:
- Server: Debian GNU/Linux lenny x86_64 kernel 2.6.26-2-amd64
- Freeradius 2.0.4
- MySQL 5.0.51a
- Calling Station: Windows XP Professional 32 bits SP3
- Software client:
What you meant with text MySQL output? How should I do that?
By the amazing technique od copy/paste.
Ivan Kalik
Kalik Informatika ISP
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Funny! : ) but what output should I copy/paste here? from freeradius
-X ? I already did that in my first message sent to freeradius-users.
If necessary, I can paste it again.
--
Wagner Pereira
PoP-SP/RNP - Ponto de Presena da RNP em So Paulo
CCE/USP - Centro de Computao Eletrnica da
Funny!nbsp; : ) but what output should I copy/paste here? from freeradius
-X ? I already did that in my first message sent to freeradius-users.
If necessary, I can paste it again.br
pre class=moz-signature cols=72--
Wagner Pereira
For starters read this:
Ivan,
I did what you recommended (I guess). See below:
mysql select * from radgroupreply;
++---+++---+--+
| id | groupname | attribute | op | value |
Prio |
++---+++---+--+
!DOCTYPE html PUBLIC -//W3C//DTD HTML 4.01 Transitional//EN
Enough with that HTML It produces extraordinary ammount of crap as you
can see:
I did what you recommended (I guess). See below:br
No, you didn't. But getting closer.
|nbsp; 1 | pop-spnbsp;nbsp;nbsp; | Framed-Compression | := |
exec default none
aaa accounting exec default start-stop group radius
ip radius source-interface Loopback0
radius-server key 7 111D1C1603175A5E57
Mensagem original
Assunto:
Re: [Fwd: I need some help with freeradius 2.0.4]
Data:
Wed, 11
Wagner Pereira wrote:
Dear colleagues,
I am introducing now a new information. Below is what is declared into my IOS -
Cisco 6500. Is this correct?
Why don't you just read the cisco wiki page.
Ivan Kalik
Kalik Informatika ISP
-
List info/subscribe/unsubscribe? See
Ok, Ivan. I guess I removed that HTML craps now : )
Below is my new radgroupreply:
mysql select * from radgroupreply;
++---+---++---+--+
| id | groupname | attribute | op | value | Prio |
Ivan,
I already read the Cisco wiki page and I implemented what they
recommend, but it's not working yet.
--
Wagner Pereira
PoP-SP/RNP - Ponto de Presença da RNP em São Paulo
CCE/USP - Centro de Computação Eletrônica da Universidade de São Paulo
http://www.pop-sp.rnp.br
(11) 3091-8902
I already read the Cisco wiki page and I implemented what they
recommend, but it's not working yet.
Does the debug now show Nas-Prompt-User in Access-Accept packet? If it
does - it's some problem on the router - debug ip ssh.
Ivan Kalik
Kalik Informatika ISP
-
List
this is the debug for user jvidal and the user didn`t found
rad_recv: Access-Request packet from host 192.168.0.2:1035, id=100,
length=154
User-Name = jvidal
NAS-IP-Address = 192.168.0.2
NAS-Port = 3
Called-Station-Id = 00-1E-2A-3C-D2-90:NETGEAR2
this is the debug for user jvidal and the user didn`t found
rad_recv: Access-Request packet from host 192.168.0.2:1035, id=100,
length=154
User-Name = jvidal
NAS-IP-Address = 192.168.0.2
NAS-Port = 3
Called-Station-Id = 00-1E-2A-3C-D2-90:NETGEAR2
Ivan,
Here where are using freeradius to autenticate from an access point in a
wireless network. That is why eap is enable.
El mié, 24-12-2008 a las 15:24 +0100, t...@kalik.net escribió:
this is the debug for user jvidal and the user didn`t found
rad_recv: Access-Request packet from
Here where are using freeradius to autenticate from an access point in a
wireless network. That is why eap is enable.
You haven't imported the ca certificate onto the users machine. And you
are using an outdated freeradius version.
Ivan Kalik
Kalik Informatika ISP
-
List
El lun, 22-12-2008 a las 23:43 +0100, t...@kalik.net escribió:
Why User-Password? Freeradius version?
Freeradius' version is 1.1.7
It should be Cleartext-Password.
This change make that Calling-Station-Id function?
Is it possible to check mac address and password at the same time?
I
El mar, 23-12-2008 a las 14:32 +0100, t...@kalik.net escribió:
This change make that Calling-Station-Id function?
Is it possible to check mac address and password at the same time?
Yes.
I changed to Cleartext-Password and rdcheck is like that:
mysql select * from radcheck where UserName =
Enrique Acosta wrote:
But radius.log is reporting this:
Stop looking at radiusd.log. Look at the debug output, as suggested
in the FAQ, README, INSTALL, and nearly daily on this list.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
mysql select * from radcheck where UserName = 'jvidal';
+-+--+++---+
| id | UserName | Attribute | op | Value |
+-+--+++---+
| 116 | jvidal | Cleartext-Password | := |
Ivan, Thanks for replying...
El sáb, 20-12-2008 a las 03:31 +0100, t...@kalik.net escribió:
Although in radcheck this user has the following information:
+-+--+++---+
| id | UserName | Attribute | op | Value |
|
Why User-Password? Freeradius version?
Freeradius' version is 1.1.7
It should be Cleartext-Password.
Ivan Kalik
Kalik Informatika ISP
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hello Alan an members of the list,
We are using freeradius and we have the following situation
authenticating in wireless access
A single user have records on radcheck of Password and
Calling-Station-Id but when this user try to logging the server
response :
Fri Dec 19 13:24:41 2008 : Info:
Although in radcheck this user has the following information:
+-+--+++---+
| id | UserName | Attribute | op | Value |
|
+-+--+++---+
| 116 | jvidal | User-Password
33 matches
Mail list logo
