Hello everyone again!
Well as you may understand from the Subject I have a question about how
clients.conf works.
I´ve read the documentation in the file about how to add a client but when i
tired to add another client it stoped working.
I will try to explain how I have setup the
Hi,
How should I configure the clients.conf if I would
like that each nas, which want to connect to my Radius can do it.
Beacuse they have dinamic ip address, so I can't
set this in the clients.conf.
client 0.0.0.0{
secret= mysecret } any other attributes?
Thanks,
David
Hello,
i'm trying to run a freeradius-server on Suse 7.0
I have a new installation of freeradius 0.8.1
I changed the clients.conf and useres Files
I added "client 10.44.3.222{ secret = XXX nastype = other }" to clients.conf
and "username userpassword Password = "
Hi,
a/ Am I correct that freeradius looks at the IP address of the IP header
instead of the NAS-IP-Address in the clients.conf file?
b/ is [/etc/init.d/freeradius reload] in a cronjob a good way to reload the
clietns.conf file or is ther a setting inside freeradius that can do this
Or any other
Peter Carlstedt wrote:
> I have one radius server connected to a Netgear wired switch, from that
> switch I have a AP(Mikrotik) connected. What I am trying to do is to add
> the Mikrotik into the clients.conf file but when I do i get an error
> at startup(dont remember the error mess
Alan DeKok wrote:
>
> Asking questions on a public forum involves some simple etiquette.
> i.e. being willing to doo a *tiny* bit of work for yourself. And
> editing your email to remove 100's of lines of garbage.
>
Might be too complicated and sit more at the bottom end of the list of
"things
Hi there,
Is there someone who can point me in the direction of achieving this?,
I have searched google to find some posts that it is possible.
Ultimately it would be nice if we could store our nas information in
eDirectory and use ldap. However the mysql is another idea.
-
List info/subscr
Hello,
I can't get clients.conf confiugure and it have a very strange behavior (at
least to me). The
problem is the following:
1.If clients.conf contains
client 10.20.1.0/24 {
secret = shared_secret
sortname = WLAN
}
It ignores all the incoming connec
> Hi,
>
> How should I configure the clients.conf if I would like that each nas,
> which want to connect to my Radius can do it.
> Beacuse they have dinamic ip address, so I can't set this in the
> clients.conf.
Maybe you can use hostname and dns resover..
>
> clien
Hello,
I am a new FreeRADIUS user.
The server is working for us. However, I am wondering why it won't start if
I comment out the includes for clients.conf and proxy.conf. Even setting to
debug level 3 doesn't tell me why.
We are not proxying, and I have proxying turned off.
Also, t
Hi All,
I have a quick question on the shortname attribute for
clients: must it be unique among all clients?
Thanks in advance for your answers
Geoff.
___
Découvrez une nouvelle façon d
Hi,
I can't seem to find any reference to making the
contents of the clients.conf accessible via SQL. We are
constantly making edits, and having to constantly reload
the server doesn't make sense.
Pointers to where I missed putting it into
MySQL, or if anyone knows ho
Wry
On Monday, August 16, 2004, at 07:50 AM, Tobias Amon wrote:
Hello,
i'm trying to run a freeradius-server on Suse 7.0
I have a new installation of freeradius 0.8.1
I changed the clients.conf and useres Files
I added "client 10.44.3.222{ secret = XXX nastype = other }" to
clients.c
Hello,
I got a solution, but i donÄt know i fit fits your problem.
I changed the values at the false clients.conf . The clients.conf-file used by the
server
is in the /usr/local/etc/raddb/ directory . if not in your case try finding a
clients.conf file
useing "find -name clients.conf&qu
"Tobias Amon" <[EMAIL PROTECTED]> wrote:
> I have a new installation of freeradius 0.8.1
Do NOT use 0.8.1!
Use 1.0.0. If there's no package for your OS, try 0.9.3.
> testing with "radtest username userpassword 127.0.0.1 0 XXX" is no
> problem but testing with "radtest username userpassword
Hello everybody,
I wanted to only use nas table in the database in lieu of clients.conf, so,
I comment out the line in radiusd.conf :
#$include ...clients.conf
The server says nothing when it starts but it doesn't run
Do I make a mistake ?
Jean Frontin
System team
I R I T
Université
"David Luyens" <[EMAIL PROTECTED]> wrote:
> a/ Am I correct that freeradius looks at the IP address of the IP header
> instead of the NAS-IP-Address in the clients.conf file?
The NAS-IP-Address isn't used for anything.
The IP source address of the packet is what
Set to 'yes' to read radius clients from the database ('nas' table)
readclients = ...
Set it to "yes".
If you want to completely disable clients.conf, i.e. delete the file and make
the server not die because there is no client {} stanza, you will need a
littl
Hi.
Quick question. Is there any way to do some sort of allow all on
clients.conf. So FreeRadius wont care where the client is coming from,
as long as it has the secret.
The reason (obviously) is my radius server is external and NAS is on a
dynamic ip.
I can see why this might not be terribly
It seems that when I start radius in debug mode, it is correctly reading my
clients.conf file, but when I start it normally, it is not recognizing my
nas device. Its as if it's not reading the correct clients.conf. Any ideas
why this would be?
-will
-
List info/subscribe/unsubscribe? See
Well, you have "shortname" spelt incorrectly for a start.
Have you run the server in debug mode so that you can see exactly what
it is doing, and where it is dropping the request?
radiusd -X
cheers,
Mike
dev_null wrote:
Hello,
I can't get clients.conf confiugure and
Hello,
thanks for helping me :)
> Well, you have "shortname" spelt incorrectly for a start.
Sorry, that's not a copy/past from clients.conf, there it's correct. My fault
when typing this mail.
> Have you run the server in debug mode so that you can see exactly what
&
I have a hunch...
How many clients are in your clients.conf file? Is it just those two or
do you have any more? Are those the *first* two clients?
If you only have two clients, and its the two you listed there, try
putting the localhost (127.0.0.1) client declaration in first followed
by
localhost & 10.20.1.x
requests.
Could this be a bug in the 20050818 snapshot?
The only way it works is when including both and only 10.20.1.0/24 &
10.20.1.100 but it wont' work
if a third client is added. :(
- Original Message Follows -
I have a hunch...
How many clients a
Michael Griego <[EMAIL PROTECTED]> wrote:
> There has been some reworking of the clients code recently in CVS. I
> haven't looked at it much yet as it was done by Alan, but, as with all
> of the CVS tree, it's still considered unstable code.
I did some preliminary tests, but I'll try this cas
"dev_null" <[EMAIL PROTECTED]> wrote:
> The only way it works is when including both and only 10.20.1.0/24 &
> 10.20.1.100 but it wont' work if a third client is added. :(
I've tested that config, and ones with 500K clients. They all work
for me.
Alan DeKok.
-
List info/subscribe/unsubscri
Strange, I don't know why it won't work to me.
Ok. Never mind.
Thanks
- Original Message Follows -
> I've tested that config, and ones with 500K clients. They all work
> for me.
>
> Alan DeKok.
>
--
Naručite svoj XXLadsl - instalacija i modem i dalje za samo 1 kn!
Postanite i vi k
"dev_null" <[EMAIL PROTECTED]> wrote:
> Strange, I don't know why it won't work to me.
> Ok. Never mind.
Try from a fresh CVS checkout, and don't change anything other than
the "clients". If it's still a problem, it might be the inet_pton()
functions on your system.
Alan DeKok.
-
List info
Try a fresh CVS checkout or tonight's CVS snapshot and see if this
corrects your problems. Looks like there was a byte ordering problem
when sanitizing the client entry based on the netmask. This would only
have affected people with little-endian machines.
--Mike
Alan DeKok wrote:
"dev_nu
ECTED]
g] On Behalf Of Cliff Hayes
Sent: Freitag, 15. September 2006 18:07
To: freeradius-users@lists.freeradius.org
Subject: Proxy.conf & clients.conf
Hello,
I am a new FreeRADIUS user.
The server is working for us. However, I am wondering why it won't start if
I comment out th
Hi,
> how do you except the server to work if he doesn't know which clients are
> allowed to use it? Commenting out the proxy.conf should not affect the
> server if you do not need proxy features.
we have faced this same issue with clients.conf - which is a little
weird if you
: 'FreeRadius users mailing list'
Subject: RE: Proxy.conf & clients.conf
Hello,
how do you except the server to work if he doesn't know which clients are
allowed to use it? Commenting out the proxy.conf should not affect the
server if you do not need proxy features.
Regard
Hi,
> Also, the clients file is almost completely commented out except for the
> 127.0.0.1 section, which the directions say should be commented out anyway
> after testing.
just tested behaviour in 2.0 CVS pre release. you dont need to have
clients.conf
- its a 1.1.x issue that you a
[EMAIL PROTECTED]
Sent: Friday, September 15, 2006 3:24 PM
To: FreeRadius users mailing list
Subject: Re: Proxy.conf & clients.conf
Hi,
> Also, the clients file is almost completely commented out except for the
> 127.0.0.1 section, which the directions say should be commented out anyw
"Cliff Hayes" <[EMAIL PROTECTED]> wrote:
> I have proxy set to No, but if I comment out the include statement,
> FreeRADIUS will not start.
Presumably it prints out some kind of error message. What would that be?
Alan DeKok.
--
http://deployingradius.com - The web site of the book
Hi,
> Ok, thanks. But how about the include statement for proxy.conf?
>
> I have proxy set to No, but if I comment out the include statement,
> FreeRADIUS will not start.
>
> I am using MySQL database interface.
I cannot see such a problem with proxy.conf on either 1.1.3 or 2.0pre
alan
-
Lis
Hi,
> "Cliff Hayes" <[EMAIL PROTECTED]> wrote:
> > I have proxy set to No, but if I comment out the include statement,
> > FreeRADIUS will not start.
>
> Presumably it prints out some kind of error message. What would that be?
with the absent clients.conf
mber 15, 2006 4:26 PM
To: FreeRadius users mailing list
Subject: Re: Proxy.conf & clients.conf
"Cliff Hayes" <[EMAIL PROTECTED]> wrote:
> I have proxy set to No, but if I comment out the include statement,
> FreeRADIUS will not start.
Presumably it prints out some k
I have 1.1.2, so I'll have to upgrade. Thanks.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
Behalf Of [EMAIL PROTECTED]
Sent: Friday, September 15, 2006 4:40 PM
To: FreeRadius users mailing list
Subject: Re: Proxy.conf & clients.conf
Hi,
> Ok, than
"Mike May" <[EMAIL PROTECTED]> wrote:
> After the authn I set some authz like Cisco-AVPair =
> "priv-lvl=15" used by Cisco routers and switches for network engineers who
> live in the proper LDAP group, here is where the problem is. PIX firewalls
> do not like me setting the priv lvl, and the reas
Geoffroy Arnoud wrote:
> Hi All,
>
> I have a quick question on the shortname attribute for
> clients: must it be unique among all clients?
Nope. It's just used for printing. i.e. "look up client by IP... if
there's a short name, print it, else print the full name or IP"
Alan DeKok.
--
h
Hi,
Is there any easy way to convert a freeradius clients file to a clients.conf
file? I have several dozen entries in my clients file and if I have to
convert this by hand it's going to be a lot of typing...
Lisa Casey
-
List info/subscribe/unsubscribe? See http://www.freeradius.org
Morning Tuc,
On Dec 31, 2007 2:15 AM, Tuc at T-B-O-H.NET <[EMAIL PROTECTED]> wrote:
> Hi,
>
>I can't seem to find any reference to making the
> contents of the clients.conf accessible via SQL. We are
> constantly making edits,
Have you thought about using a
Greetings,
We are trying to authenticate user request coming from many APs. The plan is
to authenticate the APs as well as the users centrally using freeradius. We
were hoping if we could configure clients.conf with MAC-address instead of
IP address for every AP. This will ensure MAC-address with
#client 192.168.0.0/24 {
# secret = testing123-1
# shortname = private-network-1
#}
#
l#cient 192.168.0.0/16 {
# secret = testing123-2
# shortname = private-network-2
#}
I copied this from clients.conf, can anybody tell me what is 16 and 24 in
You must have in your nas table the nas-user (IP,type etc) and in
clients.conf you must have it like this
client 194.219.120.83 {
secret = ugabuga
shortname = GNUGK
nastype = cisco
}
the radiusd.conf need to include the client.conf
Kyriaki Gali,
IT Applications
hi , I m playing with freeradius and openldap .
I ll manage all my radius system on ldap.
I made a perl script whi reads radiusd.conf and
rewrites on fly the clients.conf file .
For this I added a new objectclass RadiusClient on my
onpenldap .
Do you kmow if somebody works in the same direction
Hi, I made a fresh install of FreeRadius 1.0.2 and I was wondering if
the NAS mysql table is a replacement for the clients.conf file (that
would be great, and a lot easier to administrate).
If so, where do I set the NAS IP? Do I need to make any changes to the
.conf files so FreeRadius only
would this work?
...
client 123.123.123.0/24 {
secret = notVery
shortname = test_throughly
}
On Wed, 2005-05-04 at 07:33, Jacques wrote:
> Hi.
>
> Quick question. Is there any way to do some sort of allow all on
> clients.conf. So FreeRadius wont care where the clie
05-05-04 at 07:33, Jacques wrote:
> > Hi.
> >
> > Quick question. Is there any way to do some sort of allow all on
> > clients.conf. So FreeRadius wont care where the client is coming from,
> > as long as it has the secret.
> >
> > The reason (obviously) is my radius s
Jacques <[EMAIL PROTECTED]> wrote:
> My question now is... why is this a "HORRIBLE" idea as Alan put it?
Because it opens up the server to more attacks. The RADIUS protocol
isn't secure enough to correctly enable ip/netmask for clients.
It works, but it's not a good idea.
Alan DeKok.
-
On Wed, May 04, 2005 at 06:33:13AM -0700, Jacques wrote:
> Hi.
> Quick question. Is there any way to do some sort of allow all on
> clients.conf. So FreeRadius wont care where the client is coming from,
> as long as it has the secret.
> The reason (obviously) is my radius server
"Will Carter" <[EMAIL PROTECTED]> wrote:
> It seems that when I start radius in debug mode, it is correctly reading my
> clients.conf file, but when I start it normally, it is not recognizing my
> nas device. Its as if it's not reading the correct clients.conf.
is it possible specify IP ranges in the clients.conf? or multiple IPs for
each client{} section?
for example:
client 1.2.3.0/23 {
secret = shared_secret
shortname = abc.def.ghi.jkl
nastype = other
}
or
client 1.2.3.1 {
secret = shared_secret
shortname
ginal Message Follows -
> I have a hunch...
>
> How many clients are in your clients.conf file? Is it just those two or
> do you have any more? Are those the *first* two clients?
>
> If you only have two clients, and its the two you listed there, try
> putting the localhost
Hi,
Is it possible to replace clients.conf with an SQL table? I assume that
is what the NAS table is for in the schema, but I have seen no mention
of it being used, or any documentation, for it on the web.
If it is possible could you please provide me with an example setup.
Cheers, Ben
-
List
Hi,
Does anybody know how I can add NAS-ID instead of
NAS-IP Address for identification?
In other words if NAS-ID and secret matches then its
as good as matching NAS-IP Address and secret.
Thanks.
With regards,
Prabh
__
Hi,
iam just wondering if there are any "size" limitations on the
clients.conf file.
Background is:
The current file consist of many /24 net-ranges and is currently 22k big ;)
For the past days I recognised some strange activities but unfortunately
only saw the
following in the log:
Hi,
I have created one hotspot with a openwrt router and chillispot. I use a
remote server radius (freeradius) for authenticate users of hotspot.
I have inserted in clients.conf Ip of the router:
clients 82.256.52.11 {
secret = testing123
shortname = test
}
With this
Lisa Casey wrote:
Hi,
Is there any easy way to convert a freeradius clients file to a clients.conf
file? I have several dozen entries in my clients file and if I have to
convert this by hand it's going to be a lot of typing...
Lisa Casey
Attached are a couple of ugly Perl scripts I
Hello,
Our network group is going to be changing the 'secret' for all of
their gear but they are going to do it in stages. I was wondering if
there is a way to have two 'secret' entries in the clients.conf file.
Leave the original until the change is complete and ha
On Jul 21, 2011, at 3:54 AM, Andy Zarzycki wrote:
> Greetings,
>
> We are trying to authenticate user request coming from many APs. The plan is
> to authenticate the APs as well as the users centrally using freeradius. We
> were hoping if we could configure clients.conf w
the sample configurations or a quick review of
the documentation as it relates to clients.conf.
So my questions are
1.) Are the keywords lifetime and idle_timeout supported in clients.conf?
2.) If they are, is there a known bug that would cause them to not work?
3.) If they aren't, would there b
ate-network-2
> #}
>
> I copied this from clients.conf, can anybody tell me what is 16 and 24 in
> client 192.168.0.0/*24*
> cient 192.168.0.0/*16*
Subnet mask.
If you don't know what that is, start by reading
http://en.wikipedia.org/wiki/Subnetwork and
http://en.wikipedia.org
Thank you so much fajar :)
The link is very useful :)
--
View this message in context:
http://freeradius.1045715.n5.nabble.com/Some-information-about-clients-conf-tp5713634p5713636.html
Sent from the FreeRadius - User mailing list archive at Nabble.com.
-
List info/subscribe/unsubscribe? See http
I'm running FR 2.0.3 and I just found that if there is more than one
client with the same IP address in clients.conf, then it will stop
processing the remainder of the file and continue startup. The only
indication it has done this are 2 error messages that are easily missed
when running
Morning,
I saw there was a talbe named "nas". Is it the mirror of "clients.conf" file ?
Does freeradius use it to administrate clients ?
In this table there is a column named "nasname" is it the equivalent of
"clients" in "clients.conf" file ?
On Mon, 22 Nov 2004, eric german wrote:
hi , I m playing with freeradius and openldap .
I ll manage all my radius system on ldap.
I made a perl script whi reads radiusd.conf and
rewrites on fly the clients.conf file .
For this I added a new objectclass RadiusClient on my
onpenldap .
Do you kmow
I can try to port it in rlm_ldap.c but , I need some
help on freeradius and in c language .
first question :
-I must patch rlm_ldap or an another module ?(the
module reading clients.conf ? ) .
- I don't know very well freeradius arch (one month
ago) .
thanks
eric german
--- Kostas Kal
On Tue, 23 Nov 2004, eric german wrote:
I can try to port it in rlm_ldap.c but , I need some
help on freeradius and in c language .
first question :
-I must patch rlm_ldap or an another module ?(the
module reading clients.conf ? ) .
- I don't know very well freeradius arch (one mont
a
response Access-Accept
(I had some problems here because I wasn't able to get an accept using
localhost instead of 127.0.0.1 ...)
I'm now in the next step.
I want to change the secret in clients.conf, so I made the change:
#secret = testing123
secret = abracadabra
I stopped radiu
Hi, folks.
My scenario has a Cisco NAS authenticating in a Debian lenny running
FreeRADIUS (which is using the /etc/passwd method).
I must to give access to some users just in a specific NASes.
I noticed that, even if I haven't the entry in clients.conf file for my
NAS, like
status of integrating clients.conf in LDAP
storage now, four years later from that discussion?
This integration is interesting and makes the configuration more
centralized.
thanks
michal
--
Ing. Michal Bruncko, CCNP
Linux systems and network administrator
Coupled school of business and services
ature for the future ?
I think the easiest way is to configure the name
of the auth files into the clients.conf
NAS1 : file: users
NAS2 : file: users2, etc..
With this type of config, we can easily manage
multiple type of users/ auth with one radiusd
on one port..
Nico
-
List info/s
Hello List:
Would it be valid to list a host twice in clients.conf. Each listing would
have a unique shared secret and shortname?
Reason for doing this.
host 192.168.1.1 has two applications that run. One is a NMS monitoring
package (sends rad packets to the radius server to verify it
I have a situation when some of my 'nas's will have dynamic ip address's.
So, I could use a generalized case to allow my radius server to listen..
something like this.
client 0.0.0.0/0 {
secret = test
-
I guess this would be ok, if I had lots of nas's.
- Original Message -
From: "Patricio Marin" <[EMAIL PROTECTED]>
To:
Sent: Wednesday, February 23, 2005 8:39 PM
Subject: NAS table replaces clients.conf?
> Hi, I made a fresh install of FreeRadius 1.0.2 and I was wondering if
> the NAS mysql table is a replacemen
Hi,
I have two questions about the clients.conf file:
_ when I define a client on this file, I need to
write the ip or the hostname or a network... it's possible to enable all client
to execute an AAA request (it's for testing) ?
_ it's possible to move t
iq Rashid
> Sent: 10 August 2005 11:08
> To: 'FreeRadius users mailing list'
> Subject: ip ranges in clients.conf
>
>
> is it possible specify IP ranges in the clients.conf? or multiple IPs
for
> each client{} section?
>
> for example:
>
>
Hi,
Am I to take it that it is not possible to use SQL for the clients.conf
file? And if that it the case could someone please explain what the nas
table is for in the database schema?
Cheers, Ben
On Wed, 2005-09-14 at 22:42 +0100, Ben Dowling wrote:
> Hi,
>
> Is it possible t
On Wed, 2005-09-14 at 22:42 +0100, Ben Dowling wrote:
> Hi,
>
> Is it possible to replace clients.conf with an SQL table? I assume that
> is what the NAS table is for in the schema, but I have seen no mention
> of it being used, or any documentation, for it on the web.
>
&
> Am I to take it that it is not possible to use SQL for the clients.conf
> file? And if that it the case could someone please explain what the nas
> table is for in the database schema?
It's possible. You do need at least one entry in "clients.conf",
though. I sug
On Thu, 2005-15-09 at 15:08 -0400, Alan DeKok wrote:
> > Am I to take it that it is not possible to use SQL for the clients.conf
> > file? And if that it the case could someone please explain what the nas
> > table is for in the database schema?
>
> It's possib
Clients aren't matched on any attributes (such as NAS-IP-Address).
They're matched on the source IP address of the RADIUS packet.
--Mike
On Thu, 2004-06-10 at 07:49, Prabhdeep wrote:
> Hi,
> Does anybody know how I can add NAS-ID instead of
> NAS-IP Address for identification?
>
> In other wor
- Original Message -
From: "Michael Griego" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, June 10, 2004 2:52 PM
Subject: Re: NAS Id and clients.conf
> Clients aren't matched on any attributes (such as NAS-IP-Address).
> They're m
Hi guys
I was just wondering why we have a nas table in mysql when it doesn't act
like clients.conf ive tried putting nas details into the nas config with out
any nas's in clients.conf but radius does not start so, what is the nas
table actually for then?
-
List info/subscribe/u
Alexander Papenburg wrote:
> iam just wondering if there are any "size" limitations on the
> clients.conf file.
How much memory do you have? That's the limit.
> Background is:
> The current file consist of many /24 net-ranges and is currently 22k big ;)
> For t
Alan DeKok schrieb:
Alexander Papenburg wrote:
iam just wondering if there are any "size" limitations on the
clients.conf file.
How much memory do you have? That's the limit.
Background is:
The current file consist of many /24 net-ranges and is currently 22k
On Sun 22 Apr 2007, Alexander Papenburg wrote:
> Hi,
>
> iam just wondering if there are any "size" limitations on the
> clients.conf file.
>
> Background is:
> The current file consist of many /24 net-ranges and is currently 22k big
> ;) For the past days I reco
Hi,
> I have created one hotspot with a openwrt router and chillispot. I use a
> remote server radius (freeradius) for authenticate users of hotspot.
use a VPN between the 2 systems - then you can simply use the VPN tunnel
addresses for each system to talk to each other - securely!
openvpn works
Hi,
just a guess:
Ensure that you have following line radiusd.conf:
hostname_lookups = yes
Milan Holub
holub (at) thenet (dot) ch
--
TheNet-Internet Services AG,
im Bernertechnopark, Morgenstr. 129
CH-3018, Bern, Switzerland
031 998 4333, Fax 031 998 4330
1:29 AM
Subject: Re: dyndns.org domain in Clients.conf
Hi,
just a guess:
Ensure that you have following line radiusd.conf:
hostname_lookups = yes
Milan Holub
holub (at) thenet (dot) ch
--
TheNet-Internet Services AG,
im Bernertechnopark, Morgenstr. 129
CH-
AS Alex wrote:
> Yes i have enabled hostname_lookups but nothing.
>
> For VPN...can be an idea but without vpn it's possibile to realize what
> i need??
No.
RADIUS clients are identified by IP addresses, not host names. If the
IP address changes while the server is running, you must HUP or
On 5/4/07, AS Alex <[EMAIL PROTECTED]> wrote:
Yes i have enabled hostname_lookups but nothing.
Hostname lookups are only done at FR startup, so as soon as the ip changes
you have a problem :-)
Use the Nas identifier attribute.
Kind regards,
Yves
-
List info/subscribe/unsubscribe? See http:
Hello black,
Friday, May 04, 2007, 12:18:00 PM, you wrote:
black devils> Hi,
black devils> I have created one hotspot with a openwrt router and chillispot.
I use a
black devils> remote server radius (freeradius) for authenticate users of
hotspot.
Move your clients.conf to SQL data
How i can use nas identifier attribute?? client.conf needs an ip however ??
i'm very confused.
- Original Message -
*From:* YvesDM <[EMAIL PROTECTED]>
*To:* FreeRadius users mailing list
*Sent:* Friday, May 04, 2007 1:21 PM
*Subject:* Re: dyndns.org domain in Clients.conf
How i can use nas identifier attribute?? client.conf needs an ip however ?? i'm
very confused.
- Original Message -
From: YvesDM
To: FreeRadius users mailing list
Sent: Friday, May 04, 2007 1:21 PM
Subject: Re: dyndns.org domain in Clients.conf
On 5/4/07, AS
On 5/8/07, alessio <[EMAIL PROTECTED]> wrote:
How i can use nas identifier attribute?? client.conf needs an ip however
?? i'm very confused.
In clients.conf use 0.0.0.0/0 and make sure your shared secret is long and
strong.
Use mysql and add a field 'NASIdentifier' in
Hi!
YvesDM wrote:
> How i can use nas identifier attribute?? client.conf needs an ip
> however ?? i'm very confused.
>
> In clients.conf use 0.0.0.0/0 and make sure your
> shared secret is long and strong.
A small note if you really want to do this: in 2.0, this
On 5/8/07, [EMAIL PROTECTED] <
[EMAIL PROTECTED]> wrote:
Hi!
YvesDM wrote:
> How i can use nas identifier attribute?? client.conf needs an ip
> however ?? i'm very confused.
>
> In clients.conf use 0.0.0.0/0 and make sure your
> shared secret is long and st
1 - 100 of 241 matches
Mail list logo