sorry here is ONLY the authenticate{ section...
commenting out pam, unix, ldap, won't fix it,
commenting out all but ldap won't fix it, etc...
authenticate {
#
# PAP authentication, when a back-end database
listed
# in the 'authorize' section supplies a password.
The
ok, as soon as I uncomment the two following lines
from /etc/ppp/options.pptpd, I can no longer connect
with anything to poptop...
#plugin /usr/lib/pppd/2.4.3/radius.so
#radius-config-file
/etc/radiusclient/radiusclient.conf
even though I set up freeradius for ldap, and if I use
radtest with an
Greetings,
Can u please check with radiusd -X with debugging mode n try to check
all thing again..so u will get extact where u stuck.
just run command: radius -X
after try to authenticat with local n see wht debugging output show
and after try to using poptop and check radius debug , if still u r
John H. [EMAIL PROTECTED] wrote:
so what's the deal? I am using mschap2, and when I
use radius plugin, it says
Aug 29 03:55:11 server1 pppd[8736]: Peer username
failed CHAP authentication
Are you interested at all in *why* the server rejected the user? If
so, why are you not running
rad_recv: Access-Request packet from host
127.0.0.1:32816, id=48, length=134
Service-Type = Framed-User
Framed-Protocol = PPP
User-Name = username
MS-CHAP-Challenge =
0xd8eab5fef18737279d246e8e682741b6
MS-CHAP2-Response =
John H. [EMAIL PROTECTED] wrote:
...
There is a LOT more information than that available in debugging mode.
Please read the README, INSTALL, and FAQ about how to run the server
in debugging mode.
Alan DeKok.
-
List info/subscribe/unsubscribe? See
Is it this line that is causing the problem(from
debug)
Processing the authenticate section of radiusd.conf
modcall: entering group Auth-Type for request 0
WARNING! Asked to process empty group. Returning
reject.
how do i fix that? Is it talking about my LDAP group?
I know that is
John H. [EMAIL PROTECTED] wrote:
I ran it in debugging mode, with -x(which is partial
debugging mode), but as you wish, here it is with -X.
I don't need read every documentation in existance to
do radiusd --help.
I'm sorry, but that's suggested nearly daily on this list. It's in
the main
John H. [EMAIL PROTECTED] wrote:
Is it this line that is causing the problem(from
debug)
Processing the authenticate section of radiusd.conf
modcall: entering group Auth-Type for request 0
WARNING! Asked to process empty group. Returning
reject.
Yes, that's the problem.
how do i
##
## radiusd.conf -- FreeRADIUS server configuration
file.
##
## http://www.freeradius.org/
## $Id: radiusd.conf.in,v 1.188 2004/05/13 20:10:19
pnixon Exp $
##
# The location of other config files and
# logfiles are declared in this file
#
# Also general configuration
sorry, i was told by someone else they might be able
to see it from a lower case -x
--- Alan DeKok [EMAIL PROTECTED] wrote:
John H. [EMAIL PROTECTED] wrote:
I ran it in debugging mode, with -x(which is
partial
debugging mode), but as you wish, here it is with
-X.
I don't need read
11 matches
Mail list logo
