*Hi,
i have changed the openzap.conf file but still i get the same error
**[span wanpipe 1]
number = 1
trunk_type = e1
b-channel = 1:1-15
d-channel = 1:16
b-channel = 1:17-31*
*
freeswi...@localhost.localdomain load mod_libpri
API CALL [load(mod_libpri)] output:
-ERR [module load file routine
hi all
freeswitch support PCMU only?
i follow the http://wiki.freeswitch.org/wiki/Codecs#sofia.conf.xml,
but freeswitch still support PCMU only,
below is the trace:
2009-07-01 14:39:35.571364 [DEBUG] sofia_glue.c:3070 Audio Codec
Compare
-- Forwarded message --
From: qian ma god.nirv...@gmail.com
Date: 2009/7/1
Subject: freeswitch support PCMU only?
To: Freeswitch-users@lists.freeswitch.org
Freeswitch-users@lists.freeswitch.org
hi all
freeswitch support PCMU only?
i follow the
absolutely not.
codec negotiate depending on your conf. do you have a sip trace?
On Jul 1, 2009, at 2:48 PM, qian ma wrote:
hi all
freeswitch support PCMU only?
i follow the http://wiki.freeswitch.org/wiki/Codecs#sofia.conf.xml
, but freeswitch still support PCMU only,
Look more closely at the output. It looks like mod_libpri.so didn't
get installed properly. I think this is a bug in the ozmod_libpri
build. For now just locate that missing .so file in your oz build
environment and copy it to the freeswitch/mod directory and try again.
-MC
Sent from my
fs can support lots of codecs. you can find the ff variables defined in
vars.xml:
global_codec_prefs
outbound_codec_prefs
then look for inbound_codec_negotiation in
sip_profiles/internal.xml,sip_profiles/external.xml if you want your
codec_prefs to set priority or not.
-nandy
On Wed, Jul 1,
thanks for your replies.
my var.xml:
X-PRE-PROCESS cmd=set data=global_codec_prefs=PCMA/
X-PRE-PROCESS cmd=set data=outbound_codec_prefs=PCMA,GSM,iLBC/
below is the sip trace:
recv 781 bytes from udp/[58.212.219.104]:40508 at 07:42:37.086711:
seven,
of course, codec negotiation depends on the order of codecs in the
*_codec_prefs variables. but, the opposite end has also it's own codecs
prefs, too. fs can accept the other end's prefs
(inbound_codec_negotiation=generous) or imposes it's own prefs (=greedy).
you must include the codec in
Is there any work planned for T.38 termination (in mod_fax)?
François.
On Tue, 2009-06-30 at 12:07 -0400, Michael Jerris wrote:
We currently support t.38 passthrough only using proxy_media mode. T.
38 gateway is on the roadmap but not yet close to complete.
Mike
On Jun 30, 2009, at
Mitchel Constantin mythical...@weavver.com wrote:
5. My phones now register using the correct domain name (i.e. weavver.com)
instead of the IP address (205.134.225.20) as the domain.
6. Now the problem... My originate command no longer works using the new
syntax: originate
François Delawarde fdelawa...@wirelessmundi.com wrote:
Is there any work planned for T.38 termination (in mod_fax)?
Yes, as discussed on the mailing list recently.
If you're volunteering to help, I'm sure the FreeSWITCH developers would
appreciate contributions of code.
Jason White ja...@jasonjgw.net wrote:
originate user/1...@example.com 3000
to connext u...@example.com to extension 3000.
That should read to connect 1...@example.com to extension 3000.
___
Freeswitch-users mailing list
grep -ir 111 *
default/bad.xml: user id=111
default/bad.xml: variable name=accountcode value=111/
default/bad.xml: variable name=effective_caller_id_number value=111/
default.xml: user id=111 type=pointer/
default.xml:
group name=employers
users
user id=110 type=pointer/
user id=111
you FS doesn't accept PCMU. try to add PCMU on both variables.
On Wed, Jul 1, 2009 at 3:44 PM, qian ma god.nirv...@gmail.com wrote:
thanks for your replies.
my var.xml:
X-PRE-PROCESS cmd=set data=global_codec_prefs=PCMA/
X-PRE-PROCESS cmd=set data=outbound_codec_prefs=PCMA,GSM,iLBC/
below
As title ,Does FS keep the status of gateways??
___
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
On Wed, Jul 1, 2009 at 6:56 PM, Alexey Lubimov lubi...@neolant.ru wrote:
grep -ir 111 *
default/bad.xml: user id=111
default/bad.xml: variable name=accountcode value=111/
default/bad.xml: variable name=effective_caller_id_number value=111/
default.xml: user id=111 type=pointer/
Brad Tuan brad.t...@gmail.com wrote:
As title ,Does FS keep the status of gateways??
sofia status gateway gateway-name
___
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
No, tag /include is exists.
include
user id=111
params
param name=password value=$${default_password}/
param name=vm-password value=$${default_vm_password}/
/params
variables
variable name=toll_allow value=domestic,international,local/
variable name=accountcode value=111/
variable
Thank You, Gonzalo!
freeswi...@internal reloadxml
+OK [Success]
2009-07-01 13:40:37.205835 [ERR] switch_xml.c:1282 Couldnt open
/opt/freeswitch/conf/directory/default/bad.xml (Permission denied)
ls -l
-rw-r- 1 root root 756 2009-06-30 16:39 bad.xml
-rw-r- 1 freeswitch daemon
or simply
sofia status
for all gateways
Jason White schrieb:
Brad Tuan brad.t...@gmail.com wrote:
As title ,Does FS keep the status of gateways??
sofia status gateway gateway-name
___
Freeswitch-users mailing list
I am writing this to let you know that this behavior
persists in the 1.0.4pre9.
Could the calls/sec issue be due to the single threaded nature of Sofia?
Because I am getting the feeling that the number of simultaneous
channels doesn't really burdens FS, but many Calls/sec does.
Apostolos
Great news! For what I could read, the most famous DSP programmer
worldwide (Steve) seems to be helping out for mod_fax.
I guess I should register to freeswitch-dev to monitor this closely.
Thanks,
François.
On Wed, 2009-07-01 at 18:38 +1000, Jason White wrote:
François Delawarde
Peter P GMX prometheus...@gmx.net wrote:
or simply
sofia status
for all gateways
and, from the shell,
fs_cli -x help helpfile
fs_cli -x sofia help helpfile
and any others you need so as to obtain synopses of all the commands that you
might need.
Hi
Freeswitch is being used in a scenario where two endpoints are running
traffic with bypass media mode. Performance is good and all things are
smooth.
But as the time goes after starting freeswitch, it starts consuming almost
whole of memory. Note , freeswitch is being started with -core
i want the fs accept the PCMA not PCMU.
i add PCMA in global_codec_prefs and outbound_codec_prefs, it doesn't
work. FS only accept PCMU.
why??
2009/7/1 Nandy Dagondon g...@i.ph
you FS doesn't accept PCMU. try to add PCMU on both variables.
On Wed, Jul 1, 2009 at 3:44 PM, qian ma
On 07/01/2009 08:29 AM, Muhammad Danish Moosa wrote:
Hi
Freeswitch is being used in a scenario where two endpoints are running
traffic with bypass media mode. Performance is good and all things are
smooth.
But as the time goes after starting freeswitch, it starts consuming
almost whole
check the value of inbound_codec_negotiation in the sip_profiles/*.xml
files. is it generous or greedy? you should also check if the endpoint
is offering PCMU.
On Wed, Jul 1, 2009 at 8:27 PM, qian ma god.nirv...@gmail.com wrote:
i want the fs accept the PCMA not PCMU.
i add PCMA in
sorry. i mean check the x-lite client if PCMA is enabled?
On Wed, Jul 1, 2009 at 9:14 PM, Nandy Dagondon g...@i.ph wrote:
check the value of inbound_codec_negotiation in the sip_profiles/*.xml
files. is it generous or greedy? you should also check if the endpoint
is offering PCMU.
On
inbound_codec_negotiation is generous
and the xlite PCMU is enabled.
my var.xml.conf:
X-PRE-PROCESS cmd=set data=global_codec_prefs=PCMA/
X-PRE-PROCESS cmd=set data=outbound_codec_prefs=PCMA/
2009/7/1 Nandy Dagondon g...@i.ph
sorry. i mean check the x-lite client if PCMA is enabled?
On
*Hi,
I have configured outbound call through JavaScript it is working fine but i
want the conversation to be recorded .
Javascript:
sessionA = new Session({ignore_early_media=true,
origination_uuid=+argv[0]+}sofia/default/sip:+argv[0]+@
192.168.1.135:5066);
sessionB = new
I'm about to wire Arsen the donated money for his work. Remember if
you haven't sent me what you have said you would send in please paypal br...@freeswitch.org
so I can wire it to Arsen.
Thanks,
Brian
Begin forwarded message:
I would like to announce the availability of PocketSphinx ASR
There was a bit of work towards it but no one has worked on it lately
On Jul 1, 2009, at 4:24 AM, François Delawarde fdelawa...@wirelessmundi.co
m wrote:
Is there any work planned for T.38 termination (in mod_fax)?
François.
On Tue, 2009-06-30 at 12:07 -0400, Michael Jerris wrote:
We
How much memory is it using? Can you use memstat to see where the
memory is allocated.
Mike
On Jul 1, 2009, at 8:29 AM, Muhammad Danish Moosa
danishmo...@gmail.com wrote:
Hi
Freeswitch is being used in a scenario where two endpoints are
running traffic with bypass media mode.
You also have a jira http://jira.freeswitch.org/browse/MODAPP-298, It
looks like you're using lua sql and the backtrace you attached to the
jira was cut off right before the data I needed to see... can you
follow up on that ASAP?
It looks like a crash in libmysql from the last line but
Hello,
I'm trying to implement this kind of logic in the dialplan
if the channel variable sip_refer_to matches regexp
than do action
else if sip_refer_to exists (not NULL) but does not match regexp
than do anti-action
else if sip_refer_to does not exist as a channel_variable (NULL ??)
than do
is PCMA enabled in X-Lite, too?
On Wed, Jul 1, 2009 at 9:25 PM, qian ma god.nirv...@gmail.com wrote:
inbound_codec_negotiation is generous
and the xlite PCMU is enabled.
my var.xml.conf:
X-PRE-PROCESS cmd=set data=global_codec_prefs=PCMA/
X-PRE-PROCESS cmd=set
bkw,
you said Downgrading. I suspect its an issue with your lua sql module
not linking to the thread safe client. in the Jira ticket. I'm
curious how one would go about doing this. I use luasql (the default
ubuntu apt-get install) and have a similar memory problem. I suppose I
would need to
Hi Ray,
This was a problem some time ago (couple of months ago). Are you running the
latest build?
Chris.
-Original Message-
From: freeswitch-users-boun...@lists.freeswitch.org
[mailto:freeswitch-users-boun...@lists.freeswitch.org] On Behalf Of Raymond
Chandler
Sent: Wednesday,
it will match ^$ if the var isnt defined
Math
On 1-Jul-09, at 12:25 PM, Cavalera Claudio Luigi wrote:
Hello,
I'm trying to implement this kind of logic in the dialplan
if the channel variable sip_refer_to matches regexp
than do action
else if sip_refer_to exists (not NULL) but does not
Jason,
Thanks for the reply. I tried the commands as suggested:
freeswi...@internal originate user/mythical...@weavver.com 3000
-ERR SUBSCRIBER_ABSENT
2009-07-01 09:43:16 [ERR] switch_xml.c:1555 switch_xml_locate() Error[[error
near line 1]: root tag missing]
freeswi...@internal 2009-07-01
On Wed, Jul 1, 2009 at 10:04 AM, mitcheloc mitche...@gmail.com wrote:
Jason,
Thanks for the reply. I tried the commands as suggested:
freeswi...@internal originate user/mythical...@weavver.com 3000
-ERR SUBSCRIBER_ABSENT
I suspect the following line is a clue:
2009-07-01 09:43:16 [ERR]
Hi Brian
My customer is now using lua odbc ( not lua mysql anymore) and problem
mentioned in jira is resolved now.
*
http://www.mail-archive.com/freeswitch-...@lists.freeswitch.org/msg01352.html
*
*
*This seems to answer my question, rite?
BTW , starting FS with following
ulimit -c unlimited
If the problem is resolved please follow up on the jira.
/b
On Jul 1, 2009, at 12:42 PM, Muhammad Danish Moosa wrote:
My customer is now using lua odbc ( not lua mysql anymore) and
problem mentioned in jira is resolved now.
___
Freeswitch-users
Thats bull... I just did PCMA all morning testing! Your config is
wrong.
/b
On Jul 1, 2009, at 1:33 PM, qian ma wrote:
yes,PCMA enabled in x-lite.
doesn't work.
FS accept PCMU only.
___
Freeswitch-users mailing list
hi all,
I am working with release Pre9, I have a problem now with say module, the
sound_prefix var is changed to SWITCH_GLOBAL_dirs.base_dir/sounds/es for
default_language to 'es'.
I checked c code on switch_ivr_say the value of sound_prefix is changed always
Diego
I'm ONLY use PCMA, so I would agree with Brian
-Original Message-
From: freeswitch-users-boun...@lists.freeswitch.org
[mailto:freeswitch-users-boun...@lists.freeswitch.org] On Behalf Of
Brian West
Sent: 01 July 2009 20:35
To: freeswitch-users@lists.freeswitch.org
Subject: Re:
I'm sorry about my response... I had overlooked that I only did one
30ms implementation in mod_g723_1.c, Anthony added some more to the
list so it might actually work correctly.
Thanks,
Brian
On Jul 1, 2009, at 4:04 PM, Muhammad Shahzad wrote:
Hi,
I am using FS svn revision 14046 and
did you put them in that spot? the say app needs them to be in that spot.
On Wed, Jul 1, 2009 at 4:10 PM, Diego Toro dft...@yahoo.com wrote:
Hello, the problem is that sound_prefix value is ignored and it's changed
to SWITCH_GLOBAL_dirs.base_dir/sounds/language (with language=en), so audio
The audio files are for instance on ...us/callie/digits/8000, but the last
1.0.4 pre9 version has changed, it ignores the var sound_prefix setting to
SWITCH_GLOBAL_dirs.base_dir/sounds/en the path to audio files.
That change is on the switch_ivr_say function
Diego.
--- On Wed, 7/1/09,
try
apiExecute(uuid_media, off + session.uuid);
On Wed, Jul 1, 2009 at 3:22 PM, Phillip Jones pjinthe...@gmail.com wrote:
Hi there,
I was wondering whether it is possible to have FreeSwitch go into
bypass_media mode on demand?
For instance, leg a bridges to leg b - leg b is invited to
On Fri, Mar 20, 2009 at 7:46 PM, Steve Underwood ste...@coppice.org wrote:
Gabriel Kuri wrote:
once the FAX tone is detected on the PSTN side, FS receives a T.38
re-INVITE from the provider and FS sends back a 488/Not Acceptable
(proxy_media=false). at that point the provider than attempts
Hello all!
There's been some discussion lately on how to handle multiple languages,
specifically with the *say* application. We would like some input from the
community on how to handle multiple languages and sound files. Anthony notes
that the say application needs to build the path to the sound
Another question, Where does FS keep these information??
In *.db or somewhere??
___
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
Are you looking for something more than what sofia status at the CLI
shows?
-MC
On Wed, Jul 1, 2009 at 6:05 PM, Brad Tuan brad.t...@gmail.com wrote:
Another question, Where does FS keep these information??
In *.db or somewhere??
___
Brad Tuan brad.t...@gmail.com wrote:
Another question, Where does FS keep these information??
In *.db or somewhere??
It's a hash table in memory. See sofia_reg_find_gateway__ in sofia_reg.c for
the code that performs the hash table lookup and returns a pointer to the
structure with all of the
Hello,
I'm working on configuring my FreeSWITCH and would like to set the caller id
number like this in dialplan/default.xml:
action application=set data=effective_caller_id_name=John Doe/
action application=set data=effective_caller_id_number=
john...@weavver.com/
I wonder if this is a problem
Mitchel Constantin mythical...@weavver.com wrote:
I'm working on configuring my FreeSWITCH and would like to set the caller id
number like this in dialplan/default.xml:
action application=set data=effective_caller_id_name=John Doe/
action application=set data=effective_caller_id_number=
57 matches
Mail list logo
