that
could not be overwritten (e.g., \libs\pthreads-w32--2-7-0-release) that were
flagged as problems - do I just ignore these warnings or unprotect and/or
delete the directories before rebuilding ?
regards
Dave
- Original Message -
From: Michael Jerris
To: freeswitch-users
to adjust in the SPA3102 setup
http://wiki.freeswitch.org/wiki/SPA3102_FreeSwitch_HowTo
regards
Dave
- Original Message -
From: ovvenkat
To: freeswitch-users@lists.freeswitch.org
Sent: Tuesday, December 15, 2009 1:36 PM
Subject: [Freeswitch-users] hardware requirement to run voip
Jeff,
thanks very much for picking this up. You quickly spotted my mistake - I had
the bind_meta_data call in the local extensions but not added it to the
group extension (100).
Appreciate you taking the time to have a look and point out my silly
mistake - all working now,
regards
Dave
it is the a leg or b
leg that's requesting the transfer ?
regards
Dave
FreeSwitch Version 1.0.4 (14460)___
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http
are correct for this
scenario - which they appear to be based on your previous reply to my query.
So, is there anything else that I can check to see why this is not working ?
regards
Dave
- Original Message -
From: Michael Jerris
To: freeswitch-users@lists.freeswitch.org
Sent
on 111 and requested transfer to 1001 with no success
regards
Dave
- Original Message -
From: Dave Stevenson
To: freeswitch-users@lists.freeswitch.org
Sent: Tuesday, November 24, 2009 10:36 PM
Subject: Re: [Freeswitch-users] Call Transfer Help Please
Hi Mike,
thanks
.
That was where the extra characters were coming from.
Setting this option to No, makes the ATA behave more as expected,
Regards
Dave
- Original Message -
From: Dave Stevenson steve...@primrosebank.net
To: freeswitch-users@lists.freeswitch.org
Sent: Saturday, November 21, 2009 1:20 AM
Hi,
I have just purchased an ATA (Pluscom SIP VoIP ATA, model VPA-11) to try to use
a normal (analogue) cordless phone with FreeSwitch.
I have got the ATA setup and talking to FreeSwitch, it has registered the right
extension and can receive and pick-up incoming calls.
However, I can't dial
have entered a blank dialplan in the ATA which should let all numbers be
processed.
FreeSwitch just won't play ball though !
Regards
Dave
- Original Message -
From: russell.mosem...@cune.org
To: freeswitch-users@lists.freeswitch.org
Sent: Friday, November 20, 2009 10:38 PM
Subject: Re
Hi,
Can someone please help me understand a little more about Group configuration ?
I believe that Group Membership is configured in the
\conf\directory\default.xml file
I've done this and the caller groups seem to work fine.
However, each extension in the \conf\directory\default directory,
want all of my machines to rely on getting
their IP address from another PC - it feels like having DHCP in the router
is more robust.
Regards
Dave
- Original Message -
From: Metik freeswitch-users-l...@metik.com
To: freeswitch-users@lists.freeswitch.org
Sent: Thursday, November 19
was an error - I got in right
in the body of the original post, but not when I edited the subject line -
ps - sorry.
The phone is a 7940 !
regards
Dave
- Original Message -
From: Karl J. Vesterling k...@ken-ton.com
To: freeswitch-users@lists.freeswitch.org
Sent: Thursday, November
Thanks Michael,
I think I've got it !
regards
Dave
- Original Message -
From: Michael Collins
To: freeswitch-users@lists.freeswitch.org
Sent: Thursday, November 19, 2009 8:25 PM
Subject: Re: [Freeswitch-users] Extension Configuration - XML File Entriesfor
Group
so that each phone shows the message
waiting indication ?
Regards
Dave
___
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org
Thanks Joseph,
that would be one way, but it would mean that everyone had a common mailbox
for all calls, I just wanted to do it for calls coming in on the PSTN line.
Maybe that's not possible though ?
regards
Dave
- Original Message -
From: Joseph L. Casale jcas...@activenetwerx.com
not, the Cisco phone downloads the sound file from the TFTP
server everytime you change the ringtone from one of the default ones so the
TFTP server needs to be on all the time so running it on the FreeSwitch
machine is ideal for me,
regards
Dave
- Original Message -
From: Jeff Lenk jl
Hi,
I have just about got FreeSwitch working with a Cisco 7940 Phone. After much
reading, I worked out that I needed a TFTP server on the network that would
supply the phone with it's SIP personality and config etc. I have been able to
get the phone working and realise that the TFTP server
Thanks for the pointers - I'll head off there now..
regards
Dave
- Original Message -
From: Fred-145 codecompl...@free.fr
To: freeswitch-users@lists.freeswitch.org
Sent: Thursday, November 12, 2009 12:59 PM
Subject: Re: [Freeswitch-users] SPA3102 Won't drop the PSTN line (UK
I'm close to getting my SPA3102 working - he says hopefully .. . . .
Making and receiving calls seems to be OK, but the SAP3102 doesn't seem to want
to let go of the phone line once it's got it.
Example
I can receive a call, nobody answers and it goes to voicemail - working so far.
FreeSwitch
(...) for {...}
Being unfamiliar with the FreeSwitch dialplans, I'd NEVER have found the
problem without help,
regards
Dave
- Original Message -
From: Milena
To: freeswitch-users@lists.freeswitch.org
Sent: Monday, November 09, 2009 1:30 PM
Subject: Re: [Freeswitch-users] Valid Dial
Hi,
has anyone any good results to share with using cordless phones for VOIP with
FreeSwitch ?
I have seen a few around that appear to operate with wireless networks and make
SIP connections to VOIP PBXs.
I have seen various models from Engenius, Prestige, DORO and Siemens as well as
Snom.
Joao,
thanks for the note. The Snom M3 is one of the ones that I was looking at - I
would be interested in the Pro's Cons ?
Interesting about the HD, but do you notice the difference and find that you're
disappointed with the quality of their sounds ?
regards
Dave
- Original Message
-free VOIP phone
regards
Dave
- Original Message -
From: Brian West
To: freeswitch-users@lists.freeswitch.org
Sent: Monday, November 09, 2009 8:05 PM
Subject: Re: [Freeswitch-users] Cordless VOIP Phones
On Nov 9, 2009, at 1:38 PM, Dave Stevenson wrote:
Joao
I **think** that the following will match any three character strings from 1xx
to 399
I want to exclude 100 though, can anyone help me with the required RegEx please
?
^([1-3][0-9][0-9])$
I could (I think) do
^([1-3][1-9][0-9]|[2-3][0-9][0-9])$
But it does not feel elegant - is there a
normally write their code, i.e., the extension
processing is position dependant in the file ?
regards
Dave
- Original Message -
From: Stephen Crosby
To: freeswitch-users@lists.freeswitch.org
Sent: Monday, November 09, 2009 8:37 PM
Subject: Re: [Freeswitch-users] RegEx Help
Would
Thanks Michael,
but I want to exclude 100 ?
regards
Dave
- Original Message -
From: Michael Collins
To: freeswitch-users@lists.freeswitch.org
Sent: Monday, November 09, 2009 8:38 PM
Subject: Re: [Freeswitch-users] RegEx Help
On Mon, Nov 9, 2009 at 12:22 PM, Dave
Hi Rupa,
thanks for the tip. I've had a look for the A580-PI - as you say, quite
inexpensive and probably worth taking a chance on one.
regards
Dave
- Original Message -
From: Rupa Schomaker r...@rupa.com
To: freeswitch-users@lists.freeswitch.org
Sent: Monday, November 09, 2009 8:23
Hi Frank
Yup ! That's what I mean :-)
thanks a lot,
regards
Dave
- Original Message -
From: Frank Carmickle fr...@carmickle.com
To: freeswitch-users@lists.freeswitch.org
Sent: Monday, November 09, 2009 9:03 PM
Subject: Re: [Freeswitch-users] RegEx Help
On Mon, Nov 09, Michael
please ?
Where am i going wrong ?
regards
Dave
___
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch
Thanks - pretty unambiguous reply !
I won't go down that route then :-)
- Original Message -
From: Joseph L. Casale jcas...@activenetwerx.com
To: freeswitch-users@lists.freeswitch.org
Sent: Monday, November 09, 2009 10:46 PM
Subject: Re: [Freeswitch-users] Cordless VOIP Phones
The
Well,
I thought it was fixed - it is more or less working, with one more stumbling
block.
I have just posted a dump to the pastebin - from Dave (stevendt)
The voice mail works - but too well.
If the call is answered by a someone at this end - everything is fine until the
user hangs up
for the default extensions (in the wrong order though obviously),
without understanding what they were there for !
I've just stumbled across the Wiki page
http://wiki.freeswitch.org/wiki/Extension_Status_Example - hopefully, I
understand now
regards
Dave
- Original Message -
From
.
I have posted a dump to the pastebin, hopefully, the messages in there will
allow someone to see what the problem is and give me some pointers on how I
might fix it
regards
Dave
- Original Message -
From: Michael S Collins m...@freeswitch.org
To: freeswitch-users@lists.freeswitch.org
version of FS, if I then install one of the SVNs over it,
it will keep all configuration etc. in tact, i.e., I won't lose anything that
I've changed in the conf files etc?
Regards
Dave
- Original Message -
From: Carlos Talbot
To: freeswitch-users@lists.freeswitch.org
Sent
already ?
Regards
Dave
___
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
as the message - or am I just being too
hopeful ?
Regards
Dave
- Original Message -
From: Michael Collins
To: freeswitch-users@lists.freeswitch.org
Sent: Wednesday, November 04, 2009 6:23 PM
Subject: Re: [Freeswitch-users] Gateway Error
On Wed, Nov 4, 2009 at 10:03 AM, Dave
Phew !
Thanks Mike, I was very worried there.
Now, if I just knew which were the broken defaults, I'd know where to go next
:-)
Regards
Dave
- Original Message -
From: Michael Jerris
To: freeswitch-users@lists.freeswitch.org
Sent: Wednesday, November 04, 2009 7:36 PM
that looks like it will tell me everything
else that I need to know on the SPA-3012,
thanks and best regards
Dave
- Original Message -
From: Kristian Kielhofner kristian.kielhof...@gmail.com
To: freeswitch-users@lists.freeswitch.org
Sent: Wednesday, November 04, 2009 8:57 PM
Subject: Re
line 3379]: missing ]
I'm pretty sure the error must be in the 00_spa3102.xml file, but I can't
see where the error might be - it looks identical to that on the Wiki page ?
regards
Dave
___
FreeSWITCH-users mailing list
FreeSWITCH-users
Hi,
I have read the Docs on the Wiki
(http://wiki.freeswitch.org/wiki/Installation_Guide#Precompiled_Binaries) but
am still not sure of what the different Windows install files are. Currently,
the Windows Installer directory contains :-
LATEST_SVN_15106 - 6 Bytes
freeswitch-1.0.4.exe - 42
,am I right in thinking that I should proceed with running
the FreePBX install from the WAMPServer menu ?
regards
Dave
- Original Message -
From: Jeff Lenk jl...@frontiernet.net
To: freeswitch-users@lists.freeswitch.org
Sent: Tuesday, November 03, 2009 2:48 PM
Subject: Re: [Freeswitch
Help please . . . .
Is anyone using the 3Com 3102 (3C10402B) Phone with FreeSwitch ?
I have got FreeSwitch up and running with the SoftPhone, but can't get a 3Com
hardware phone to talk to FreeSwitch. I have the phone getting its IP Address
from DHCP and it can see the FreeSwitch server but I
on.
Hopefully, I'll be there soon,
regards
Dave
- Original Message -
From: Rupa Schomaker r...@rupa.com
To: freeswitch-users@lists.freeswitch.org
Sent: Tuesday, November 03, 2009 9:19 PM
Subject: Re: [Freeswitch-users] IP Phones with FreeSwitch
These phones work with FS, come by irc
.
Oh well, off to try and find some open SIP phones that will actually work for
me,
regards
Dave
- Original Message -
From: Chris Chen
To: freeswitch-users@lists.freeswitch.org
Sent: Tuesday, November 03, 2009 8:18 PM
Subject: Re: [Freeswitch-users] 3Com 3102 (3C10402B) Phone
, but
please let me know how you've made it work
regards
Dave
- Original Message -
From: Tihomir Culjaga
To: freeswitch-users@lists.freeswitch.org
Sent: Tuesday, November 03, 2009 7:53 PM
Subject: Re: [Freeswitch-users] 3Com 3102 (3C10402B) Phone with FreeSwitch
you might
Thanks a lot - to both William and Shelby,
that makes me more confident about trying out at least one Cisco and Rupa
has just given me a few more options, so, hopefully, I won't make the 3Com
mistake again !
regards
Dave
- Original Message -
From: William Suffill william.suff
Hi again,
sorry to be here again !
OK, now that I know that 3Com phones and FreeSwitch don't mix, my next question
is about Cisco !
I see that the FreeSwitch Interoperability list includes Cisco phones such as
the 7940 and 7960.
I believe that these phones need user licenses to work with
Hi,
I am new to FreeSwitch - and VOIP too (as the following questions will
indicate).
I am trying to setup a VOIP system at home and am just getting started, I have
been trawling through the Docs/Wiki and realise that I have a lot to learn !
Anyway, here's the first (of what I'm sure will
can change the IP address to fixed and don't need to
make any changes at the Server end - just need to update the Clients.
regards
Dave
- Original Message -
From: Shelby Ramsey sicfsl...@gmail.com
To: freeswitch-users@lists.freeswitch.org
Sent: Saturday, October 31, 2009 6:13 PM
Subject
on http://wiki.freeswitch.org/wiki/Main_Page to IRC Chat
(irc://irc.freenode.net/freeswitch) appears to be an invalid link)
regards
Dave
- Original Message -
From: Shelby Ramsey sicfsl...@gmail.com
To: freeswitch-users@lists.freeswitch.org
Sent: Saturday, October 31, 2009 7:07 PM
Hello all,
Help a n00b out.I have been trying to get an instance of FreeSwitch
running up in the Amazon EC2 cloud.
I have successfully gotten the package built following the wiki and archives
of this list.
I can get x-lite to register with the switch and it will set up calls
I like to try out the freeswitch in real life call, but besides the
connection through the asterisk, it seems that it has no way to directly
support by VOIP service provider.
I am sure some of the VOIP service provider do see the potential business
in this area, but not sure why we still
I got the compile error on windows XP pro (with VS 2005).
..\..\src\switch_xml.c(2234) : error C2220: warning treated as error -
no 'object' file generated ..\..\src\switch_xml.c(2234) : warning
C4267: '=' : conversion from 'size_t' to 'int', possible loss of data
..\..\src\switch_xml.c(2266)
to know if there is anyway to keep the same VSP, but switch from
asterisk to freeswitch, if can, is there a how to guide, if can not
with vbuzzer, is there any VSP who claim the support of the FS.
Thanks in advance.
Dave
___
Sent
54 matches
Mail list logo