I'm running the Slackware 9.1 with the newest kernel 2.6.5 (i think) and
when I run the install script I receieve the following message:
/home/nussy/.freevo/freevo.conf is missing, running 'freevo setup'
Inconsistency detected by ld.so: rtld.c: 1175: dl_main: Assertion
I am new to this list and I would like to know Is it
possible to save the playlist in Freevo if so how can
it be done [any changes to conf file] also how to
delete files.
Regards,
Sanjay Kumar J
__
Do you Yahoo!?
Yahoo! Photos:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Folks,
I'm going nuts. I don't have the luxury of a card that supports btaudio. I
have a AverMedia fm98 (yay).
My soundcard is a Sound Blaster Live (original). I have the soundcard
connected to the tv via the patch cable we all know and
Excerpts (reformatted) from Zeratul's mail of 27 Jan 2004 (EST):
I have freevo running on a G400 Max, and was wondering ...
Why would you want to use directfb or dfbmga ? (just curious)
Does it give you better performance or features than -vo mga ?
I dunno. I was using directfb because that
-
From: William Morgan [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, January 26, 2004 11:32 PM
Subject: Re: [Freevo-users] help with matrox g400 and directfb?
Excerpts (reformatted) from William Morgan's mail of 26 Jan 2004 (EST):
Ah, thanks for the hint! I gave up on the CVS
Hi all,
I'm trying to get my g400 to do TV out with directfb. When I run
mplayer with -vo dfgbmga, I get the following output:
-- DirectFB v0.9.21 -
(c) 2000-2002 convergence integrated media GmbH
(c) 2002-2003
: William Morgan [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, January 26, 2004 3:21 PM
Subject: [Freevo-users] help with matrox g400 and directfb?
Hi all,
I'm trying to get my g400 to do TV out with directfb. When I run
mplayer with -vo dfgbmga, I get the following output
Excerpts (reformatted) from Youri van Gorselen's mail of 26 Jan 2004
(EST):
I think u have CONFIG_MATROX_MAVEN in your kernel compiled. Remove it
and
that error is gone :)
Well, I had tried that previously, and this is what I got (I actually have
it
as a module at this point):
(*)
.
- Original Message -
From: "William Morgan" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, January 26, 2004 3:21 PM
Subject: [Freevo-users] help with matrox g400 and directfb?
Hi all,
I'm trying to get my g400 to do TV out with directfb. When I run
mplayer with -vo
Excerpts (reformatted) from Youri van Gorselen's mail of 26 Jan 2004 (EST):
There are definitely weird interactions with the Debian provision of
/usr/include/linux (from the linux-kernel-headers package) and
DirectFB 0.9.20, but even if I manually point /usr/include/linux and
Excerpts (reformatted) from William Morgan's mail of 26 Jan 2004 (EST):
Ah, thanks for the hint! I gave up on the CVS version and got DirectFB
0.9.20 to work, but it was difficult. I had to
Incidentally, the directfb guys just provided a patch for getting
MPlayer-1.0pre3 to work with CVS
: Monday, January 26, 2004 11:32 PM
Subject: Re: [Freevo-users] help with matrox g400 and directfb?
Excerpts (reformatted) from William Morgan's mail of 26 Jan 2004 (EST):
Ah, thanks for the hint! I gave up on the CVS version and got DirectFB
0.9.20 to work, but it was difficult. I had
When i activate the plugin freevo writes this to
the logfile:
failed to load plugin plugin.tiny_osdstart
'freevo plugins -l' to get a list of pluginsTraceback (most recent call
last): File "/usr/lib/python2.2/site-packages/freevo/plugin.py", line
473, in __load_plugin__ p = eval(object)()
last night it happend again, at 21.44 the main freevo thread died, from
then on it no longer updated the LCD screen, the TV screen or wrote
anything to the main log.
No one was in the house and nothing is showing in the system logs, no
recordings were scheduled. Looks like it died without any
Carson wrote:
There does not appear to be a XMLTV grabber for Australia, so cannot get
that going.
http://www.onlinetractorparts.com.au/rohbags/
The results are a bit weird with programmes that run through
midnight -- the data source splits most of them into two and
the script doesn't try to
Matt McLeod wrote:
Carson wrote:
There does not appear to be a XMLTV grabber for Australia, so cannot get
that going.
http://www.onlinetractorparts.com.au/rohbags/
The results are a bit weird with programmes that run through
midnight -- the data source splits most of them into two and
the
Robert Winder wrote:
Saturday, December 6, 2003, 6:00:59 AM, Murray wrote:
/usr/X11R6/bin/xinit /root/freevo.start -- /usr/X11R6/bin/X -xf86config
/etc/X11/XF86Config bc -screen NVTVOUT vt8
/root/freevo.stop
try it with bc -s off -dpms. Works for me.
Works for me too! Thanks!
and
Saturday, December 6, 2003, 6:00:59 AM, Murray wrote:
On boot my lounge room [pc boots up Freevo, but screen blanking comes on
after 20 mins or so... i start freevo as follows:
/usr/X11R6/bin/xinit /root/freevo.start -- /usr/X11R6/bin/X -xf86config
/etc/X11/XF86Config bc -screen NVTVOUT
On boot my lounge room [pc boots up Freevo, but screen blanking comes on
after 20 mins or so... i start freevo as follows:
/usr/X11R6/bin/xinit /root/freevo.start -- /usr/X11R6/bin/X -xf86config
/etc/X11/XF86Config bc -screen NVTVOUT vt8
/root/freevo.stop
where freevo.start contains:
#!/bin/sh
hello:
Tat this type of question does not have to go in this list of mail but that
they have
experience with this type of hardware
As I can form gamepad of 8 bellboys in linux? in kernel 2,2 tapeworm
problems
for this .I have debian sid (kernel 2.4.22) and es1371 that module cant load
?? for
splashing water to put out flames :(
keir johnson wrote:
I actually tried using 1.3.4, but it doesn't execute
properly---hangs, so I had to install only other version I had
downloaded which was 1.3.2.
Dischi wrote:
One common problem. 'It hangs' doesn't help much. If I don't know
what happens,
Hi,
I take this posting as a mail I want to write for a long time
now. It's not personally :-)
keir johnson wrote:
I actually tried using 1.3.4, but it doesn't execute
properly---hangs, so I had to install only other version I had
downloaded which was 1.3.2.
One common problem. 'It hangs'
Hi,
Am Mo, 2003-09-22 um 19.11 schrieb Robert Winder:
o I developed a way to detect if a disc is a DVD, VCD or SVCD. I send
a mail: please test and send results. I only got 1 (!!!)
answer. Lucky for you all, this answer helped to solve a bad bug.
Hmm keep in mind that testing new
In my local_conf.py file, I have the following line:
MPLAYER_ARGS_DEF = ('-fs -idx -quiet -af volume=-10:s -display :0 -x 800 -y
600')
MPLAYER_ARGS = { 'dvd': '-cache 8192',
'vcd': '-cache 4096',
'cd' : '-cache 500 -cdda speed=1',
'tv' :
Anyway to use the freevo.conf to use the mencoder in the runtime dir but
use the mplayer that I built myself.
---
This SF.net email is sponsored by Dice.com.
Did you know that Dice has over 25,000 tech jobs available today? From
careers in IT
hey rob
thanks for trying but im still 'freevo-less' :(
i changed display in freevo.conf to x11, and exported SDL_VIDEODRIVER,
[EMAIL PROTECTED] freevo-1.3.2]# set | grep SDL
SDL_VIDEODRIVER=x11
[EMAIL PROTECTED] freevo-1.3.2]# ./freevo
Logging info in /var/log/freevo/internal-main-0.log
You are running this from inside of X right? Is it a local display?
Can you run other X apps from the same prompt, like xclock?
Pygame is the basis for Freevo, not the games plugin or anything like
that. It is basicly the python interface to libSDL, which lets us
display stuff to the screen.
thanks rob!
i feel pretty dumb - it was the display variable (i was trying from ssh
login).
i couldnt pass --display=localhost:0.0 or -display=localhost:0.0, which
would be nice (like other x apps)
but i could export DISPLAY=localhost:0.0 and it runs! (well missing fonts
but easily fixed)
i
i posted a message a few days ago but alas, no help yet :(
..im sure someone else has had this problem before, yes? (anyone?)
heres the error:
[EMAIL PROTECTED] freevo-1.3.2]# ./freevo
Logging info in /var/log/freevo/internal-main-0.log
Do you have SDL_VIDEODRIVER exported as something wierd?
Try export SDL_VIDEODRIVER=x11 then start freevo. Also you should
change display in freevo.conf to be x11 not xv because using x11 tells
mplayer to try xv first now.
-Rob
Roh . wrote:
i posted a message a few days ago but alas, no help
O.K. I have everything working for my freevo box. It all runs perfectly
with my monitor, boots directory in to freevo etc. I am using the
insturction for booting in to x with redhat 8.0 in wiki. The problems start
happening though when I move my box over to the tv. Every thing goes fine
until
101 - 131 of 131 matches
Mail list logo
