to enable NTSC output.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Rob Shortt
Sent: Tuesday, January 13, 2004 11:56 AM
To: [EMAIL PROTECTED]
Subject: Re: [Freevo-users] dxr3 and libSDL
Gray, Tim wrote:
yup. I simply set the dxr3 driver for NTSC and ignore
the TV is
incapable of showing that level of detail. Unless you are showing a low res
picture at high res scaled down again for the TV.
- Original Message -
From: Barnowl [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, January 17, 2004 11:26 PM
Subject: Re: [Freevo-users] dxr3
Looks like I have a project to play with this weekend.
Evan
n Fri, 16 Jan 2004 12:17:09 -0400
Rob Shortt [EMAIL PROTECTED] wrote:
For everyone, this is an important read: http://scanline.ca/overscan/
Mark Benson wrote:
If you are going to use overscan, then the interface should be
it works, except that the freevo GUI is overscanning too far.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Barnowl
Sent: Tuesday, January 13, 2004 11:54 PM
To: [EMAIL PROTECTED]
Subject: Re: [Freevo-users] dxr3 and libSDL
Tim-
Have you got Xine
: RE: [Freevo-users] dxr3 and libSDL
yes I have, and I also need to make the GUI image smaller somehow.
overscan settings will not take negative numbers so those are useless (I
want a -20 setting!)
I am using the runtime + 1.4 (1.4.1 has a bug that will not let it run
outside the home
For everyone, this is an important read: http://scanline.ca/overscan/
Mark Benson wrote:
If you are going to use overscan, then the interface should be designed to
take into account the TV Safe area.
Freevo does take into account the safe action area and overscan area
(referring to the area
To: [EMAIL PROTECTED]
Subject: Re: [Freevo-users] dxr3 and libSDL
For everyone, this is an important read: http://scanline.ca/overscan/
Mark Benson wrote:
If you are going to use overscan, then the interface should be designed to
take into account the TV Safe area.
Freevo does take into account
13, 2004 11:56 AM
To: [EMAIL PROTECTED]
Subject: Re: [Freevo-users] dxr3 and libSDL
Gray, Tim wrote:
yup. I simply set the dxr3 driver for NTSC and ignore everything in the
patch.
it works fine even with the PAL stuff in the patch.
That's good to hear. Last night I did some work
Gray, Tim wrote:
yup. I simply set the dxr3 driver for NTSC and ignore everything in the
patch.
it works fine even with the PAL stuff in the patch.
That's good to hear. Last night I did some work porting the patch to
SDL12 cvs and last ffmpeg release (0.4.8). I had to change a few things
to
yup. I simply set the dxr3 driver for NTSC and ignore everything in the
patch.
it works fine even with the PAL stuff in the patch.
-Original Message-
From: Rob Shortt [mailto:[EMAIL PROTECTED]
Sent: Tuesday, January 13, 2004 11:46 AM
To: [EMAIL PROTECTED]
Subject: [Freevo-users] dxr3
I sure can, the freevo machine I have that on is at home so I'll email you
with that info ASAP.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Rob Shortt
Sent: Tuesday, January 13, 2004 11:56 AM
To: [EMAIL PROTECTED]
Subject: Re: [Freevo-users] dxr3
11 matches
Mail list logo