This is not an uncommon fault with Pismos. It is the 'wedding line'
where the plastic joins up again after flowing around the trackpad
and the clicker, during the molding.
If you can put up with it, do so. It is very unlikely to go any
further or to break, short of a severe drop.
Trying t
Hello. I wander about in LEM with a wallstreet I and a blue chip
powerlogix g4 upgrade.
I have only 2 meg video ram. I obtain wallstreet II bottom and a
wallstreet II processor. I load os 9.2.1 on the hard drive (spare
that has no os on it) and with the wallstreet II processor it boots
up and a
Hello. I wander about in LEM with a wallstreet I and a blue chip
powerlogix g4 upgrade.
I have only 2 meg video ram. I obtain wallstreet II bottom and a
wallstreet II processor. I load os 9.2.1 on the hard drive (spare that
has no os on it) and with the wallstreet II processor it boots up and
a
on 06/11/05 02:20, kaldav at [EMAIL PROTECTED] wrote:
[snip!]
> 3. The bottom case is separated near the trackpad and down to the
> bottom edge. It looks like this is the join line of the plastic as it
> is a straight line, rather than any jagged edge. Do people open the
> case and try to glue or t
on 06/11/05 02:08, kaldav at [EMAIL PROTECTED] wrote:
> Hello,
> I have recently acquired a 500 mhz Pismo running 10.4.2 and would
> appreciate members' opinions on the following:
> 1. Memory- installed are two 128 mb ram cards for a total of 256 mb ram.
> I have an additional 256 mb LP PC100 32x6
Hello,
I have recently acquired a 500 mhz Pismo running 10.4.2 and would
appreciate members' opinions on the following:
2. The screen- When started the screen is suffused with a red color,
whether starting in Tiger or OS9.22. Then the red fades and the
screen takes on the usual display and beha
So it seems that enough of us have had success with
ATA6 large capacity drives from various manufacturers.
Seems to me that problems are spurious (the list
member's experience during exhaustive tests
notwithstanding - is testing hardware your job?) and
therefore possibly due to manufactuering defe
On Nov 5, 2005, at 11:20 PM, kaldav wrote:
I have recently acquired a 500 mhz Pismo running 10.4.2 and would
appreciate members' opinions on the following:
4. It came with a Belkin 54g F5D7010, 802.11g Wireless Notebook
Network PCMCIA Card, but when I insert it there is no indication
that
