On Jan 29, 2004, at 8:28 AM, Beniamino Cenci Goga wrote:
There's a good chance the failure is in the serial transceiver. as
this is the part that would likely be damaged by external electrical
overload. Take the computer apart and use an oscilloscope to see if
signals are making is across the t
I hope this is the right list... and according to instructions it
is, although the PB G3 kanga is a vintage thing!
BTW. The serial port of my old Kanga no longer works. TechTool in
not very useful in telleing me if it is a software related error.
I reinstalled the software and still does not wo
There's a good chance the failure is in the serial transceiver. as
this is the part that would likely be damaged by external electrical
overload. Take the computer apart and use an oscilloscope to see if
signals are making is across the transceiver.
You can replace the serial transceiver if you
On Jan 29, 2004, at 7:04 AM, Beniamino Cenci Goga wrote:
I tried Zterm. On a vintage 5300 ce it says OK anytime I write AT
while in the kanga it says nothing, although it allows me to select
the port...
well I start looking on e-bay for a logic board.
PS: is it difficult to soldier a serial po
There's a good chance the failure is in the serial transceiver. as this
is the part that would likely be damaged by external electrical
overload. Take the computer apart and use an oscilloscope to see if
signals are making is across the transceiver.
You can replace the serial transceiver if you
I tried Zterm. On a vintage 5300 ce it says OK anytime I write AT
while in the kanga it says nothing, although it allows me to select
the port...
well I start looking on e-bay for a logic board.
PS: is it difficult to soldier a serial port along with its fuses
(provided I can get to see the Ap
on 29/01/04 05:00, Beniamino Cenci Goga at [EMAIL PROTECTED] wrote:
> I hope this is the right list... and according to instructions it is,
> although the PB G3 kanga is a vintage thing!
>
> BTW. The serial port of my old Kanga no longer works. TechTool in not
> very useful in telleing me if it i
I hope this is the right list... and according to instructions it is,
although the PB G3 kanga is a vintage thing!
BTW. The serial port of my old Kanga no longer works. TechTool in not
very useful in telleing me if it is a software related error.
I reinstalled the software and still does not wo
