Re: B&W G3

Did you ever get your B&W running again? Did you do a firmware update before putting in the G4 ZIF? The B&W can't use a G4 without it. Of course, if you didn't do that in the first place and you can't start up the machine, now, you're in a real bind. Here are some things to try. G3 If you did

Re: 80GB HD-looks good

--- You wrote: The ones which are NOT good are those which *appear* to be the same as the regular priced drive, but instead only have 2 MB cache (or some other significant alteration). These turned out to be the same HDA (head disk assembly), but the logic board was completely different. A num

Re: 80GB HD-looks good

>It's interesting that 8 meg or 2 meg ram caches seem to perform the same >on my >Beige with an ATA 133 card, according to tests with Hard Disk Speed Tools. >Must be the Beige bus limitations. I'd appreciate any enlightenment on >whether >this is really the case. The Beige is limited to 16.67

Re: G3 AIO Upgrade Suggestions?

James, What OS is receommended for this system? It has 8.1 installed. I have OS 8.5, 9.2.2 and 10.1 available. Are these good choices for the AIO? If not, what would be better? Does any version of OSX run acceptably on these machines provided there is enough memory installed? I think the prope

Re: G3 PCI cards

>PCI slots in the B&W are larger then in the Beige. >How do you call this PCI cards for the B&W? There are 32 and 64 bit PCI cards. A 64 bit card will work in a 32 bit slot (I'm currently using an ATTO dual channel LVD/SE SCSI card in my Beige, and the ATTO is a 64 bit card, removed from a G4,

Need a newer Mac

I am starting to think about getting a newer Mac than my current G3 Beige MiniTower OS 9 (dual HD, CD, ZIP, SCSI Scanner, LaserWriter Pro 630, Cannon s520 InkJet) Of course I could buy one of the new models, an eMac, an iMac, or a G5 but that could be a lot of cash and require a lot of s/w upgr

G3 AIO Upgrade Suggestions?

I was given a 233 MHz G3 AIO. I would like to upgrade it and am looking for suggestions. It had 32 MB of memory when I received it, I have since added 128 MB of memory and am looking for good deals on a 256 MB chip. The added memory helps a lot. I am looking for suggestions and advice for further

KeyQuencer Lite Upgrade?

I want to create standalone KeyQuencer applets, which are supported in the full-featured version of KeyQuencer, but not in KeyQuencer Lite (which I have). The originator, binarysoft.com, has apparently gone under. eBay turns up nothing in a search for 'keyquencer', TUCOWS shows only KeyQuencer Lite

Re: Fink commander error.

On 10/26/03 3:01 AM, "Illovox Media" <[EMAIL PROTECTED]> Spew into the Cybertrough: > on 10/26/03 12:38 AM, Marcelo Maia at [EMAIL PROTECTED] wrote: > >> GGO FUUCCCKK!!! > > Huh? WTH is this guy's issue? Nevermind. He's long gone. -- Kyle H. Ha

Re: G3 PCI cards

On Sunday, October 26, 2003, at 01:15 AM, Franz wrote: Hi all, Could someone explain to me the difference of PCI cards for the Beige and the B&W, I had PCI cards from my 6500, I could use in the Beige, got a offer to buy a B&W 450 mhz, rev 2, I took it home and discovered that the PCI slots in

Re: G3 PCI cards

If they worked in the Beige, they should work in the B&W. Hi all, Could someone explain to me the difference of PCI cards for the Beige and the B&W, I had PCI cards from my 6500, I could use in the Beige, got a offer to buy a B&W 450 mhz, rev 2, I took it home and discovered that the PCI slots

G3 PCI cards

Hi all, Could someone explain to me the difference of PCI cards for the Beige and the B&W, I had PCI cards from my 6500, I could use in the Beige, got a offer to buy a B&W 450 mhz, rev 2, I took it home and discovered that the PCI slots in the B&W are larger then in the Beige. How do you call thi

Re: Fink commander error.

I installed Fink once. Bad experience with it. Was on one of my early X installs, everything where the OS put it and Fink still couldn't find what it needed. If you can figure it out, I'd do what you need without Fink. Anything you can get through Fink commander, you can find on your own elsew

Re: Fink commander error.

on 10/26/03 12:38 AM, Marcelo Maia at [EMAIL PROTECTED] wrote: > GGO FUUCCCKK!!! Huh? WTH is this guy's issue? -- G-List is sponsored by and... Small Dog Electronicshttp://www.smalldog.com | Refurbished Drives | --

Re: Fink commander error.

GGO FUUCCCKK!!! On 10/26/03 0:55, "Leon Sargent" <[EMAIL PROTECTED]> wrote: > I get this error when I try to download using Fink commander. > > The tool that FinkCommander uses to run commands as root does not have > the necessary permissions. >