Re: OT: Linksys WET54G Wireless Bridge

On May 20, 2011, at 9:28 PM, Jonas Ulrich wrote: > Another thing, is that you can click on something, and a lot of the time, it > just won't load. For example, click on Security Settings. It pops up another > window, that just loads, and loads, but never shows up. Try using a different browser..

Re: OT: Linksys WET54G Wireless Bridge

Another thing, is that you can click on something, and a lot of the time, it just won't load. For example, click on Security Settings. It pops up another window, that just loads, and loads, but never shows up. The FirmWare is up to date. Thank you all for your help so far! -Jonas -- You receiv

Re: OT: Linksys WET54G Wireless Bridge

Firmware update is a good idea, I'll check the version. I'm not going to trash it, I'm just not going to use it for this. I honestly think that it is just the configuration software that is the problem, because I have made it work for this purpose before successfully. I will try to describe the pr

Re: OT: Linksys WET54G Wireless Bridge

On Fri, May 20, 2011 at 7:27 PM, Jonas Ulrich wrote: > Any more ideas before I trash this piece of crap Linksys and gets something > that works? I am so frustrated... I guess I would suggest that rather than trashing it you offer it up on the swap list. But without a more detailed understanding a

Re: OT: Linksys WET54G Wireless Bridge

On May 20, 2011, at 6:27 PM, Jonas Ulrich wrote: Any more ideas before I trash this piece of crap Linksys and gets something that works? I am so frustrated... Is the firmware up-to-date? The Cisco site says there are three hardware version 1,2,3, and that the current firmware for each is v

Re: OT: Linksys WET54G Wireless Bridge

Well I settled for my next best solution - though it may turn out to be the best solution yet. I bridged two identical Buffalo routers, and that works great. I just have to add another wireless router in my house, because the Buffalo's are in dedicated bridge mode. -Jonas -- You received this m

Re: OT: Linksys WET54G Wireless Bridge

I have now tried everything that was mentioned. The manual is no help, and the interface for configuring the device is complete crap. I have also tried hooking my computer directly to it, with no luck. I double checked that the wifi password, as well as the encryption type is correct. Any more id

Re: OT: Linksys WET54G Wireless Bridge

On Fri, May 20, 2011 at 9:30 AM, Bruce Johnson wrote: > On May 19, 2011, at 9:52 PM, Jonas Ulrich wrote: >>  I will need to disable the DHCP >> server setting on one of those routers for it to have the possibility of >> working correctly. > > Disable the Netgear's DHCP; leave the Buffalo (which is

Re: OT: Linksys WET54G Wireless Bridge

It might be easier to start out getting the two routers working first - in other words forget the bridge, get them talking properly with wired connections, dhcp working fine etc, then once it's up and running, separating the two routers with the wireless bridge. -- You received this message beca

Re: OT: Linksys WET54G Wireless Bridge

On May 19, 2011, at 9:52 PM, Jonas Ulrich wrote: I will need to disable the DHCP server setting on one of those routers for it to have the possibility of working correctly. Disable the Netgear's DHCP; leave the Buffalo (which is routing to the WAN) as the DHCP server. (or simply replac

Re: OT: Linksys WET54G Wireless Bridge

Thanks for all the replies so far! Here is my setup: Modem > Buffalo Wireless G Router > Wireless WET54 Ethernet Bridge(connected wireless) > NetGear Wired Router > Computer running Leopard. I am able to access both the admin page of the WET54, as well as the NetGear router. I reset both to fact

Re: OT: Linksys WET54G Wireless Bridge

On May 19, 2011, at 7:47 PM, Jonas Ulrich wrote: I'd really appreciate some help on this. There's a link on this page that may help?: -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 de

Re: OT: Linksys WET54G Wireless Bridge

they didn't charge me a few yrs ago. I had it all written down but I left it with my X girlfriend... -Original Message- From: Jonas Ulrich Sent: May 19, 2011 8:47 PM To: g3-5-list Subject: OT: Linksys WET54G Wireless Bridge Does anyone have any experience configuring this thing to co

Re: OT: Linksys WET54G Wireless Bridge

Can you describe the order of what's plugged to what? For example, my setup: Modem > Router > BigAss Hub (16 ports) > Into one port on first floor is a WRT54G. So I have experience daisy chaining. What is your goal? I'm sure we'll have an answer if question is clarified. On May 19, 8:47 pm, Jona

Re: OT: Linksys WET54G Wireless Bridge

Ooops. Was trying to peek at the manual for the Linksys WET54G and it appears one needs to know which version of the hardware you are using, 1, 2, or 3. The hardware version should be next to the model number on the WET54G. http://homesupport.cisco.com/en-us/wireless/lbc/WET54G Would you happen to

Re: OT: Linksys WET54G Wireless Bridge

On Thu, May 19, 2011 at 8:47 PM, Jonas Ulrich wrote: > Does anyone have any experience configuring this thing to connect to a > wireless network, then plug in to wired router? I am banging my head against > the wall trying to get this thing to work. I am not (yet) familiar with either the Linksys

OT: Linksys WET54G Wireless Bridge

Does anyone have any experience configuring this thing to connect to a wireless network, then plug in to wired router? I am banging my head against the wall trying to get this thing to work. I realize this is a little off topic, but I'd really appreciate some help on this. Thanks! -- -Jonas --