assuming you are using Gambas3: File, Open example
--
View this message in context:
http://gambas.8142.n7.nabble.com/How-to-open-new-examples-in-gambas-after-finishing-with-one-tp44200p44212.html
Sent from the gambas-user mailing list archive at Nabble.com.
I see Gambas 3.1.1 has re-appeared (yet again) in the repository of Xubuntu
12.10 which presumably inherits from Ubuntu which presumably inherits from
Debian.
Seems ok. Is this (at long last) a working version?
--
View this message in context:
Hi
Gambas on Puppy has been a saga that has run and run and run.
The paranoid half of me suspects some kind of official disapproval as Puppy
has it's own lobotomised BASIC variant called BaCon.
--
View this message in context:
http://gambas.8142.n7.nabble.com/Puppy-on-Pi-tp40515p40516.html
Mike Crean wrote: I .. had problems using Ubuntu to put the image on the
SD.
I had the same problem. It was due to M$ crud on the SD as bought. Blatted
it with System Rescue and the image installed fine from Xubuntu.
--
View this message in context:
Benoît Minisini wrote
I cannot reproduce any problem, so please give more details : which GTK+
theme you use, which desktop you use, screenshots...
Here is a link to a short video showing the problem. It's short: only 400K
ftp://ftp.drivehq.com/charlesg628/PublicFolder/out.ogv
Hi
I am using a fresh install of Xubuntu 12.10 but it also happens on Lubuntu
12.04.
[System]
OperatingSystem=Linux
Kernel=3.5.0-18-generic
Architecture=i686
Memory=1805260 kB
DistributionVendor=Ubuntu
DistributionRelease=Ubuntu 12.10
Desktop=Xfce
Language=en_GB.UTF-8
[Gambas 3]
Version=3.3.90
Hi
Hi I am not sure that video will get through.
Here are two screenshots done by simply run,close,run,close.
1st_run.png http://gambas.8142.n7.nabble.com/file/n40061/1st_run.png
2nd_run.png http://gambas.8142.n7.nabble.com/file/n40061/2nd_run.png
Each time you run the programme (under GTK
Hi
I have noticed that the effect is not apparent if you close the application
from the IDE.
I can only get the bug by open from IDE, close from application repeated.
rgds
--
View this message in context:
http://gambas.8142.n7.nabble.com/hsplit-layout-settings-under-gtk-tp40036p40062.html
Hi,
The saving of hsplit.layout settings works fine under qt4 but give imprecise
results under gtk. Gambas 3.3.9. various 32bit OS.
tSplitLayout-0.0.1.tar
http://gambas.8142.n7.nabble.com/file/n40036/tSplitLayout-0.0.1.tar
rgds
--
View this message in context:
Hi
Thks for super-quick reply! Gambas 3.3.90
Under GTK only: If I move the hsplit bar and close the file, then the hsplit
is not in the new position when I open the program the next time. It does
respond to the change but not accurately. All this works fine under QT
rgds
--
View this
Here is a revised version of the Barcode example
http://old.nabble.com/file/p34612204/BarcodeGambas3-0.0.4.tar
BarcodeGambas3-0.0.4.tar
Benoît Minisini wrote:
Le 11/08/2012 11:58, charlesg a écrit :
Benoît Minisini wrote:
I don't remember. When?
Your file is unreadable. Please join
Benoît Minisini wrote:
Does anyone know the best places where that article should be submitted?
Muktware is normally an interesting read.
Can I offer any help with translation?
--
View this message in context:
Choperhead wrote:
.. but when I open the project folder there is empty (the form files etc.
not are there)
Many Gambas3 files (including source files) are hidden. In Nautilus (the
file manager) you can display them with ctrl-H.
It might be safer to make a source archive (Project, Make,
Jussi Lahtinen wrote:
See Barcode example for how to send things to printer.
My barcode example only printed from Gambas2. I did submit a Gambas3 version
to the mailing list that did print from Gambas 3 but it never made it into
the source repository.
I see the source version of the
Benoît Minisini wrote:
I don't remember. When?
Your file is unreadable. Please join it to your post as a normal
attachment.
It was a long time ago. Maybe Jun 2011. Search on Mailing list says it has
been deleted. I seem to remember you found fault with something. Perhaps you
expected me
Jussi Lahtinen wrote:
Hints...
((Key[n] Or Key[N]) And Key.Alt)
Here Or and And are bitwise operators.
AAHH! Thanks. I will correct.
--
View this message in context:
http://old.nabble.com/Printer-code-request-tp34282837p34285575.html
Sent from the gambas-user mailing list
Gambas 3.2.1 has appeared in Lubuntu 12.04 repository. Hopefully that means
Ubuntu as well.
--
View this message in context:
http://old.nabble.com/Distribution-availability%3A-it%27s-gets-better%21-tp34223758p34223758.html
Sent from the gambas-user mailing list archive at Nabble.com.
Very nice to see that Mageia 2 has Gambas 3.1.1 in its software repository.
Distrowatch (not that it is definitive) has Mageia as second most popular
over the last three months and ahead of Ubuntu.
--
View this message in context:
Benoît Minisini wrote:
But it works, and it's cool. :-)
I sent Raspberry Pi the screendump and had the following reply from Eben
Upton:
Oh, very cool. We'll try to help you guys jump the queue for some
units when we get the next batch in.
Fingers crossed.
--
View this message in
charlesg wrote:
I have emailed Raspberry Pi to see if they have any development kits.
I have received a very polite reply from Eben Upton telling me to join the
queue!
Thinking about it, I suspect the ex-Director of Computer Science, St John's
College, Cambridge would probably develop
kevinfishburne wrote:
I just tested gb3's memory consumption with the world
generator for my game it it uses about 70 MB of RAM just to load the
project.
Gambas apps may not consume RAM but I seem to remember that Gambas itself
will not compile an app if the m/c does not have 384Mb.
Fabien Bodard-4 wrote:
but how to get one of these machines?
I have emailed Raspberry Pi to see if they have any development kits.
Standing in RS Components or Premier Farnell queue would I fear take
forever.
--
View this message in context:
gambas-4 wrote:
Status: New
New issue 242 by tvijlbr...@gmail.com: Gamba forms fail on Debian ARM
It's early days (you're lucky if you can actually get hold of a Raspberry
Pi) but I think a Pi with functional Gambas would have an enormous effect on
the perception and acceptance of Gambas.
Bill-Lancaster wrote:
I have a clean hard drive with fresh install of Ubuntu 12.04
Am following instructions from
http://kalaharix.wordpress.com/gambas-3/gambas-3-compile-and-install/
Everything is fine until ./reconf-all when I get bash: ./reconf-all: No
such file or directory
Any
Hi
Bill-Lancaster wrote:
I'm following instructions found at
http://kalaharix.wordpress.com/gambas-3/gambas-3-compile-and-install/
Package kdelibs4-dev is not available, but is referred to by another
package.
This may mean that the package is missing, has been obsoleted, or
is only
My experience after a compilation failure is to delete trunk and start over.
I am sure it is not essential but I am convinced there are black arts at
work :)
Bill-Lancaster wrote:
Thanks for the help. That set of commands runs fine, but
I then ran reconf all - fine
Then ./configure
works great. Thank you.
gambas-4 wrote:
Updates:
Status: Fixed
Comment #3 on issue 211 by benoit.m...@gmail.com: Gridview multiselect
http://code.google.com/p/gambas/issues/detail?id=211
You can use Text inside of Title. I will add the Title synonymous anyway,
to keep the
Gridview multiselect
ver 4522, lubuntu 11.10 32bit
1) Now works consistently GTK/QT.
2) ctrl-click adds correctly. click new line removes previous selection. All
OK
3) select line then shift-click another does not add block on either gtk/qt
thanks
gambas-4 wrote:
Updates:
Status:
gambas-4 wrote:
1) Describe the problem.
i cant deselect a row when multiple row are selected
Hi
I have an application with the same problem and have been trying to
de-construct it to get to the essence. It first occured in Gambas2 and
transferred to Gambas3 with the auto convert.
If I
Willy Raets wrote:
Is there a way in Gambas2 (or Gambas3), when using TAB-key on keyboard
to have it skip (in my case all read only) controls and just go to those
that matter for input?
2 workarounds:
firstly:
Public Sub TextBox3_GotFocus()
TextBox1.SetFocus
End
secondly:
fake
Andrea Bertini wrote:
Gui-frontend on desktop made with Gambas, database sqlite on the cloud:
is it actually possible?
SQLite is single-user update but multi-user read. You don't say whether you
(alone) are trying to share a database (e.g. home and work) or whether lots
of different users
Hi
I am trying to position a modal child window relative to its parent. When I
put 'me.top = FMain.top + 20' in the _Open class of the child, it works with
GTK but not QT (where the child window opens centered).
I can get the child window to move correctly in both GTK and QT by using a
1msec
quot;Muñoz Palominos, César Augustoquot; wrote:
How I can insert a CSV (comma-separated values) file into Sqlite3
database in Gambas2 program?
Here is an example. It won't be directly applicable to you but will give
pointers. In constructing the CSV, I used ^ as a separator. If you
It see on the Ubuntu forum that Dr Rittinghouse has updated his Gambas book
with Jon Nicholson (http://beginnersguidetogambas.com/) now 'revised for
Gambas 3'.
This is brilliant news!
--
View this message in context:
http://old.nabble.com/Gambas-3-book-tp32005062p32005062.html
Sent from the
Pino Zollo wrote:
FMain.printer_Draw.49: FMain.printer_Draw.47Type mismatch: wanted
Float, got Null instead
I am hoping the following will allow for comma decimals (would be grateful
if you could check) :
ftp://ftp.drivehq.com/charlesg628/publicfolder/BarcodeG3-0.0.5.tar.gz
I posted this on gambas-devel but don't know if it got through. I was not
registered on that list.
It is an update on the barcode example for Gambas3.
http://old.nabble.com/file/p31776060/BarcodeG3-0.0.4.tar.gz
BarcodeG3-0.0.4.tar.gz
--
View this message in context:
shordi wrote:
I can't open the file
Shordi
Hmm.. I don't have a problem (ub10.10 32bit) but have had this in the past.
Bit odd as I am just using the 'project,make,source archive' from within G3.
Could you try 'gunzip BarcodeG3-0.0.4.tar.gz' from a terminal and work from
the tar
Baris Bicer wrote:
When clicking one button the form will be shown on the same form using
panels etc.Is it possible?
Most objects have a visible property. You can, for example, layer panels on
a form (one on top of the other) and control the visible property from a
button. Here's an
Hi,
Wally-8 wrote:
on run a project in gambas3 i always get:
warning: unable to load Qt translation: en_US.UTF-8
I can confirm the error message (but in my case with en_GB.UTF-8).
32bit UBuntu 10.10, Gamrev 3338
--
View this message in context:
Hi
Gregor Burck wrote:
Can I direct print html?
I shell to htmldoc to turn the html to pdf.
e.g.
shll = htmldoc --bodyfont Sans --fontsize 6.0 --outfile
Application.path /tfc.pdf --webpage Application.path /tfc.htm
SHELL shll WAIT
then:
shll = lpr Application.path /tfc.pdf
Dimitris Anogiatis wrote:
Hey guys,
Does htmldoc have any UTF-8 support?
Looking at www.htmldoc.org I don't think there is UTF-8 support. I just use
it for formatting tables.
It is in the Ubuntu repository (sudo apt-get install htmldoc) but I don't
know about other distros.
rgds
--
SHELL echo -e \\\007\ /dev/tty10
I think I got that from this forum.
bbb888 wrote:
Pretty simple?
How can I make the computer go beep
--
View this message in context:
http://old.nabble.com/Beep--tp29997205p29998294.html
Sent from the gambas-user mailing list archive at
Just as well! I just tested my version and it doesn't work anyway. :,(
'echo -e \\007' does work from terminal.
Benoît Minisini wrote:
SHELL echo -e \\\007\ /dev/tty10
I think I got that from this forum.
bbb888 wrote:
Pretty simple?
How can I make the computer go beep
In
I have Metrologic and Symbol scanners working with 'keyboard wedge'
interface. Needs a computer with ps2 keyboard socket though. Connect scanner
to keyboard port, keyboard to scanner and computer can't tell the
difference.
minthaka wrote:
Is it possible to use Gambas2 (or 3) together with a
Use columnclick event, clear gridview, sort data, redisplay. Use data event
if you have thousands of data.
PUBLIC SUB Form_Open()
GridView1.columns.count = 2
END
PUBLIC SUB GridView1_ColumnClick(colm AS Integer)
PRINT Colm
END
rportnoy wrote:
Hey bro, how could I order by
You don't say what version Ubuntu. I can't see a reason to compile an old
version of Gambas (2.18).
Just enter:
sudo apt-get install gambas2
from terminal.
Do not add from Ubuntu repository ( e.g. 'Add/Remove' on 8.04). The
repository versions tend to be incomplete.
btw New Ubuntu Maverick
craf wrote:
In Gambas 3 can not be used and must be assigned to hfile:
Dim hFile As File
Dim line As String
hFile = Open text For Read
While Not Eof(hFile)
Line Input #hfile, line
Print linea
Wend
Fabien Bodard-4 wrote:
this is new since gb2
Not sure about that. The following works even back to 2.13
DIM j AS Integer = 0
INC Application.busy
hFileOut = OPEN /home/charles/rba/rba.csv FOR CREATE
sql = select * from stmaster
res = mdFile.$hConnStock.Exec(sql)
FOR EACH
charlesg wrote:
I can change a gridview with mode = multiple to single with:
'
Public Sub radbutSingle_Click()
GridView1.mode = 1
End
'
and it works but I cannot do it the other way round. i.e. if the mode is
single
Hi
I can change a gridview with mode = multiple to single with:
'
Public Sub radbutSingle_Click()
GridView1.mode = 1
End
'
and it works but I cannot do it the other way round. i.e. if the mode is
single then:
Thanks Fabien for your reply. After much struggle I still cannot get a result
and include the following for the amusement of all. :)
prnter is not aware of events begin and draw. Rsult is T and thus a failure.
The program does spit an empty sheet from the printer. If someone could
correct the
Hi
Converting Gambas2 to Gambas3 using QT.
draw.begin(printer) now says that printer is 'not a drawable object'
printer.name reports correctly.
Grateful any help or pointer to the documentation I can't find!
rgds
--
View this message in context:
Hi
Gambas 2.20.2 works fine on a raw install (i.e. not upgraded) 10.04 using
Karmic (9.10) dependency list.
I think there is a problem with Gambas 3 but am sure it will be sorted soon
(as ever!)
rgds
--
View this message in context:
Hi
Gambas 2.19.0 is in UB10.04 software centre but last time I tried it gave an
incomplete installation. If you don't want to compile rather do sudo apt-get
install gambas2 from the terminal and even then check in synaptic by
searching on gambas and making sure all the boxes are ticked.
rgds
--
Hi
I fixed the balloon error by loading Ubuntu package intltool (don't know the
Arch equivalent). Now it loads but still does not run so there must be other
unsatisfied dependencies. Somebody on the Ubuntu forum has got it working
(Gambas 2.99 on ub10.04 64bit) but has not spilled the beans yet.
Fabien
Thank you for that. Gambas 3 used to compile on Ubuntu 10.04 (lucid) using
the list of dependencies for 9.10 (Karmic) in the Gambas installation pages.
It now also needs intltool (or part of it?) as in sudo apt-get install
intltool.
Gambas 3 now runs but looks odd. I am way out of my
Hi,
I guess the simple answer is:
fTotal += Val(tblView[row, column].text)
However, you will eventually run into rounding errors.
there was quite a lengthy thread not long ago about this. The conclusion (if
such a thing can be reached on a forum :-)) was that currency should be
worked on as
Hi
Its the same old saga of incomplete Ubuntu repository installation. You have
to go to Synaptic, search on Gambas and install the missing components.
I have already left a post on the Lucid development section of the Ubuntu
forum to try and sort this out before final release. So far no
Hi
The ghostwriters have been a bit ephemeral.
How about a simple:
To use a property name that is also a Gambas reserved name in your personal
class, you must enclose the property name within {}.
For example:
Property Font as Font
Property Left as Integer
will both cause a compile error.
Hi
I have often been a bit paranoid about this mailing list. Using
http://old.nabble.com/Gambas-f3425.html, I find a post by Caveat replying to
tobiasboe whose original post I can't see. However when I look at
http://www.mail-archive.com/gambas-user@lists.sourceforge.net/index.html#08446,
I can
Hi
What Linux distro? What version Gambas?
If you installed from Ubuntu repository, Go into Synaptic, search on Gambas
and install missing components. The dang repository version is incomplete.
rgds
--
View this message in context:
Hi
Why not something like:
SHELL mysql -u root stock /home/charles/mySQLbackup/stockDump.sql WAIT
you could also specify a remote server.
where stockDump.sql was created by mysqldump.
rgds
--
View this message in context:
http://old.nabble.com/database-tp27723478p27724208.html
Sent from the
Hi,
I recommend you try compiling Gambas 2.19 from source. It seems a bit
involved for the first few times but you soon get the hang of it.
The advantage is that it gives the people on the forum a base line for their
assistance.
The Ubuntu versions of Gambas are created without care.
rgds
--
Hi
I use this:
'-
PUBLIC SUB txtBarcode_KeyPress()
IF InStr(1234567890, key.text) = 0 THEN
STOP EVENT
ENDIF
END
'-
PUBLIC SUB txtBarcode_KeyRelease()
SELECT
Hi
I read the question differently from Werner (probably incorrectly!)
I think you want:
PUBLIC SUB Form_Open()
DIM j AS Integer
FOR j = 40 TO 50
ListBox1.Add(Str(j) Chr(j), j)
NEXT
ListBox1[5].selected = TRUE
END
--
View this message in context:
Hi
I don't mess around with pictures much so this may be the blind leading the
blind.
The command is: PictureBox1.Picture =
Picture.Load(/home/charles/Photos/SV45.JPG)
I could not get a response to a PictureBox1_keypress event so I buried a
textbox behind the picturebox, made sure it had
Hi
Project, Options, Module symbols are public by default=yes ?
rgds
--
View this message in context:
http://old.nabble.com/Type-of-Variables-possible--tp26938813p26951829.html
Sent from the gambas-user mailing list archive at Nabble.com.
The package on Ubuntu is annoyingly incomplete. Go into Synaptic, search on
Gambas and install the rest of what should have been in the package.
Even better compile Gambas from source although 2.13 is fine for testing.
rgds
--
View this message in context:
I have got the impression over the last few days that nabble is having one of
its periodic hiccups.
I see that the http is now 'old.nabble.com'. Is there a 'new.nabble.com'?
rgds
--
View this message in context:
http://old.nabble.com/does-this-work-%28test%29-tp26254121p26262017.html
Sent
Doriano
While you are busy dumping on yourself, let me join in: you are wrong.
1) You are wrong that you do not have a good command of the English
language. I have often marvelled (in that vaguely condescending British sort
of a way :)) how good your (in particular) and every contributors (in
Hopefully this answers question 2. It is a distillation of the database
example that comes with Gambas:
You just need a gridview, a button called btnRun and a preferably large
database with lots of columns so that you can scroll around with ease
Hi,
I tried printing line-by-line directly to the raw device and got into awful
overlapping (? buffering) problems.
I think you would be far better to create a single line text file each time
and then print it with (for example):
SHELL cat /home/charles/tilRcpt/dev/lp0
It's blindingly quick
Hi all,
Can I pass a parameter to a Gambas program?
e.g myprog.gambas parm1
How do I read the parameter?
Any help gratefully received.
rgds
--
View this message in context:
http://www.nabble.com/Pass-parameter-to-Gambas-prog.-tp25002337p25002337.html
Sent from the gambas-user mailing list
I noticed that the subsequent addition of a line to the gridview caused it to
display correctly. Also a second Gridview on the form behaved itself from
_open.
So I moved the routine to display the problem gridview from form_open to
form_activate and it now works correctly.
--
View this
The following code works fine in 2.13 on Ubuntu 9.04 i386 and correctly
dispays the last line of the result in gridview gvAll
On 2.99 2224, however, the last line is not displayed or not fully
displayed. You have to scroll to show the last line. I thought it might have
something to do with the
Hi
Thank you Ron for that. A bit more messing around and I think I now
understand it.
Following on from richard terry's suggestion for simple examples, here it is
as simple as I can get it. There is nothing new here: it all comes from the
database example. Any corrections to the annotations
Hi,
I have extracted what I need from the database example. I can even get it to
do exactly what I want. But, in truth, I do not understand how it works
exactly.
'===
' FMain.class
PUBLIC $hConnLocl AS NEW Connection
PUBLIC $resData AS Result
Hi,
It really helps to know your Gambas version and Linux distribution version.
Do you mean install or use?
To use gb.net: Go into your project then Project, properties, components and
click on gb.net. Check this first. If gb.net is not an option in the list
then you will have to install it
Hi,
Not strictly an answer to your question :) but have you seen the how to...
at http://gambasdoc.org/help/
rgds
--
Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT
is a gathering of tech-side
I don't think you answered Diego's questions?
The last time I installed Gambas 2.8 from Applications, Add/Remove in Ubuntu
9.04, the installation was incomplete and I had to go into Synaptic (system,
administration, synaptic), do a search on Gambas and install the all related
packages.
rgds
--
Hi
I also have this problem quite often :(
unzip the file first with:
gunzip sales-0.0.1.tar.gz
and then extract it with a dble-click
rgds
--
View this message in context:
http://www.nabble.com/Looking-for-a-little-help-with-an-app.-tp23480295p23484102.html
Sent from the gambas-user mailing
Hi
I think Laurux uses Kugar?
There are also references here and elsewhere to using unzip on a template
created in Open Office spreadsheet, changing the values in the xml and
re-zipping back to .ods.
rgds
--
View this message in context:
Hi,
SQLite is a bit unusual. As the FAQ at www.sqlite.org says, the field type
is is one of expectation rather than definition (with the exception of an
integer primary key). This is demonstrated in your example where you have
put real numbers (0.64) into an integer field. SQLite doesn't care:
Hi
Have you changed the mode property to single (allows one line to be
selected) or multiple?
rgds
--
View this message in context:
http://www.nabble.com/gridview-tp23252958p23254524.html
Sent from the gambas-user mailing list archive at Nabble.com.
Hi
I sometimes have this problem. It works if you gunzip it first to a tar
file.
rgds
--
View this message in context:
http://www.nabble.com/I-need-a-shell-script-tp23248632p23254597.html
Sent from the gambas-user mailing list archive at Nabble.com.
Hi,
I have experienced this some time ago and it was not on ub904.
I have set your code on ub904 with built-in gam2.8 and confirm the error 11.
BUT, the fix is the same as it was in my case: get rid of the menu bar and
it compiles.
Just don't ask me what it means :)
rgds
--
View this
Stefano,
Yes, thanks for that. I am sure I can make it work.
rgds
--
View this message in context:
http://www.nabble.com/Gridview-select-and-deselect-tp23098365p23102420.html
Sent from the gambas-user mailing list archive at Nabble.com.
Hi all,
As one of the great unwashed (i.e. less proficient) Gambas users, I must say
that I prefer Richards approach using annotated code examples at a simple
level. I don't really feel comfortable with the idea of a paid-for tutorial
system and feel that 'we' as a user base should freely
Hi,
Tableview is a modifiable gridview but I did not find it very flexible.
Jacky-12 gave a brilliant solution in reply to my post 'OOP and TextBox'
Nov-21-2008
rgds
--
View this message in context:
http://www.nabble.com/How-to-populate-a-gridview-from-keyboard-tp22058169p22058870.html
Sent
Ing. Otto Domínguez
Wow! Please, please would you give the forum a page on how to compile Gambas
on Puppy?
At least one of us is not bright enough to do it for ourselves! I am sure
the Puppy forum would appreciate the same.
rgds
--
View this message in context:
Hi,
Database components are not my cup of tea (I prefer to do things the hard
way!) but they do exist in Gambas. Have a look at the database example.
rgds
--
View this message in context:
http://www.nabble.com/Gambas2-components--tp21430932p21434754.html
Sent from the gambas-user mailing list
Hi,
I guess it is because you are printing to a raw device (/dev/lp0) which has
no buffering. Two paths for you to follow:
Install (and probably modify) a printer driver such as 'generic' through
CUPS. This will introduce a buffer to the printing process.
or
Use a (very) un-subtle workaround:
Hi,
Gambas 2.9.0 is on the coverdisk of my favourite Linux mag (Linux Format
LXF114 Jan 09) again. Some very nice comments in the magazine as well. Such
as ...has blossomed into one of the finest development environments in the
free software world - the Gambas team certainly has a lot to be
Hello,
I need more control of cell entry than can be provided by tableview. I have
laboriously placed textboxes over (and under) gridview cells in much the
same way I imagine that tableview itself is constructed. It works.
Not knowing much about OOP it strikes me that there must be an easier
Jacky-12,
Ha! It will take me a little time to understand it fully but it looks
absolutely spot on.
Thank you,
--
View this message in context:
http://www.nabble.com/OOP-and-TextBox-tp20618177p20619605.html
Sent from the gambas-user mailing list archive at Nabble.com.
Hi
If you follow the installation bit in kalaharix.wordpress.com you will
currently get 2.8.2.
rgds
--
View this message in context:
http://www.nabble.com/Latest-Gambas-packages-for-Ubuntu---Broken--tp20408776p20418753.html
Sent from the gambas-user mailing list archive at Nabble.com.
Oops
Not so sure now. I still have azores.linex as a third-party-site so I guess
the upgrade could have come from there. :confused:
rgds
--
View this message in context:
http://www.nabble.com/Ubuntu-now-installs-Gambas-2.8.2-tp19683990p19684124.html
Sent from the gambas-user mailing list
Hi,
I see that Ubuntu now installs Gambas 2.8.2 by default. This is grand news.
I am interested to know whether such a change would have been instigated
from Ubuntu itself or from the Gambas community. I do not know how
Ubuntu/Debian select packages for inclusion.
If the impetus comes from
Hi,
Confirmed on Ubuntu 8.04 (as well?)
rgds
--
View this message in context:
http://www.nabble.com/Build-errors-version-...67-tp19566083p19567478.html
Sent from the gambas-user mailing list archive at Nabble.com.
-
Hi Brittany,
You have 2 options: write to a simple text file or write to a database.
Writing to a text file is simple.
'-
' Gambas class file
PUBLIC hFile AS File
PUBLIC SUB form_Activate()
'create the file if it does not exist, otherwise just open it
1 - 100 of 106 matches
Mail list logo