the output to match what QGIS needs. Just a different approach to the
problem ...
Am 07.05.20 um 12:28 schrieb jratike80:
Hi,
I fear that such a change in GeoJSON would not really correct anything but
rather move the confusion into another place.
-Jukka Rahkonen-
Frank Broniewski-6 wrote
Hi Even,
thank you very much for the hint. Although after researching on it I
fell into a rabbit hole and just barely got out, but with a decent
headache ;-)
Why do these coordinate systems and their axes have to be so
complicated, they make my head hurt ... :-)
For future readers on the
Hi everybody,
I've written a small plugin for QGIS in which I am using OGR to
transform GeoJSON from a Web API into a national CRS.
It used to work fine, but the changes introduced to axis ordering with
the latest versions of GDAL introduced errors in my code. Things aren't
anymore where they
ogr2ogr for
extracting a subregion from a larger PBF. But as far as I remember osmconvert
was superior in speed and accuracy for that task than ogr2ogr.
Dipl. Geogr. Frank Broniewski
Waldhölzbacher Str. 51
66679 Losheim am See
06872 5090684
www.frankbroniewski.com
Von: Nikos Alexandris
Gesendet
stom location and have several configs for many use
cases.
HTH
Frank
Dipl. Geogr. Frank Broniewski
Waldhölzbacher Str. 51
66679 Losheim am See
06872 5090684
www.frankbroniewski.com
Von: Nikos Alexandris
Gesendet: Dienstag, 7. November 2017 16:15
An: gdal-dev@lists.osgeo.org
Betreff: [gdal-dev]
Hi Jukka,
you will need to escape anything that can be interpreted as a control
character on the command line. But it really depends on the
interpretation context (console), but backslashes often need escaping as
well like \n for a newline. This may even happen if you write something
like
through your
email step by step and see what I can do about your mentioned problems
in the PDF.
Thanks a lot, again!
Frank
Am 16.06.2016 um 17:34 schrieb George Demmy:
On Thu, Jun 16, 2016 at 7:27 AM, Frank Broniewski
<frank.broniew...@gmail.com> wrote:
Ok, finally l found som
I just have to agree :) If I read the qgis homepage correctly, 2.16 is
due on the beginning of july (2016-07-08)
Am 17.06.2016 um 00:02 schrieb Luca Delucchi:
On 16 June 2016 at 13:32, Nyall Dawson wrote:
I can't help with this, but you may be interested to know that
witch. Probably some parsing errors or whatnot. Anyway,
copy is as good for the moment.
So, any comments on how to proceed with the neatline are greatly
appreciated. I will continue to do my own research and report back on
any successful steps achieved.
Frank
Am 18.05.2016 um 16:50 schrieb F
Hi Luca,
I developed a plugin for QGIS to export layers (vector and raster) to
geospatial PDF using GDAL library.
I'm waiting the authorization from the customer to publish it in the
plugin repository.
this sounds interesting. But your plugin cannot save a map composition
with legend, neatline
Hi Even,
Am 18.05.2016 um 17:10 schrieb Even Rouault:
Sure. There are 2 specifications mentionned in http://gdal.org/frmt_pdf.html :
- Adobe Supplement to ISO 32000:
http://www.adobe.com/devnet/acrobat/pdfs/adobe_supplement_iso32000.pdf
- OGC GeoPDF Encoding Best Practice Version 2.2 (08-139r3)
Hi,
I want to turn my QGIS map composer PDF into a GeoPDF or a geospatial
PDF. Unfortunately that is not supported, just on a per layer basis from
within the main program. I could export my map to TIFF with a world file
and use GDAL on that, but I'd like to maintain the vectors and text in
de (String) = (null)
oneway (String) = (null)
[...]
I had to add the last config option because ogrinfo told me so ;)
2016-02-22 8:14 GMT+01:00 Frank Broniewski <frank.broniew...@gmail.com>:
> Mh, maybe I should have a look at my data. I downloaded a europe extract
> from geofabr
Hi,
I am having some trouble understanding, when - or how - multilinestrings
are imported into PostGIS. I am interested in hiking routes from
OpenStreetMap and I try to figure out how I can load them correctly into
PostGIS. The corresponding OSM Wiki page would be this:
-
___ gdal-dev mailing
list gdal-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/gdal-dev
___ gdal-dev mailing
list gdal-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/gdal-dev
- --
Frank BRONIEWSKI
METRICO s.à r.l
Am 2013-09-03 14:55, schrieb Frank Broniewski:
Hi all,
I tried updating Gdal to the latest version on my FreeBSD system, but
the build fails:
snip
c postgisrasterdataset.cpp -fPIC -DPIC -o
../o/.libs/postgisrasterdataset.o
postgisrasterdataset.cpp: In function 'void GDALRegister_PostGISRaster
or shall I report this to the FreeBSD crew? Or is
my PostGIS too old ???
Frank
--
Frank BRONIEWSKI
METRICO s.à r.l.
géomètres
technologies d'information géographique
rue des Romains 36
L-5433 NIEDERDONVEN
tél.: +352 26 74 94 - 28
fax.: +352 26 74 94 99
http://www.metrico.lu
/mdenoise/
[2]
http://trac.osgeo.org/grass/browser/grass-addons/grass6/raster/r.denoise/r.denoise
--
Frank BRONIEWSKI
METRICO s.à r.l.
géomètres
technologies d'information géographique
rue des Romains 36
L-5433 NIEDERDONVEN
tél.: +352 26 74 94 - 28
fax.: +352 26 74 94 99
http://www.metrico.lu
Am 2013-07-03 16:53, schrieb Even Rouault:
Le mercredi 03 juillet 2013 16:17:14, Frank Broniewski a écrit :
Hi all,
I'm trying to warp a XYZ Grid to another CRS. My GDAL complains while
running:
gdalwarp -t_srs EPSG:3035 -of XYZ /tmp/tmpU7lQR2/in.xyz
/tmp/tmpU7lQR2/out.xyz
Output driver `XYZ
Hi,
I had this up my schedule for this week, but I see I need GDAL = 2.0.
Where might I get this? From svn (https://svn.osgeo.org/gdal/trunk/gdal)?
Thanks,
Frank
Am 2012-10-17 11:54, schrieb Even Rouault:
Selon Frank Broniewski b...@metrico.lu:
Hi Even,
I need to reinstall my OSM
@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/gdal-dev
--
Frank BRONIEWSKI
METRICO s.à r.l.
géomètres
technologies d'information géographique
rue des Romains 36
L-5433 NIEDERDONVEN
tél.: +352 26 74 94 - 28
fax.: +352 26 74 94 99
http://www.metrico.lu
Am 2012-10-14 11:43, schrieb Jukka Rahkonen:
Frank Broniewski brfr at metrico.lu writes:
Hi,
I have a directory with appr. 2800 aerial images, each 1kmx1km. I'm
using this source for a Mapserver WMS layer. Unfortunately the amount of
data to process is way too much for a Mapserver WMS
together. The route I wanted to was
1) build a VRT from the images
2) use gdal_translate to get a new geotiff with a smaller size (pixel wise)
Is this a valid route to go?
Many thanks,
Frank
--
Frank BRONIEWSKI
METRICO s.à r.l.
géomètres
technologies d'information géographique
rue des Romains 36
to open it in a text
editor or in Quantum GIS or guess by file extension?! Without more
information it is hard to help ... even the term DEM file is not very
precise, do you mean a specific file type with that extension or just
a terrain model like SRTM or GeoTIFF?
Frank
--
Frank BRONIEWSKI
.n6.nabble.com/Hillshade-Topographic-Map-tp4490698p4490698.html
Sent from the GDAL - Dev mailing list archive at Nabble.com.
___
gdal-dev mailing list
gdal-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/gdal-dev
--
Frank BRONIEWSKI
METRICO
, I've used ldconfig after each build of each lib.
Any clue is welcome, maybe I miss something obvious.
Thanks
ThomasG
___
gdal-dev mailing list
gdal-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/gdal-dev
--
Frank BRONIEWSKI
METRICO s.à
$ make
but without success
Any hints?
Frank
--
Frank BRONIEWSKI
METRICO s.Ã r.l.
géomètres
technologies d'information géographique
rue des Romains 36
L-5433 NIEDERDONVEN
tél.: +352 26 74 94 - 28
fax.: +352 26 74 94 99
http://www.metrico.lu
?
Frank
--
Frank BRONIEWSKI
METRICO s.à r.l.
géomètres
technologies d'information géographique
rue des Romains 36
L-5433 NIEDERDONVEN
tél.: +352 26 74 94 - 28
fax.: +352 26 74 94 99
http://www.metrico.lu
___
gdal-dev mailing list
gdal-dev
rings a bell somewhere. Since CopyDataSource just sits
there and does nothing and needs to be terminated I lack something I can
investigate in.
Many thanks
Frank
PS
Source code can be seen here:
https://bitbucket.org/frankbroniewski/geoactions/
--
Frank BRONIEWSKI
METRICO s.à r.l.
géomètres
() is very basic, but it should work for what it is supposed to
do, and not block forever.
Best ragards,
Even
--
Frank BRONIEWSKI
METRICO s.à r.l.
géomètres
technologies d'information géographique
rue des Romains 36
L-5433 NIEDERDONVEN
tél.: +352 26 74 94 - 28
fax.: +352 26 74 94 99
http
keyword argument 'as_object'
from osgeo import gdal
gdal.VersionInfo()
'1730'
Maybe it's only my rather old gdal version and this is already fixed,
but I thought I mention this better
HTH
Frank
--
Frank BRONIEWSKI
METRICO s.à r.l.
géomètres
technologies d'information géographique
rue des Romains
11:54, schrieb Even Rouault:
Frank
Should be fixed in GDAL 1.8.0. See http://trac.osgeo.org/gdal/ticket/3870
Best regards,
Even
--
Frank BRONIEWSKI
METRICO s.à r.l.
géomètres
technologies d'information géographique
rue des Romains 36
L-5433 NIEDERDONVEN
tél.: +352 26 74 94 - 28
fax.: +352
___
gdal-dev mailing list
gdal-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/gdal-dev
--
Frank BRONIEWSKI
METRICO s.à r.l.
géomètres
technologies d'information géographique
rue des Romains 36
L-5433 NIEDERDONVEN
tél.: +352 26 74 94 - 28
fax.: +352 26 74 94 99
http://www.metrico.lu
#Writing_To_Standard_Output
--
Frank BRONIEWSKI
METRICO s.à r.l.
géomètres
technologies d'information géographique
rue des Romains 36
L-5433 NIEDERDONVEN
tél.: +352 26 74 94 - 28
fax.: +352 26 74 94 99
http://www.metrico.lu
___
gdal-dev mailing list
gdal-dev@lists.osgeo.org
()
out_drv = out_ds.GetDriver()
out_drv is None
True
Greetings
Frank
--
Frank BRONIEWSKI
METRICO s.à r.l.
géomètres
technologies d'information géographique
rue des Romains 36
L-5433 NIEDERDONVEN
tél.: +352 26 74 94 - 28
fax.: +352 26 74 94 99
http://www.metrico.lu
) to gdal
instead of path names, isn't there?
Thanks
Frank
[1] http://gdal.org/python/
[2]
http://osgeo-org.1803224.n2.nabble.com/gdal-dev-NET-and-OGR-writing-to-stream-td6638444.html#a6648549
--
Frank BRONIEWSKI
METRICO s.à r.l.
géomètres
technologies d'information géographique
rue des
)
target_feature.SetGeometryDirectly(geometry)
target_layer.CreateFeature(target_feature)
Full code:
http://paste.pocoo.org/show/344283/
Python test file
http://paste.pocoo.org/show/344284/
Frank
--
Frank BRONIEWSKI
METRICO s.à r.l.
géomètres
technologies d'information
definition matching the Layer.GetLayerDefn(). I would think that most (if not
all) drivers relies on that assumpution, although I don't see it explicitely
documented in
http://gdal.org/ogr/ogr__api_8h.html#301d319111285a47fe6cda6e079214f8
Frank
--
Frank BRONIEWSKI
METRICO s.Ã r.l.
géomètres
___
gdal-dev mailing list
gdal-dev@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/gdal-dev
--
Frank BRONIEWSKI
METRICO s.à r.l.
géomètres
technologies d'information géographique
rue des Romains 36
L-5433 NIEDERDONVEN
tél.: +352 26 74 94 - 28
fax.: +352 26 74 94 99
(target_feature)
Basically a stripped version of ogr2ogr.py
I will make a new version and post it here on the list, so everyone can
have a look and maybe learn something from it
Frank
[1] http://www.gdal.org/ogr/ogr_formats.html
[2] http://www.gdal.org/ogr/classOGRLayer.html
--
Frank BRONIEWSKI
METRICO
the C API in the
future then ...
Thanks,
Frank
[1] http://docs.python.org/library/functions.html#list
Am 09.02.2011 18:15, schrieb Ari Jolma:
On 02/09/2011 05:36 PM, Frank Broniewski wrote:
Yes, thank you. GetPointCount() works. Another thing I noticed:
point = geometry.GetPoint
and post another,
improved version next week.
Frank
Am 10.02.2011 20:24, schrieb Even Rouault:
Le jeudi 10 février 2011 09:09:45, Frank Broniewski a écrit :
Even,
thank you for your verbose and helpful answer!
Am 09.02.2011 20:24, schrieb Even Rouault:
Several points :
1
\site-packages\osgeo\ogr.py, line 2672, in lambda
__getattr__ = lambda self, name: _swig_getattr(self, Geometry, name)
File C:\Python26\lib\site-packages\osgeo\ogr.py, line 34, in
_swig_getattr
raise AttributeError,name
AttributeError: GetNumPoints
Many thanks
Frank
--
Frank BRONIEWSKI
it is mentioned here [1]
Frank
[1]
http://www.gdal.org/ogr/classOGRLineString.html#ab63760022e49a795477f2fd31da059f
Am 09.02.2011 15:44, schrieb Ari Jolma:
On 02/09/2011 04:19 PM, Frank Broniewski wrote:
Hi,
just a quick question: isn't GetNumPoints implemented on a geometry in
ogr python
transforming. I looked
already at the python version of ogr2ogr, but I don't understand well
what's going on in there ...
Frank
--
Frank BRONIEWSKI
METRICO s.à r.l.
géomètres
technologies d'information géographique
rue des Romains 36
L-5433 NIEDERDONVEN
tél.: +352 26 74 94 - 28
fax.: +352
Hello,
Is it possible to get a string representation of text-datasources (gml,
geojson, etc.) from a OGRLayer or OGRDatasource? Is it maybe possible to
write to STDOUT instead of a file?
Many thanks for tipps
Frank
___
gdal-dev mailing list
to create a feature object. Feature class has SetField and
GetField methods for storing and retrieving the attributes of a feature.
I hope this helps,
Ari
On 12/14/2010 09:33 AM, Frank Broniewski wrote:
Hello,
I have a question concerning OGR's metadata or attribute management
when converting
Am 15.12.2010 16:47, schrieb Howard Butler:
On Dec 15, 2010, at 9:30 AM, Ari Jolma wrote:
On 12/15/2010 05:11 PM, Frank Broniewski wrote:
Hello Ari,
yes that is definitely helpful. But I still wonder if it might be
easier/quicker to use GeoJSON as a interchange format and tranform from
Hello,
I have a question concerning OGR's metadata or attribute management when
converting between geodata vector formats. My question is maybe only
loosely related to OGR and aims at the internal management of attribute
data.
From what I have read and understood from the documentation, OGR
49 matches
Mail list logo