Am Sonntag, den 05.10.2008, 00:09 +0100 schrieb Peter Clifton:
> On Sat, 2008-10-04 at 10:22 -0400, DJ Delorie wrote:
> > > Is there something similar for copper clearing of pads/pins in polygons?
> >
> > Not that I'm aware of. Again, you could write one pretty easily by
> > copying the existing
On Sun, 2008-10-05 at 18:33 -0700, Steven Michalske wrote:
> >
> > Not having a good laptop week.
> >
>
> May I suggest looking into an Apple laptop, I put loving care into
> each one I work on :-P
You work for Apple? Cool.
Yes, Apple laptops are very nice... will certainly take a good look at
>
> Not having a good laptop week.
>
May I suggest looking into an Apple laptop, I put loving care into
each one I work on :-P
> --
> Peter Clifton
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/g
> changeclearsize(selected,10,mil)
I keep forgetting about that, because it reduces the clearance on
bigger clearances too, which usually isn't what I want.
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listin
On Sat, 2008-10-04 at 10:22 -0400, DJ Delorie wrote:
> > Is there something similar for copper clearing of pads/pins in polygons?
>
> Not that I'm aware of. Again, you could write one pretty easily by
> copying the existing one.
changeclearsize(selected,10,mil)
Also works for mask, if you selec
> Is there something similar for copper clearing of pads/pins in polygons?
Not that I'm aware of. Again, you could write one pretty easily by
copying the existing one.
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/ma
Am Samstag, den 04.10.2008, 10:07 -0400 schrieb DJ Delorie:
> There is a MinMaskGap() action to increase the mask gap to vendor
> minimums. What you can do is this:
>
> * Enable the mask layer
>
> * Select everything that needs the mask set
>
> * Use Ctrl-Shift-K to reduce the mask as much as y
There is a MinMaskGap() action to increase the mask gap to vendor
minimums. What you can do is this:
* Enable the mask layer
* Select everything that needs the mask set
* Use Ctrl-Shift-K to reduce the mask as much as you can for
everything selected
* :MinMaskGap(Selected,=8,mil) to increas
8 matches
Mail list logo