Ed & Angie S. <[EMAIL PROTECTED]> wrote:
> I looked at the autonumber feature briefly but with a preconceived notion
> that it wouldn't do all of the pages of a flat schematic. From your comment
> it seems maybe this is wrong. If I select the "whole hierarchy" instead of
> "current page" will
erence designators across all
pages of a flat schematic?
Ed
- Original Message -
From: "Levente" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, November 06, 2007 12:21 PM
Subject: Re: gEDA-user: Multiple symbol gschem components
> Ed & Ang
From: "John Luciani" <[EMAIL PROTECTED]>
To: "gEDA user mailing list"
Sent: Tuesday, November 06, 2007 7:05 AM
Subject: Re: gEDA-user: Multiple symbol gschem components
> On 11/5/07, Ed & Angie S. <[EMAIL PROTECTED]> wrote:
>
>> Oddly, grenum see
Ed & Angie S. <[EMAIL PROTECTED]> wrote:
> I used grenum to initially set the bulk my reference designators. This
> seemed to be the way to go since I had other components that were slotted
> and had U1 which used multiple symbols for which I manually set reference
> designator values prior to ru
[EMAIL PROTECTED]>
To: "gEDA user mailing list"
Sent: Tuesday, November 06, 2007 8:10 AM
Subject: Re: gEDA-user: Multiple symbol gschem components
>
> On Nov 5, 2007, at 9:18 PM, Ed & Angie S. wrote:
>
>> I'm trying to created a component for gschem where two s
On Nov 5, 2007, at 9:18 PM, Ed & Angie S. wrote:
> I'm trying to created a component for gschem where two separate
> symbols are used to represent a single component because of the
> large number of signals involved. I found a recommendation in the
> archives suggesting that this could be
On 11/5/07, Ed & Angie S. <[EMAIL PROTECTED]> wrote:
> Oddly, grenum seemed to work fine with the exception that it assigned U1 to
> an additional component even though U1 had already been used for my multiple
> symbol component. Initially I thought this was the cause of the duplicate
> reference
I'm trying to created a component for gschem where two separate symbols are
used to represent a single component because of the large number of signals
involved. I found a recommendation in the archives suggesting that this could
be accomplished by simply setting the reference designator the sa
8 matches
Mail list logo
