On Fri, Mar 24, 2006 at 01:39:55PM -0500, Phil Taylor wrote:
>
> Karel and Kai,
>
> I've been polling. You both have been outspoken on footprint creation, so to
> speak.
>
> Do you make footprints in a text editor or just on-screen?
I make them onscreen only. It used to be a pain in the ass
Phil Taylor wrote:
> I've been polling. You both have been outspoken on footprint creation, so to
> speak.
I have done only one footprint from scratch and modified the massive
amount of three. So I did not feel like I could contribute a stable
opinion.
>
> Do you make footprints in a text edit
Karel,
whoops, I just saw your footprint creation guide ... very uh, detailed.
Phil
Karel and Kai,
I've been polling. You both have been outspoken on footprint creation, so to
speak.
Do you make footprints in a text editor or just on-screen?
Phil
kmk <[EMAIL PROTECTED]> wrote:
> Karel Kulhavy wrote:
>
> > That's because I missed it there out. Next time I used the guide
> Karel Kulhavy wrote:
>
> > That's because I missed it there out. Next time I used the guideline I
> > had fixed it. And I also did other enhancements. Current version is at:
> > http://ronja.twibright.com/guidelines/footprints.php
>
> Karel, please make sure, that the footprint creation check l
Karel Kulhavy wrote:
> That's because I missed it there out. Next time I used the guideline I
> had fixed it. And I also did other enhancements. Current version is at:
> http://ronja.twibright.com/guidelines/footprints.php
Karel, please make sure, that the footprint creation check list in the
wik
On Wed, Mar 22, 2006 at 09:41:14PM +0100, Philipp Klaus Krause wrote:
> Dan McMahill wrote:
> > Philipp Klaus Krause wrote:
> >> Philipp Klaus Krause wrote:
> >>
> >>> I have created some custom pcb footprints, but their soldermask
> >>> clearance is way too big: The pads onb my PLCC32 and smd reso
El mié, 22-03-2006 a las 15:50 -0500, Stuart Brorson escribió:
> > It seems I should pay more attention to the manual "where there's nice
> > short instructions for creating footprints, which doesn't cover things
> > like soldermasks though" (and less to the wiki, where there is an
> > obscure 36-s
> It seems I should pay more attention to the manual "where there's nice
> short instructions for creating footprints, which doesn't cover things
> like soldermasks though" (and less to the wiki, where there is an
> obscure 36-step instruction to create footprints, but it doesn't say
> that you sho
Dan McMahill wrote:
> Philipp Klaus Krause wrote:
>> Philipp Klaus Krause wrote:
>>
>>> I have created some custom pcb footprints, but their soldermask
>>> clearance is way too big: The pads onb my PLCC32 and smd resonator are
>>> free from soldermask, but everything in between them, too.
>>>
>>> I
Philipp Klaus Krause wrote:
Philipp Klaus Krause wrote:
I have created some custom pcb footprints, but their soldermask
clearance is way too big: The pads onb my PLCC32 and smd resonator are
free from soldermask, but everything in between them, too.
I already tried
“changeclearsize(selectedobj
> It seems you have to" enable view soldermask" for the clearance
> command to work.
ChangeClearSize changes the polygon clearance normally, but if the
mask is showing, it changes the mask clearance instead.
Philipp Klaus Krause wrote:
> I have created some custom pcb footprints, but their soldermask
> clearance is way too big: The pads onb my PLCC32 and smd resonator are
> free from soldermask, but everything in between them, too.
>
> I already tried
> “changeclearsize(selectedobjects, thickness/2+0.
I have created some custom pcb footprints, but their soldermask
clearance is way too big: The pads onb my PLCC32 and smd resonator are
free from soldermask, but everything in between them, too.
I already tried
“changeclearsize(selectedobjects, thickness/2+0.1mm
and
changeclearsize(selectedobjects,
14 matches
Mail list logo