Hi,
for some reason I dont have any floppy devices. When I ran MAKEDEV fd* under
root I got
".devfsd presence implies active DevFS. Aborting MAKEDEV invocation."
I checked the man page for devfsd but it only confused me more.
ANy ideas?
--
Best Regards,
Bruce
"They that can give up essent
-02-06 at 15:04, Bruce E. Harris wrote:
> > Hi,
> >
> > for some reason I dont have any floppy devices. When I ran MAKEDEV fd*
> > under root I got
> >
> > ".devfsd presence implies active DevFS. Aborting MAKEDEV invocation."
> >
> > I checke
modprobe floppy showed:
modprobe: Can't locate module floppy
however when I cked my kernel I see floppy suport it compiled into the
kernel--not a module. WOuld that make a difference? Everwhere else I
looked, floppy support is there.
On Friday 06 February 2004 04:27 pm, Bruce E. Harris
I have cdrecord working under SuSE Linux 8.1 just fine, but having problems
with Gentoo.
When I run cdrecord -scanbus
I get this error:
bash-2.05b$ cdrecord -scanbus
Cdrecord 2.01a14 (i686-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling
Linux sg driver version: 3.1.24
Using libscg version
nel /bzImage-2.4.20-r8 root=/dev/sda3 hda=ide-scsi
> >
> > Regards,
> > Luke
> >
> > -Original Message-
> > From: Bruce E. Harris [mailto:[EMAIL PROTECTED]
> > Sent: Monday, November 24, 2003 1:02 PM
> > To: Gentoo Maillinglist
> > Subject:
Thanks everyone. hdx=ide-scsi
did the trick.
On Monday 24 November 2003 04:32 pm, Barry Marler wrote:
> You'll have use hdx=ide-scsi in grub for gentoo, just like you do for suse.
>
> On 16:34 Mon 24 Nov, Bruce E. Harris wrote:
> > I have 3 IBM SCSI HDDs and no IDE HDD
ok, this one have me at a loss. I am trying to access my floppy via Gentoo and
having no luck. I tried to create a floppyfw and coyote floppy and it could
not access /dev/fd0. Looking in at /dev I see fd/ but not fd0. I added
/dev/fd0 to my etc/fstab but no change. I cant not mount my floppy eit
, Alexander Puchmayr wrote:
> On Sunday 28 December 2003 23:04, Bruce E. Harris wrote:
> > ok, this one have me at a loss. I am trying to access my floppy via
> > Gentoo and having no luck. I tried to create a floppyfw and coyote floppy
> > and it could not access /dev/fd0. Looking in
How do I access a compact flash memory card thru Gentoo? I dont see any
storage device icons on my desktop, and do not see this card listed in
/etc/fstab but do see it under /etc/mtab as
/dev/sda1 /boot ext2 rw,noatime 0 0
--
Best Regards,
Bruce
"They that can give up essential liberty to o
is SCSI and dual Althon MP.
On Friday 02 January 2004 05:18 pm, Norbert Kamenicky wrote:
> Bruce E. Harris wrote:
> > How do I access a compact flash memory card thru Gentoo? I dont see any
> > storage device icons on my desktop, and do not see this card listed in
> > /etc/fsta
Thanks, looks like I got it. For my compact flash its:
mount -t vfat /dev/sdd1 /mnt/flash
Now to update fstab.
BR Bruce
On Friday 02 January 2004 08:30 pm, Jerry McBride wrote:
> On Friday 02 January 2004 07:39 pm, Bruce E. Harris wrote:
> > Sorry, wrong line. the correct /et
I see two old games listed, only one is d/l via bittorrent, (and I am having
firewall problems in that regard). Two iso's URLs are listed, but nothing
there? Have they gone belly up>?
--
Best Regards,
Bruce
"They that can give up essential liberty to obtain a little temporary safety
deser
i ran this on my system just to check for broken, missing links, and it found
a lot can cleaning up my system now. Thanks for the tip.
Is it a good idea to runs this say once a week?
BR Bruce
On Sunday 04 January 2004 02:22 pm, Tom Wesley wrote:
> On Sun, 2004-01-04 at 18:57, Brett I. Holcomb w
Hi
I am new Gentoo user. I got it installed and compiled but went I rebooted I
got a panic error, the root partition is not mounted (all my HDDs are SCSI).
It looks like I did not get the SCSI module to load during boot. I do have a
working Linux system up now, and able to mout and edit everyt
I have been trying for about 2 wks now, with no luck. I am getting closer,
but...
I have my scsi card detected now. However I keep getting this error during
boot up
modprobe Cant locate module /dev/SWAP
modprobe Cant locate moudle /dev/ROOT
Something about a corupt reiserfs (not true. I can mo
Boy do I feel stupid. Never crossed my mind that these were
place holder, I figured Gentoo has a different idea
it works now.
On Saturday 27 September 2003 6:13 pm, Mark Knecht wrote:
> On Sat, 2003-09-27 at 13:42, Bruce E. Harris wrote:
> > I have been trying for about 2 wks now
I must have blasted that part, since everything else went so smoothly, and
I am not new to Linux. Other distro I have used made fstab pretty much
automatically and not much editing needed.
One odd thing I did notice, is in my fstab I saw xfs instead of reiser for my
root partition. I have no ide
Hi,
I finally got Gentoo up and running--its great. I have my video card working,
but how can I test it to see if its working in accelerated 3D?
I have a ATI FireGL 8800.
Thanks
Bruce
--
[EMAIL PROTECTED] mailing list
Hi,
Everytime I reboot, I lose my gateway, and have to configure it by hand.
Were is that info suppose to be so I can add it to the file and save it? I
followed the instructins and got my /etc/host and /etc/resolve correct, but
dont know where the gateway data would be.
TIA
Bruce
--
[EMAIL P
Thanks
On Tuesday 30 September 2003 14:50, Jeffrey Smelser wrote:
> /etc/conf.d/net
>
> Last line.
>
> > -Original Message-----
> > From: Bruce E. Harris [mailto:[EMAIL PROTECTED]
> > Sent: Tuesday, September 30, 2003 10:36 AM
> > To: [EMAIL PROTECTED]
&g
I looked there, a generic gateway ip was there and commented out.
I changed it.
Thanks.
On Tuesday 30 September 2003 14:54, gabriel wrote:
> On Tue, 2003-09-30 at 11:36, Bruce E. Harris wrote:
> > Everytime I reboot, I lose my gateway, and have to configure it by
> > hand.
&
Here's my results. Is this a good thing?
direct rendering: Yes
OpenGL renderer string: Fire GL 8800 128MB DDR Athlon (3DNow!) (FireGL)
On Tuesday 30 September 2003 18:12, Donnie Berkholz wrote:
> On Tue, 2003-09-30 at 11:34, Bruce E. Harris wrote:
> > Hi,
> >
> > I
I added my usually user to "games" group, and now su does not work.
I have no idea what I did to break it
Any recommendations?
TIA
Bruce,
--
[EMAIL PROTECTED] mailing list
That was it, I never used usermod before, and did not realize all groups have
to be added, even existing ones to lkeep them. Thanks
On Wednesday 01 October 2003 15:56, Jeffrey Smelser wrote:
> hmm, did you try usermod -G wheel,games user?
>
> > -Original Message-
>
Thanks, that worked.
On Tuesday 07 October 2003 07:06, Donnie Berkholz wrote:
> On Tue, 2003-10-07 at 18:50, [EMAIL PROTECTED] wrote:
> > I am trying to get a jabber server working under Gentoo. I emerged the
> > package, but noticed there is no jabber.xml file for configuration. In
> > fact, mo
I checked the website but can find info on setting up my joystick.
Can someone point me the way pse.
Tia
BRuce
--
[EMAIL PROTECTED] mailing list
I am able to mount this VCD, and I can see four directories, but it wont play
on anything. I tried gxine, and aKtion, yet neither can see the contents
either.
Where can I go from there?
TIA
Bruce
--
[EMAIL PROTECTED] mailing list
ed YUY2
Selected video codec: [qdv] vfm:dshow (Sony Digital Video (DV))
==
Audio: no sound
Starting playback...
V: 0.26 0% 0% 0.0% 0 0 0%
Total Unfree 1146 bytes cnt 13 [(nil),0]
Exiting... (End of file)
bash-2.05b$
On Saturday 18 October 2003 12:23, Dan McCombs
% 0.0% 0 0 0%
Total Unfree 1146 bytes cnt 13 [(nil),0]
Exiting... (End of file)
On Monday 20 October 2003 06:02, Eric Marchionni wrote:
> Bruce E. Harris wrote:
> >mplayer is getting closer then and thing else I tired. It starts then
> > fails with these errors. I noticed I d
I dont know how it happen, but when I use KDM or GDM and launch KDE, the
correct desktop starts then switchs over the Gnome, losing all the configs I
had under KDE.
I have rebooted several times, and no luck. How can fi fixt this?
TIA
Bruce
--
[EMAIL PROTECTED] mailing list
30 matches
Mail list logo