I have "iptables -A POSTROUTING -t nat -o ppp0 -j MASQUERADE" command
"running" and
forwarding enabled in /etc/conf.d/iptables, but it doesn't work. I can ping between
machines in the LAN but not outside (except the gateway machine, of course). What am I
doing wrong? I have all the modules
Is there some kind of office that is not so huge like Open Office? I actually
need Excel,
but if there is an office that is small enough (source not above 20mb) I would like to
test it. Please anyone. I need it for some test on the university. Thanx. :o)
_
Koji ce
On Mon, 29 Dec 2003 23:07:23 +0100
"Gerhard W. Gruber" <[EMAIL PROTECTED]> wrote:
> The subjectline says it. I'm using gentoo now for about three weeks and I
> really like it. :) Previously I was using Suse and of course the ease of
> installation and system administration is quite nice, but gento
On Sun, 28 Dec 2003 10:05:54 +0100
"Gerhard W. Gruber" <[EMAIL PROTECTED]> wrote:
> I did an esearch and found the following two packages:
>
> * app-cdr/dvdrtools
> Latest version available: 0.1.4
> Latest version installed: [ Not Installed ]
> Size of downloaded files: 1,407 k
Is there a program that can check disk for damages? I need a surface scan
similar to
windows because I suspect that there is something wrong with one of my discs. If it is
important, my hard disk is IDE. Thanx
_
Koji ce mi ovo Mandrak
U se i u svoje SuSE
--
[EMA
On Tue, 25 Nov 2003 10:51:43 -0500
"brett holcomb" <[EMAIL PROTECTED]> wrote:
> I modified the jack-cvs ebuilds to get the latest cvs and
> also to enable capabilities (someone added jack-caps but
> the ebuild never made it into portage), and correct a
> problem with jackstart dying on a md5 su
On Sun, 23 Nov 2003 20:57:47 -0700
Collins Richey <[EMAIL PROTECTED]> wrote:
> > Does this work on 2.6 kernels yet? Last i checked (and this is still
> > what im doing) one needs use the dev=/dev/hdc workaround.
> >
>
> Works for me on 2.6.0_test8.
Could you send us a config file?
_
Modem is ISA 3Com. I know that it works fine (just to be at my friends
computer), but at
my machine it connects on v34 protocol (maximum of 33600). I also know that this has
something to do with my board, but don't know what. Is there anyone who knows the
solution
or has a 3Com manual for
x27;d get a message like this.
>
> Don't worry too much about the spurious interrupt message.
>
> - Mark
>
>
> --
> [EMAIL PROTECTED] mailing list
>
I don't agree. You can mount ext3 with only ext2 enabled in kernel. Maybe you
need to
pass root=/dev/something to kernel?
Meka[ni]
--
[EMAIL PROTECTED] mailing list
thing
that needs to be stable like a wall but I wouldn't like to have an applications that
crash
every minute. Thanx :o)
Meka[ni]
--
[EMAIL PROTECTED] mailing list
process). Thanx :o)
Meka[ni]
--
[EMAIL PROTECTED] mailing list
#x27;s (almost) just like /usr/src/linux-2.6.0-test9/include. The only difference is
that there are some new file (no wonder) in test9, but all the files from linux-headers
are there. Thanx :o)
Meka[ni]
--
[EMAIL PROTECTED] mailing list
Why is test8 built even if I set ACCEPT_KEYWORDS="~x86"? Some time ago it was
building
test9 and now it is masked or ... I don't know.
Meka[ni]
--
[EMAIL PROTECTED] mailing list
is to copy
~user/.Xauthority
to ~root where user is the one running X. Another way is to allow everybody to use X
but
I can't remember how to do it. Good luck :o)
Meka[ni]
--
[EMAIL PROTECTED] mailing list
gt; From here to there
> and there to here,
>funny things are everywhere. -- Dr Seuss
>
>
>
> --
> [EMAIL PROTECTED] mailing list
>
Two solutions:
1. add you're user to wheel group (useradd -G wheel ) and use su.
2. chmod +s
lag when you were emerging ardour?
Meka[ni]
--
[EMAIL PROTECTED] mailing list
I know that this has (almost) nothing to do with this thread, but where to
find doc about
prelinking, how it is done and what is it?
Meka[ni]
--
[EMAIL PROTECTED] mailing list
reboot` if you want to do it from terminal.
Meka[ni]
--
[EMAIL PROTECTED] mailing list
When I try to emerge mixxx it stops at one point and says it can not find
QGLWidget:: and a lot of text. I know I should specify some lib to the
linker but I don't know what that lib is. I looks like QT library (yeah,
I've discovered hot water), but I've tried everything from the QT's lib dir
a
Is there something like qjackconnect that is not written for qt? gtk version 1
would be
very nice. :o)
Meka[ni]
--
[EMAIL PROTECTED] mailing list
On Thu, 16 Oct 2003 22:54:59 -0500
Richard Kilgore <[EMAIL PROTECTED]> wrote:
> Am Mittwoch, 15. Oktober 2003 00:48 schrieb Meka[ni]:
> > Just to be sure, I'll tel you the exact commands I've executed.
> > emerge nvidia-kernel
> > emerge nvidia-glx
> &g
to try, because the original poster said that he was describing all the
> EXACT steps he took, would be to load the glx module *INSIDE XF86Config
Done that, too. I see I'll just change the card. Right? :o( I tested the damn
thing on
Mandrake and it worked. I guess it doesn't like Gentoo. :o) Thanks anyway.
Meka[ni]
--
[EMAIL PROTECTED] mailing list
On Wed, 15 Oct 2003 00:55:35 +0200
Renat Golubchyk <[EMAIL PROTECTED]> wrote:
> On Wednesday 15 October 2003 00:48, Meka[ni] wrote:
> Change the permissions for dri in /etc/security/console.perms like this:
> Old setting:
> 0600 0600 root
> New setting:
>
/XFree86.0.log that it can not open /dev/nvidia0 for
reading
although the file is present and has rw-rw-rw- for flags. Please save me this mess! :o)
Meka[ni]
--
[EMAIL PROTECTED] mailing list
> --
> [EMAIL PROTECTED] mailing list
>
Ah, yeah. I've forgot to mention that I've done that. In XF86Config is the
current
setting "nv", because I can't use the nvidia. Also, I've loaded nvidia module, but no
change. Even if I don't do it manually, kernel loads nvidia it self. I'm suck. :o(
Meka[ni]
--
[EMAIL PROTECTED] mailing list
On Sun, 12 Oct 2003 11:58:22 -0700
Doug Weimer <[EMAIL PROTECTED]> wrote:
> On Sun, 2003-10-12 at 11:43, Meka[ni] wrote:
>
> > Already done that. Could you please check if you have that file on you source
> > tree? I
> > really don't what to do anymor
u have that file on you source
tree? I
really don't what to do anymore.
Meka[ni]
--
[EMAIL PROTECTED] mailing list
heart with regrets of yesterday and the
> worries of tomorrow, you have no today to be thankful for.
>
>
>
> --
> [EMAIL PROTECTED] mailing list
>
It complains about missing version.h. Although, I can compile the kernel,
there is no
such file. What to do?
Meka[ni]
--
[EMAIL PROTECTED] mailing list
s. If there is a way to get it going on development-sources, I wold
be
glad to hear how to do it. Thanx. :o)
Meka[ni]
--
[EMAIL PROTECTED] mailing list
s have on mind
that it may not be accurate. Good luck and tell us the results.
PS. Maybe the best way to really check the voltage is to check it inside the power
source.
So, screwdriver in your hands and ... drill it. :o)
Meka[ni]
--
[EMAIL PROTECTED] mailing list
Well, the dumbest possible solution is to reinstall windows. That should work.
Can you
tell me where it hangs? Does it print anything on the screen?
Meka[ni]
--
[EMAIL PROTECTED] mailing list
>
Well, maybe you have to link /dev/sequencer to /dev/snd/seq. I've never tried
it. In
order /dev/snd/seq to appear you have to load snd-emu10k1-synth. Good luck and let us
know
did/how you solved the problem. :o)
Meka[ni]
--
[EMAIL PROTECTED] mailing list
o a "make" in the
> directory, compress and send it to [EMAIL PROTECTED]
>
> thanks
>
> cu denny
>
> -----
> This mail sent through IMP: http://horde.org/imp/
>
> --
> [EMAIL PROTECTED] mailing list
>
Read the documentation that comes with kernel about bttv. There is a list of
other things
you have to include in kernel it self or as a module. Good luck. :o)
Meka[ni]
--
[EMAIL PROTECTED] mailing list
ance.
I am runing gcc-3.3.1-r1 and no problems. What was the bug in r2?
Meka[ni]
--
[EMAIL PROTECTED] mailing list
On boot iptables script in /etc/runlenvels/boot/iptables complains about
iptables-restore. I know that /var/lib/iptables/rules-save should exist, but what to
put
int that file? Thanx. :o)
Meka[ni]
--
[EMAIL PROTECTED] mailing list
Samba documentation says that there should be smbprint and
smbprint.sysv scripts, but I can't find it. Listing (epm -ql
samba) doesn't show it, too. I know that smbprint is using
smbclient for printing, but how can I use smbclient directly if
there is no smbprint? I've read the documentation an
kind thing to post to a list full of newbies.
>
> Uhh, that's kind of the point (assuming Windows is on /dev/hda1). It was
> meant to be a joke.
>
> --
> Andrew Gaffney
>
>
> --
> [EMAIL PROTECTED] mailing list
>
And what time does it change? Time of files or system time? In later case, you
only need
to change /etc/rc.conf so CLOCK="local". Good luck :o)
Meka[ni]
--
[EMAIL PROTECTED] mailing list
ing list
>
/etc/devfsd.conf. Good luck
Meka[ni]
--
[EMAIL PROTECTED] mailing list
Philippe Van Hecke <[EMAIL PROTECTED]>:
> I am playing with many kernel version. And must emerge
> alsa-driver,nvidia-kernel for each kernel i install.
>
> My question is there is way when i emerge these two modules, to tell,
> with command line option to not unmerge the previous merged module
Well, for those who know what this is the question is: "Is there any chance
that I will
work with that card on Linux?" I know I should ask that Yamaha and I did, but I was
wondering if there is someone who somehow got drivers for this piece of hardware. Thanx
:o)
______
Is there a way to tell emerge not to install linux-headers, because I'm using
another
kernel 2.6 and I really hate to have old sources hanging around? Thanx! :o)
Meka[ni]
--
[EMAIL PROTECTED] mailing list
s CFLAGS for my Celeron 300A (Mendocino)? Thanx a lot. :o)
Meka[ni]
--
[EMAIL PROTECTED] mailing list
that maybe it's the same problem, but I don't know where wvdial stores
username and password. Help please. I know that this can be done (used SuSE and it
worked
there). Thanx a lot
Meka[ni]
--
[EMAIL PROTECTED] mailing list
> --
> cu denny
>
> Gnupg key can be found under pgp.mit.edu, key ID 0x73137598
>
What kind of TV card do you have? Maybe you don't need compat. On the other
hand, you can
do insmod -f which forces loading in some cases, like kernel version mismatch.
Good luck
Meka[ni]
--
[EMAIL PROTECTED] mailing list
o group. VOL
> works, but most programs like to use PCM. Any susgestions?
>
> --
> Cheers,
>
> John-Paul Andrusky
> <[EMAIL PROTECTED]>
>
>
Put 666 as a permision for /dev/sound/.* in /etc/devsd.conf
__
Meka[ni]
--
[EMAIL PROTECTED] mailing list
On Mon, 11 Aug 2003 00:41:17 +0200
Terje Kvernes <[EMAIL PROTECTED]> wrote:
> (subject lowercased)
>
> "Meka[ni]" <[EMAIL PROTECTED]> writes:
>
> > I've seen that my friend has no problem with bttv, but I can
> > not find it. I&#x
How can I make (and post) portage? There is a package I would like to have as
a portage,
but I think it is easier to make it my self than asking someone to do it for me. Thax.
:o)
__
Meka[ni]
--
[EMAIL PROTECTED] mailing list
> I've already linked /etc/localtime to
> /usr/share/zoneinfo/Canada/Eastern, and date on both Gentoo and RH9 show
> its using EDT. So is there something I mist in the documentation?
>
> Tom
>
>
> --
> [EMAIL PROTECTED] mailing list
>
In /etc/rc
I've seen that my friend has no problem with bttv, but I can not find it. I've
compiled
everything under v4l but there is no bttv module. My kernel is 2.6.0-test3. Where to
find
that module? Thanx
__
Meka[ni]
--
[EMAIL PROTECTED] mailing list
Is there a program for converting kmail's mails to sylpheed-claws? Thanx
__
Meka[ni]
--
[EMAIL PROTECTED] mailing list
Is there an option to make the windows maximized when starting a program. I've
tried with
-geometry 800x600,0,0 but it doesn't work for every program. Am I doing something
wrong?
Thanx ppl. :o)
__
Meka[ni]
--
[EMAIL PROTECTED] mailing list
How can I change the colour of the background in scite. I know how to change
font colour
but I can't figure out how to do it for background. Thax. :o)
__
Meka[ni]
--
[EMAIL PROTECTED] mailing list
On Mon, 4 Aug 2003 08:10:45 +0200
Robert Arroyo i Andreu <[EMAIL PROTECTED]> wrote:
> El Lunes, 4 de Agosto de 2003 08:08, Meka[ni] escribió:
>
> # tar tfvjp /usr/portage/distfiles/portage-2.0.48-r5.tar.bz2
> drwxr-xr-x root/root 0 2003-07-18 18:36:30 portage-2.0.48-r5/
iling list
>
Try to unpack it by hand with "tar xfvjp portage-2.0.48-r5.tar.bz2". If it
still reports
the same problem, the archive is broken. Good luck :o)
__
Meka[ni]
--
[EMAIL PROTECTED] mailing list
chmod +s
`which reboot`" and that's it. Later souliton is only solution for "halt". Pay
attention
on ` sign. It must be ` (left of the 1 on alfanumeric part of the keyboard) and not '
(left of the "Enter").
__
Meka[ni]
--
[EMAIL PROTECTED] mailing list
ssword = gost
Dial Command = ATDP
Auto Reconnect = 0
Auto DNS = 1
Idle Seconds = 300
Dial Attemts = 10
Stupid Mode = 1
New PPPD = 1
Is there maybe a problem with /etc/peers/wvdial nad /etc/peers/wvdial-pipe?
__
Meka[ni]
--
[EMAIL PROTECTED] mailing list
t; in /etc/make.conf and recompile. Maybe this will help.
But you can
allways emerge -C kdelibs.
__
Meka[ni]
--
[EMAIL PROTECTED] mailing list
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 M1L0
ISDN = 0
Modem Type = Analog Modem
Phone = 487
Username = xxx
Password = yyy
Dial Command = ATDP
Auto Reconnect = 0
Auto DNS = 1
Idle Seconds = 300
Dial Attemts = 10
Stupid Mode = 1
New PPPD = 1
What am I doing wrong? Thanx. :o)
______
or 1
> make[1]: Leaving directory `/var/tmp/portage/gedit-2.2.2/work/gedit-2.2.2'
> make: *** [all-recursive-am] Error 2
>
> !!! ERROR: app-editors/gedit-2.2.2 failed.
> !!! Function gnome2_src_compile, Line 41, Exitcode 2
> !!! compile failure
>
>
> --
> [EMAIL PROTECTED] mailing list
I've had the same problem. Linking solved the problem (at least for me :o).
Good luck.
--
Meka[ni]
--
[EMAIL PROTECTED] mailing list
r me because I like to know
when there is a command and when there is not while I am jumping on Tab key.
:o) Mouse scroll stil doesn't work. Can you send me your configuration?
Thanx.
--
Meka[ni]
--
[EMAIL PROTECTED] mailing list
something else?
Second problem is PC speaker. I have no sound from it with new kernel.
Do I miss some modules? Thanx and keep hacking. :o)
--
Meka[ni]
--
[EMAIL PROTECTED] mailing list
something else?
Second problem is PC speaker. I have no sound from it with new kernel. Do I
miss some modules? Thanx and keep hacking. :o)
--
Meka[ni]
--
[EMAIL PROTECTED] mailing list
ut it didn't help. What to do? Yes, I've read
samba documentation, but I didn't do it carefull enough I gues. Thanx a lot.
:o)
--
Meka[ni]
--
[EMAIL PROTECTED] mailing list
Paulo Jorge de Oliveira Cantante de Matos writes:
Hi all,
I've downloaded a movie and the sound is very low in my laptop even when
I put totem volume bar in the maximum and the gnome sound bar also in
the maximum. Is there a way to amplify the sound so I can hear it?
Best regards,
Paulo J.
> This works for me:
>
> /dev/hda8 /mnt/winvfatrw,user,umask=000
> 0 0
>
> Regards,
It's working great. Thanx. :o)
--
Meka[ni]
--
[EMAIL PROTECTED] mailing list
this?
>
> Thanks
> Prabhat
xset is the command you need. man xset and read it. I've never had the need
to chage it so I don't know the actual command line, but ... I hope this
helps. xset -q will give you the current settings. Good luck. :o)
--
Meka[ni]
--
[EMAIL PROTECTED] mailing list
#x27;ve heard
something about threading is getting beter. Is this true or I've got my
magination do the trick? Thanx. :o)
--
Meka[ni]
--
[EMAIL PROTECTED] mailing list
Frank J. Mattia writes:
check the man pages for mount and fstab... id say that its a very easy
thing to do... that is, unless the windows partitions are on separate
computers.
Oh yes. I've forgot to tell you. This is my fstab:
/dev/hda4 / reiser rw 0 0
/dev/hda3 none swap sw 0 0
/d
Is there any way to let non-root users to read/write to Windows partitions?
Thanx. :o)
--
[EMAIL PROTECTED] mailing list
Lisa works perfectly, but how can I give names for all those IP's I see?
Thanx a lot. :o)
--
[EMAIL PROTECTED] mailing list
so files? They are
called shared objects and are made with -fPIC.
--
Meka[ni]
--
[EMAIL PROTECTED] mailing list
x27;s the mistake. Try including support for atapi cd. I don't
belive that ide-scsi is driver for it self, but just on top of atapi cd.
Maybe I'm wrong, but doesn't hurt to try. :o) Good luck. :o)
--
Meka[ni]
--
[EMAIL PROTECTED] mailing list
ding -ffast-math would'n be bad. It is not agresive even for those
programs that are CFLAGS buggy, but it means a lot for the performance. Good
luck. :o)
--
Meka[ni]
--
[EMAIL PROTECTED] mailing list
I fix this (or has anyone done
it). Thanx
--
Meka[ni]
--
[EMAIL PROTECTED] mailing list
/cpuinfo. There are all the information you need for CFLAGS
(line starting with "flags :"). Compare CFLAGS and those flags and ... good
luck. :o)
--
Meka[ni]
--
[EMAIL PROTECTED] mailing list
On Monday 07 July 2003 20:44, drewbian wrote:
> On Wed, 2003-07-09 at 19:14, Meka[ni] wrote:
> > How can I use those files placed in /usr/share/cursors/xfree? And how
> > and where to find and install themes for X? Thanx :o)
>
> Hi,
> I just have this file
>
>
How can I use those files placed in /usr/share/cursors/xfree? And how and
where to find and install themes for X? Thanx :o)
--
Meka[ni]
--
[EMAIL PROTECTED] mailing list
t;
It very easy. You need to install samba and configure it. Usualy,
documentation from
samba it self is enough to figure out how to configure it. Next you need to do is to
share
distfiles (that's one line in smb.conf) and to mount it under (laptop's) distfiles.
That's
i
I have 2 users in same group (gid 1001), but one can't login (using su) as
another user. What to do?
--
[EMAIL PROTECTED] mailing list
> try
> xsetbg -full /path/to/image.jpg
I don't have that command. Can you tell mi what package is it in?
____
Meka[ni]
--
[EMAIL PROTECTED] mailing list
that it's gqview's only option, but that it is some command from the
XFree.
Does anyone knows am I right? Thax guys. :o)
Meka[ni]
--
[EMAIL PROTECTED] mailing list
e. Do you know of some other? I use zgv for
images,
but if you have any other, it would be nice to share it with us.
Meka[ni]
--
[EMAIL PROTECTED] mailing list
ll) and everything was fine (it crashes sometimes on
some mails, but I think that patches from portage will fix this). I've even tried to
fix
the configure script by findig out what is the command producing so much output. I've
noticed that it is "yes = no", but I can't find the
e c h o i c e o f a
> //_/_//_/\_,_/ /_/\_\ G N U g e n e r a t i o n . . .
>
>
> --
> [EMAIL PROTECTED] mailing list
>
It seams like you didn't compile support for your file system. If your root
file system
is reiser, support must be compiled in the kernel (not as module). Good luck! :o)
Meka[ni]
--
[EMAIL PROTECTED] mailing list
I know that it is posible to run gtk plug-in for licq (jones) but I don't know
how to
emerge it. Is there anyone who made it happen? Tnx!!!
Meka[ni]
--
[EMAIL PROTECTED] mailing list
How can I rc-update add default so that command set up volume of all
sliders? I
know how to do it with aumix but it doesn't control all of the sliders. Tnx ppl. :o)
Meka[ni]
--
[EMAIL PROTECTED] mailing list
gplflash (I thing it's the only open
source).
____
Meka[ni]
--
[EMAIL PROTECTED] mailing list
My terminal is runing fbdev/vesa on 800x600. Is there a way to change refresh
rate? My
eyes are burning. :o)
Meka[ni]
--
[EMAIL PROTECTED] mailing list
When I emerge gcc and try to compile kdelibs (for example), I get:
"no STL type found"
What to do? It suggested to install libstdc++-devel. I think it's installed with gcc,
but
... maybe I'm wrong. Please help. Tnx
Meka[ni]
--
[EMAI
> that the only uncommented line reads "iface_eth1="dhcp"", used
I think, that's the problem. Try eth0. I'm 80% sure that will do the job
Meka[ni]
--
[EMAIL PROTECTED] mailing list
Alsa is reporting that the files included from blahblah are redefineing some
macroes.
What to do? I had alsa 0.9.3c and tried to compile 0.9.4-r1 but no succes. After that
I've
tried to compile 0.9.3c again and it failed too. What now? Tnx
Meka[ni]
--
[EMAIL PROTECTED] ma
r1
> sys-libs/db-3.2.9-r2
> x11-libs/gtk+-2.2.1
> x11-libs/gtk+-1.2.10-r10
>
Just don't tuch glib. I've removed it from my box and it wasn't able to
compile most of
the programs.
Meka[ni]
--
[EMAIL PROTECTED] mailing list
Is there a program similar to Catalog Max. The problem is that my base
(about 500 CDs) is in Catalog Max, and I would like to erase Windows from my
disk. Thx ppl
--
[EMAIL PROTECTED] mailing list
, but I do not
> know what it's supposed to do.
I've found it too, and that's why I'm asking this.
Meka[ni]
--
[EMAIL PROTECTED] mailing list
I've red that this kind of encryption is the best (OpenBSD uuse it by
default), and I'm
wondering if I can use it on Gentoo. I know that SuSE can us it and why would they be
better? :o) By the way, how can I know what kind of encryption I'm using right now? Tnx
ppl
_
if I switch to other terminal and switch back, I'm not able to do that any more. Is
there
a way to enable this? Thanx guys!!!
Meka[ni]
--
[EMAIL PROTECTED] mailing list
How can I create bootable Gentoo CD (if I can)?
Meka[ni]
--
[EMAIL PROTECTED] mailing list
of this
happens. My box is Celeron (Mendocino) 300A, S3 Savage3D AGP, 224MB SDRAM. What to do?
Meka[ni]
--
[EMAIL PROTECTED] mailing list
98 matches
Mail list logo
