On Thu, 31 Mar 2005, Patrick Marquetecken wrote:
> > Actually, I also see there de4x5 module which is the one mentioned in the
> > txt file. Anyway, Im hoping one of those will have support for ethtool.
> Bad luck, the machine freeses when it bringup a network interface
These are the tulip module
> On Wed, 30 Mar 2005, Patrick Marquetecken wrote:
>
>> > Reading through /usr/src/linux/Documentation/networking/de4x5.txt I
>> see
>> > this chipset is supported by the dc2114x module - have you tried using
>> > that driver instead?
>> >
>> No but i will going to, accoording to several sites i f
On Wed, 30 Mar 2005, Patrick Marquetecken wrote:
> > Reading through /usr/src/linux/Documentation/networking/de4x5.txt I see
> > this chipset is supported by the dc2114x module - have you tried using
> > that driver instead?
> >
> No but i will going to, accoording to several sites i found with go
> On Tue, 29 Mar 2005, Patrick Marquetecken wrote:
>
>> > Can you run 'lspci' and show output? (If you dont have lspci then run
>> > "emerge pciutils").
>> :11:04.0 Ethernet controller: Digital Equipment Corporation DECchip
>> 21140 [FasterNet] (rev 22)
>> :11:05.0 Ethernet controller: Dig
On Tue, 29 Mar 2005, Patrick Marquetecken wrote:
> > Can you run 'lspci' and show output? (If you dont have lspci then run
> > "emerge pciutils").
> :11:04.0 Ethernet controller: Digital Equipment Corporation DECchip
> 21140 [FasterNet] (rev 22)
> :11:05.0 Ethernet controller: Digital Equi
> On Thu, 24 Mar 2005, Patrick Marquetecken wrote:
>
>> I have installed a Adaptec ANA-6944A/TX fast 4 port ethernet card
>> (32-bit).
>> It works fine with the tulip dirver.
>> If i run ethtool on these ports i always get this error, never with my
>> other networdcards.
>>
>> vpn_bxl init.d # eth
On Thu, 24 Mar 2005, Patrick Marquetecken wrote:
> I have installed a Adaptec ANA-6944A/TX fast 4 port ethernet card (32-bit).
> It works fine with the tulip dirver.
> If i run ethtool on these ports i always get this error, never with my
> other networdcards.
>
> vpn_bxl init.d # ethtool eth3
> S
Hi,
I have installed a Adaptec ANA-6944A/TX fast 4 port ethernet card (32-bit).
It works fine with the tulip dirver.
If i run ethtool on these ports i always get this error, never with my
other networdcards.
vpn_bxl init.d # ethtool eth3
Settings for eth3:
No data available
what coult this be?
