Randy Barlow wrote:
> pat wrote:
I have problem with uploading some sorts of the files by seamonkey (e.g.
*.pdf,
>
>> The folder selection box is opened, so I choose the folder (with rwx
>> permissions
>> for the user) click OK, but file is not saved.
>
> Generally, you can't upload a
Markus Schönhaber wrote:
> Daniel Pielmeier wrote:
>> You can try to rename the ebuild according to the new version and add it
>> to your overlay, maybe it just works.
>
> I'll try it.
A minor change to the ebuild to reflect the different numbering scheme
of the beta driver's package was necess
Aleksandar L. Dimitrov wrote:
> I did something rather dirty today. I downloaded the newest Nvidia Beta
> Drivers and copied it over to /usr/portage/distfiles under the same
> name the in-portage driver had. So while portage thinks the old drivers
> are installed - that's not the case :)
Oh yes,
>> I did something rather dirty today. I downloaded the newest Nvidia Beta
>> Drivers and copied it over to /usr/portage/distfiles under the same
>> name the in-portage driver had. So while portage thinks the old drivers
>> are installed - that's not the case :)
>
> Oh yes, dirty ;-)
> I assume yo
Daniel Pielmeier wrote:
> The result is the same, but creating an ebuild and putting it an overlay
> is a much more cleaner way of doing it.
ACK. I did it that way. I didn't mention in my previous post that I did
put the new ebuild into an overlay, though.
Regards
mks
--
[EMAIL PROTECTED] mai
Hello,
I just found out that 'noatime' mount option is ignored on my system for
/ (root) partition. In /etc/fstab I have entry for /:
/dev/sda6 / ext3 noatime,usrquota,grpquota
and 'mount' command shows:
/dev/sda6 on / type ext3 (rw,noatime,usrquota,grpquota)
but /proc/mount
Am Sonntag 13 Mai 2007 15:48 schrieb Robert Cernansky:
> Hello,
>
> I just found out that 'noatime' mount option is ignored on my system for
> / (root) partition. In /etc/fstab I have entry for /:
>
> /dev/sda6 / ext3 noatime,usrquota,grpquota
>
> and 'mount' command shows:
>
> /
Hi,guys!
I use iptables to let the PCs in the subnet to connect the internet outside.
And i write a simple script,but it doesn't work:
#!/bin/sh
iptables -F
#Define packets from Internet server to Intranet
iptables -A FORWARD -d 198.168.1.0/24 -i eth0 -j ACCEPT
#Define packets from Intranet to I
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello Wu,
Instead of the commands you posted, you should use
echo 1 > /proc/sys/net/ipv4/ip_forward
iptables --table nat -A POSTROUTING -s 192.168.8.0/24 -j MASQUERADE
Long explanation:
The first command enables the kernel to _forward_ packets from
Hi there,
I've been asked something strange. I have to take a video input and split it
in three parts, sending it to three outputs simultaneously.
The first thing I thought of was creating a pipe, sending there the video and
trying to read from there. I did my firsts tests with mplayer, but as
On Tuesday 08 May 2007 12:53, Hans-Werner Hilse wrote:
> Hi,
>
> On Mon, 7 May 2007 23:12:31 +0100 Mick <[EMAIL PROTECTED]>
>
> wrote:
> > =
> > $ echo $TERM
> > rxvt
> >
> > $ sudo echo $TERM
> > rxvt
> > =
> > which is the same like my Gentoo box.
>
> That doesn't
Javier Krausbeck wrote:
> Hi there,
>
> I've been asked something strange. I have to take a video input and split it
> in three parts, sending it to three outputs simultaneously.
>
> The first thing I thought of was creating a pipe, sending there the video and
> trying to read from there. I did
Robert Cernansky wrote:
> and 'mount' command shows:
>
> /dev/sda6 on / type ext3 (rw,noatime,usrquota,grpquota)
>
> but /proc/mounts does not show noatime option:
>
> /dev/root / ext3 rw,data=ordered,usrquota,grpquota 0 0
Hmm, same thing here:
# grep "/ " /etc/mtab
/dev/hda9 / reiserfs rw,noatim
My ADSL connection had a short outage yesterday. I discovered, to my
consternation, that my machine's internal modem wasn't being picked up.
This is a 1999 Dell PIII that refuses to die. The PCI modem has worked
in the past under Redhat and Gentoo. I am aware that I have to allocate
more than
On Sunday 13 May 2007 21:12, Mick wrote:
> I've tried bind -p | grep history and it did not work:
> ==
> $ sudo bind -p | grep history
> Password:
> sudo: bind: command not found
> ==
bind is a builtin bash command, I
On Sun, 13 May 2007 21:28:41 +0200 Benno Schulenberg <[EMAIL PROTECTED]> wrote:
> Robert Cernansky wrote:
> > and 'mount' command shows:
> >
> > /dev/sda6 on / type ext3 (rw,noatime,usrquota,grpquota)
> >
> > but /proc/mounts does not show noatime option:
> >
> > /dev/root / ext3 rw,data=ordered,u
Neil Walker wrote:
Maybe I should take a closer look at AHCI - especially as it seems
Intel are listed as a sponsor, so it must have their approval. :)
Well, it didn't work - just resulted in a kernel panic. It seems AHCI is
only supported by SOME ICH6,7,8 interfaces. :(
Be lucky,
Neil
Neil Walker <[EMAIL PROTECTED]> writes:
> Well, it didn't work - just resulted in a kernel panic. It seems AHCI
> is only supported by SOME ICH6,7,8 interfaces. :(
Did you select AHCI mode in the BIOS? On my motherboard (with
ICH6R/IC6RW) there is an option to set SATA mode to IDE, RAID or AHCI
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
But I have no idea where to start. Frankly, so many possibilities and
incredibly complex setups have deterred me somewhat from embarking on
this venture. However, I would very much like to have my very own email
server under my own domain name.
So w
Hello !
I advise you to take a look at
http://gentoo-wiki.com/HOWTO_Email:_A_Complete_Virtual_System .
I've used this howto to make my email server and all works fine now.
It's composed of Postfix + Spamassassin + SQLGrey + ClamAV coupled with
MySQL database for me or PGSQL as in the howto.
Regar
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hey there, thanks for the tip! I didn't expect to find a complete
HOWTO, as I said, but then again I've never seen a HOWTO that big.
Question, though. Do I need to do anything very special to use MySQL
instead of PGSQL?
Thanks again,
- ---
dantheh
Helmut Jarausch schrieb:
> The following steps were successful (for me)
>
> echo "app-emulation/virtualbox-bin additions dvitool" >> \
> /etc/portage/package.use
> emerge app-emulation/virtualbox-bin# here 1.3.8-r1
>
> create the virtual machine (WinXP in my case) as described
> and i
On Sunday 13 May 2007, YoYo Siska wrote:
> > I've been asked something strange. I have to take a video input and split
> > it in three parts, sending it to three outputs simultaneously.
> > The first thing I thought of was creating a pipe, sending there the video
> > and trying to read from there
On 2007-05-13, Javier Krausbeck <[EMAIL PROTECTED]> wrote:
>> mkfifo f1
>> mkfifo f2
>> mkfifo f3
>> mplayer whatever_options_you_want_and_make_it_write_to_stdout | tee f1
>
>> | tee f2 >f3
>
>> and then reading from f1, f2, f3 doesn't do the thing you want ?
>
> Just one caveat, mplayer does no
On Sun, May 13, 2007 at 05:44:45PM -0400, Dan Cowsill wrote:
> But I have no idea where to start. Frankly, so many possibilities and
> incredibly complex setups have deterred me somewhat from embarking on
> this venture. However, I would very much like to have my very own email
> server under my
On Sunday 13 May 2007, Grant Edwards <[EMAIL PROTECTED]> wrote
about '[gentoo-user] Re: Real time video streaming (was: Help playing
simultaneously splitted videos (sort of))':
> On 2007-05-13, Javier Krausbeck <[EMAIL PROTECTED]> wrote:
> >> mkfifo f1
> >> mkfifo f2
> >> mkfifo f3
> >> mplayer
2007/5/13, Fabio A Correa <[EMAIL PROTECTED]>:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello Wu,
Instead of the commands you posted, you should use
echo 1 > /proc/sys/net/ipv4/ip_forward
iptables --table nat -A POSTROUTING -s 192.168.8.0/24 -j MASQUERADE
I have tried.But still not work
Dan Cowsill wrote:
> However, I would very much like to have my very own email
> server under my own domain name.
You should really have a static public IP address for that.
> So what I'm asking you guys for is documentation, software packages,
> recommended setups, anything you can add. I am no
Chuanwen Wu wrote:
> Chain POSTROUTING (policy ACCEPT)
> target prot opt source destination
> MASQUERADE all -- 192.168.1.0/24 anywhere
>
> Chain OUTPUT (policy ACCEPT)
> target prot opt source destination
>
>
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Hey there, thanks for the tip! I didn't expect to find a complete
> HOWTO, as I said, but then again I've never seen a HOWTO that big.
>
> Question, though. Do I need to do anything very special to use MySQL
> instead of PGSQL?
You just have t
I am new to Gentoo, and working on getting things up and going. I am
running an HP Pavilion with an Athlon 64 processor. I'll build a
desktop eventually when I have the time, but for now this is it.
I am attempting to install the x86 version of Gentoo from the i686
stage3 tarball, and so far hav
31 matches
Mail list logo
