[gentoo-user] Mailman trouble

roblem and found a solution? Worst case scenario, how do I move my existing lists to a fresh installation of mailman? -- Regards / Venlig hilsen Johannes Skov Frandsen /You live and learn. At any rate, you live. [Marvin]/ -- gentoo-user@lists.gentoo.org mailing list

Re: [gentoo-user] Mailman trouble [SEMI-SOLVED]

kashani wrote: Johannes Skov Frandsen wrote: Anybody had the same problem and found a solution? Worst case scenario, how do I move my existing lists to a fresh installation of mailman? http://forums.gentoo.org/viewtopic-t-641573-highlight-.html There are a couple twists. You'll ne

[gentoo-user] Mailman problems

efined boundary Any hints or help appreciated. If more info is needed please let me know. -- Regards / Venlig hilsen Johannes Skov Frandsen /You live and learn. At any rate, you live. [Marvin]/ -- gentoo-user@lists.gentoo.org mailing list

Re: [gentoo-user] [SOLVED] Mailman problems

Johannes Skov Frandsen wrote: Hi everybody Im running mailman v. 2.1.9, and things had been running well until today where I decided to add another list. I tried to add a list from the webinterface but got an error about not properly configured vhost. After some searching I found the

Re: [gentoo-user] Mailman wont start

>Johannes Skov Frandsen wrote: >> mailman # /etc/init.d/mailman start * Starting mailman ... [ !! ] >> >> Obliviously something did not went as plan, but I can't seem to find >> anything in the log files (/var/log/mail.*). Am I looking the wrong place? &

Re: [gentoo-user] Mailman wont start

Johannes Skov Frandsen wrote: >> Johannes Skov Frandsen wrote: >> >>> mailman # /etc/init.d/mailman start * Starting mailman ... [ !! ] >>> >>> Obliviously something did not went as plan, but I can't seem to find >>> anything in th

[gentoo-user] Starting cruisecontrol -> initscript

und: > /etc/init.d/config.xml Any pointers or help would be greatly appreciated. This is my first attempt on writing a initscript so bare with me if I have missed something obvious. -- Regards / Venlig hilsen Johannes Skov Frandsen *Address:* Egelundsvej 18, DK-5260 Odense S *Web:* www.omesc.com | *Email:* [EMAIL PROTECTED] -- [EMAIL PROTECTED] mailing list

[gentoo-user] Ical and evolution

ample.com/._passwd Require valid-user Any ideas why Evolution will not allow access to the ics when using basic http authentication? -- Regards / Venlig hilsen Johannes Skov Frandsen *Address:* Egelundsvej 18, DK-5260 Odense S *Web:* www.omesc.com | *Email:

[gentoo-user] Tomcat+portlet

f you know some good links to info about running tomcat-6 on gentoo I would love to get my hands on them as well. -- Regards / Venlig hilsen Johannes Skov Frandsen *Address:* Egelundsvej 18, DK-5260 Odense S *Web:* www.omesc.com | *Email:* [EMAIL PROTECTED] -- [EMAIL PROTECTED] mailing list

[gentoo-user] Ati 3d not working

ave include my log and my config if they could be useful in clearing up the issue. Any help or pointer appriciated. -- Regards / Venlig hilsen Johannes Skov Frandsen X Window System Version 1.3.0 Release Date: 19 April 2007 X Protocol Version 11, Revision 0, Release 1.3 Build Operating System:

Re: [gentoo-user] Ati 3d not working

Manager (XFree86 4.1.0 and higher DRI support) Graphics support ---> <*> Support for frame buffer devices <*> ATI Radeon display support [*] DDC/I2C for ATI Radeon support [*] Support for backlight control Otherwiser please hint me on what to set. -- Regar

Re: [gentoo-user] Ati 3d not working [SOLVED]

help/54709-ati-direct-render-problem.html> > > hope it helps > > 2007/9/25, Johannes Skov Frandsen <[EMAIL PROTECTED] <mailto:[EMAIL > PROTECTED]>>: > > Rafael Barrera Oro wrote: > > ¿how are your kernel settings regarding acceleration? >

[gentoo-user] eclipse

pointer? -- Regards / Venlig hilsen Johannes Skov Frandsen *Address:* Egelundsvej 18, DK-5260 Odense S *Web:* www.omesc.com | *Email:* [EMAIL PROTECTED] -- [EMAIL PROTECTED] mailing list

[gentoo-user] Re: Eclipse

gards / Venlig hilsen Johannes Skov Frandsen * * -- [EMAIL PROTECTED] mailing list

[gentoo-user] Masked packages

ain't to happy... it prints out: Invalid atom in /etc/portage/package.keywords: dev-php5/phpunit-3.0.5 Any suggestions/help would be appreciated. - -- Regards / Venlig hilsen Johannes Skov Frandsen *Address:* Egelundsvej 18, DK-5260 Odense S *Web:* www.omesc.com | *Email:* [EMAIL PROTECTED] -

[gentoo-user] re: Masked packages

Hi Removing the version number did the trick. Thanks everybody. -- Regards / Venlig hilsen Johannes Skov Frandsen -- [EMAIL PROTECTED] mailing list

[gentoo-user] dr.dk

he 'v4l' and 'v4l2' flag, as I expect they are needed. Help much appreciated. - -- Regards / Venlig hilsen Johannes Skov Frandsen -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFGH2r0JIVu+Wuhu/4

Re: [gentoo-user] dr.dk

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hans-Werner Hilse wrote: > Hi, > > On Fri, 13 Apr 2007 13:35:16 +0200 Johannes Skov Frandsen > <[EMAIL PROTECTED]> wrote: > >> I can't seem to play streaming radio from http://www.dr.dk. I followed >> one of th

Re: [gentoo-user] Subversion 1.4.3

Nistor Andrei wrote: > On Monday 30 April 2007, Johannes Skov Frandsen wrote: > >> Hi >> >> I have currently installed version 1.3.2-r3 of subversion, but I have >> installed th latest version of subclipse (svn plugin for the eclipse >> platform), and now I c

[gentoo-user] Problems starting X

ECTED] ~ $ Is there a config file I have mised or I have compiled my kernel with ATI support to the best of my knowlege.(my shell is running nicly in 1920*1200 so i guess it must be using my graphiccard right). If its any help, linux seems to think I'm using a CRT monitor when

Re: [gentoo-user] Problems starting X

e to make GCC_VER_MAJ=4 KVER=2.6.20-gentoo-r7 KDIR=/usr/src/linux kmod_build. !!! If you need support, post the topmost build error, and the call stack if relevant. !!! A complete build log is located at '/var/tmp/portage/x11-drivers/ati-drivers-8.32.5/temp/build.log'. Any hint on what could be the problem? Johannes Skov Frandsen -- [EMAIL PROTECTED] mailing list

Re: [gentoo-user] Problems starting X

Francisco Rivas wrote: > Hi Johannes and every friend of the list :D. > > Johannes two things: > > 1.- I think (i guess) it's better install the 8.36.5 ati drivers, because > the 8.32.5 ati drivers is too bugs and is better have the actual > driver, you > can download from the ati page and put on t

Re: [gentoo-user] Problems starting X

Aleksandar L. Dimitrov wrote: > On Thu, 2007-05-10 at 10:45 +0200, Johannes Skov Frandsen wrote: > >> I should then be using version 8.28.8 of the driver. >> >> I have tried coping both the 8.28.8 and the 8.36.5 to my dist folder and >> tried to run emerge

Re: [gentoo-user] Problems starting X

Francisco Rivas skrev: Hi all friends, I really like this situations because we learn so much...I have to thank you to all for this experience... Well we got a lot of work to do for help Johannes. You fell confortable installing the ati-drivers manually?, if your aswer is Yes, then: 1.- Dis

Re: [gentoo-user] Problems starting X

Hi everybody Well the xorg server downgrade did not help either, so I abandon the cloesed source drivers from Ati and went on to try to install my S3 onboard savage graphic processor. This work almost instantly without any problems except for the fact that I experienced a lot of areas on the

Re: [gentoo-user] php+ctype_data

Stéphane ANCELOT wrote: > hi, > looks like ctype_data does not work with php5 ? is there a special use > flag ? or something else ? > Best Regards > Steph > Yes! just add: dev-lang/php ctype to: /etc/portage/package.use and re emerge php. -- Regards / Venlig hil

RE: [gentoo-user] Problems starting X

ike yourself guiding and helping me. I will strive to be just as dedicated when my experience reaches a level where I can be of help for this list. Regards Johannes Skov Frandsen -Original Message- From: Aleksandar L. Dimitrov [mailto:[EMAIL PROTECTED] Sent: 12. maj 2007 21:26 To: gent

Re: [gentoo-user] Re: xorg-7.2 and ati-drivers-8.32.5 - Thank you Gentoo devs

Hi everybody I currently have xorg 7.2 on a 2.6.20-r7 kernel. Can't get any of the binary drivers to work on my Radeon 9200 PRO card (as you might have read in previous posts), but the open source drivers works with a little tweaking of xorg.conf. I use the hardend profil. I had the followin

[gentoo-user] Can't start apache

Hi everybody I just installed apache 2.2.4-r1 on my server. When I try to start it just after it has been emerge I get this error: # /etc/init.d/apache2 start * Starting apache2 ... apache2: apr_sockaddr_info_get() failed for marvin apache2: Could not reliably determine the server's fully qual

Re: [gentoo-user] Can't start apache [solved]

Randy Barlow skrev: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Johannes Skov Frandsen wrote: The server obviously don't s start, but I get no error messages and I can't locate the server log (httpd.conf suggest they are located in /usr/lib/apache2/ but htere is no logs there).

Re: [gentoo-user] Can't start apache [solved]

Johannes Skov Frandsen skrev: Randy Barlow skrev: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Johannes Skov Frandsen wrote: The server obviously don't s start, but I get no error messages and I can't locate the server log (httpd.conf suggest they are located in /usr/lib/apache2/

Re: [gentoo-user] Can't start apache [solved]

Boyd Stephen Smith Jr. wrote: Did you install php before or after apache? It probably needs to be recompiled against your current version. I'm stuck with a mod_ruby that gives the same error and won't recompile right now I installed php first so you could be right about the recompiling...

Re: [gentoo-user] Can't start apache [solved]

Johannes Skov Frandsen wrote: Boyd Stephen Smith Jr. wrote: Did you install php before or after apache? It probably needs to be recompiled against your current version. I'm stuck with a mod_ruby that gives the same error and won't recompile right now I installed php first so yo

[gentoo-user] Can't see windows servers on network from gnome

gnome. I have seen this work in distroes like ubuntu but how do I enable it in Gentoo. I would expect them to be listed under places->network serveres. Regards Johannes Skov Frandsen -- [EMAIL PROTECTED] mailing list

[gentoo-user] postfix - how to test

/postfix start and everything seems to be ok but... how do I test that it actual works ? testing if apache works is easy, you just go to http://localhost and see if something happens, but how do I test if postfix actual sends my mail? -- Regards / Venlig hilsen Johannes Skov Frandsen *Address

Re: [gentoo-user] postfix - how to test

Hans-Werner Hilse wrote: > Hi, > > On Fri, 01 Jun 2007 08:07:33 -0500 Albert Hopkins <[EMAIL PROTECTED]> > wrote: > > >> On Fri, 2007-06-01 at 14:45 +0200, Johannes Skov Frandsen wrote: >> >>> testing if apache works is easy, you just go to

Re: [gentoo-user] postfix - how to test

Hans-Werner Hilse wrote: > Hi, > > On Fri, 01 Jun 2007 16:29:56 +0200 Johannes Skov Frandsen > <[EMAIL PROTECTED]> wrote: > > >> Well I guess I should have expected it to rather simple to test. But I >> have never tried to configure a mailserver before

Re: [gentoo-user] postfix - how to test

5 (protocol 2.0) 25/tcp open smtpPostfix smtpd 631/tcp open ipp CUPS 1.2 Service Info: Host: home.mindfield.dk running: nc localhost smtp allows me to send mail so I guess I'm good next step is to install courier-imap so I might be back with other questions :-) -- Regards /

[gentoo-user] nic problem

upport But that doesn't seem to do the trick. Any help appreciated -- Regards / Venlig hilsen Johannes Skov Frandsen *Address:* Egelundsvej 18, DK-5260 Odense S *Web:* www.omesc.com | *Email:* [EMAIL PROTECTED] -- [EMAIL PROTECTED] mailing list

Re: [gentoo-user] nic problem

rebus_rdk wrote: > If lspci returns your NIC it should be fine, what does ifconfig -a says? > > I'm sorry, but i dont quite understand what part of your system doesn't > detect your network interface... > > On 6/11/07, Johannes Skov Frandsen <[EMAIL PROTECTED]> w

[gentoo-user] Can't login on Courier-imap server

mation. login [EMAIL PROTECTED] login NO Error in IMAP command received by server. Connection closed by foreign host. -- Regards / Venlig hilsen Johannes Skov Frandsen *Address:* Egelundsvej 18, DK-5260 Odense S *Web:* www.omesc.com | *Email:* [EMAIL PROTECTED] -- [EMAIL PROTECTED] mailing list

Re: [gentoo-user][solved] Can't login on Courier-imap server

Hans-Werner Hilse wrote: > Hi, > > On Wed, 13 Jun 2007 10:38:58 +0200 Johannes Skov Frandsen > <[EMAIL PROTECTED]> wrote: > > >> I have installed Courier-imap on my server and I'm trying to test it, >> which is not going that well... >> >> Wh

[gentoo-user] Mailman wont start

look? -- Regards / Venlig hilsen Johannes Skov Frandsen *Address:* Egelundsvej 18, DK-5260 Odense S *Web:* www.omesc.com | *Email:* [EMAIL PROTECTED] -- [EMAIL PROTECTED] mailing list